LUDOMIDE LF-01 Ceiling Fan with Lights and Remote Instruction Manual
- June 1, 2024
- LUDOMIDE
Table of Contents
Socket Fan With Lights
Model No.: LF-01
Scan for installation video
Fixture Assembly
| Name | Specifications |
|---|---|
| Input Voltage | 85-265V —50/60Hz |
| Wattage | 40W |
| CCT | 3000K-6500K |
| Wind Speed | Soft wind/ Medium speed wind/ Strong wind |
| Memory Function | YES |
| Timing Function | YES |
| Sudden-stop Protection | YES |
| Control Mode | Remote Control / Wall Switch |
Installation
Step1: Make sure to cut off the power before installation.
Step2: Assemble the 6 fan blades as picture shown (The upward side is marked
on the fan blade: UP SIDE)
Step3: Install the whole lamp on the socket.
Step4: After Installation finished , turn on the power, you can use the fan
light by remote control.
Remote Control Instuction
NOTE: Please remove the plastic gasket before using the remote control.
CR2025 3V battery x 1pcs (included)
Note: Some parts may be assembled together in the package.
Safety Rules
- Even if we have a sudden stop protection, to reduce the risk of injury, please do not put fingers or other objects into the working fan blades.
- For daily cleaning, you can use a damp cloth to wipe the surface without using corrosive chemicals.
- The fan blades can also be disassembled directly, which is convenient for cleaning and storage.
Clean and Care
To clean, wipe fixture with soft cloth. Spray from chemical cleaners can discolor the finish of fixture. Do not use scouring pads, powders, steel wool or abrasive paper to clean this fixture.
Ordering Parts
Keep this manual for future reference, and in case replacement parts are
needed. Available parts can be ordered from place of purchase. Use exact
wording from diagrams when ordering parts.
Contact Information
Email: lightingcustomercare@gmail.com