0140148 Idinio Smart Ceiling Light User Guide
- June 4, 2024
- idinio
Table of Contents
0140148 Idinio Smart Ceiling Light
Safety warning!
- Ensure you have fully read and understood the instructions in this document before you install or use the product following the installation/wire diagram (when applicable)
- Keep this document for future reference and only use the product as described in this document Any other use of the product than described in this manual may damage the product or cause injury to the user (eg. due to a short circuit, fire or electric shock) Disconnect the product from the power source if problems occur.
- Do not drop the product and avoid bumping.
- Do not use the product ifa part is damaged or defective.
- Replace a damaged defective product immediately.
- When a non-standard consumer (power)installation is required this should be performed by a qualified technician to reduce the risk of an electric shock.
- Make sure the product is sufficiently ventilated during9 use.
- Never cover an electrical (LED) device during usage since it can generate heat causing damage.
- Besides LED can be extremely bright and may cause serious eye damage so don’t stare at it directly.
- When a product is meant for indoor and/or outdoor use only, this will be mentioned on the product/parts or in the manual.
- Keep the product out of reach of children or animals.
What in the box
Download the ldinio Smart app from the Google Play or Apple App Store and
create a user account
This device only supports 2.4ACHz WiFi networks so when you own a 5CHz router
you must select the 24CHz network disable
the 5CHz network first in your router menu Refer to your router manual for
instructions
INSTALLATION
Add device
Ifadding the device failed, it may be a networking problem. You can now proceed using the AP Mode for adding the device
The bulb must Dink slowiy. If this iS not the case you must reset the device by turning the bulb on/oft/onj/of/on/off/on.
IPress+” and select’Lighting’ and choose the right luminaire.
- Tap ‘Other Mode’ in the top right corner and select ‘AP Mode’.
- Check if the connection light is flashing slowly. Press Confirm indicator slowly blinks. Then select your 2.4GHz network, password and confirm.
- Connect you smartphone or tablet with the device’s hotspot. Tap Connect. The app will now open the settings I menu of your smartphone or tablet. Open WiFi settings.
- Search the smart device name in the list of WiFi networks and connect. Devices will connect with each other. Now open the ldinio Smart app again and wait until the connection process is finished.
- Wait until the connection is successful.
Cleaning and Maintenance Warning!
- Do not use cleaning solvents or abrasives.
- Do not clean the inside of the device. Do not attempt to repair the device when the device does not operate correctly, replace it.
- Clean the outside of the device using a soft, damp cloth (don’t use microfiber cloth)
I Support:
If you need further elp or have comments or suggestions please visit
www.shada.nl/nl/contact
The item should be disposed of separately from household waste. The item should be handed in for recycling in accordance with local environmental regulations for waste disposal. By separating a marked item from household aste, you will I help reduce the volume of waste sent to incinerators or land- fill and minimize any potential negative impact on human health and the environment