idinio Smart Doorbell User Guide
- June 4, 2024
- idinio
Table of Contents
idinio Smart Doorbell
Your tablet or smartphone must be connected to a 2.4GHz WiFi network
Download the ldinio Smart app from the Google Play or Apple App Store and create a user account.
Basis netwerk benodigdheden, Basic network requirements, Anforderungen WLAN·Netzwerk • Conditions de base pour le niseau , Requisitos basicos de la red
This device only supports 2.4GHzWiR networks so when iou own a 5GHz router you must select the 24GHz network or disable the 5GHz netl.vork first in your router’ menu. Refer to your router manual for instructions.
Make sure that during the pairing process this device as well as your iOS or Android device will remain in the WiFi range of your router.
Box contents
OVERVIEW
installation
Disconnect your door chime cables and hardwire them before installing the View Dong!
Your door chime may look different.
Please refer to the manual of your existing chime for de-installation.
Connect the external power (12-24 VAC) through the bracket (and the angle adjuster) to the rear of the unit. The transformer of your existing wired doorbell can often be used to power the device. Remove the traditional chime and connect the 2 wires together to close the electric circuit.
Add device
When power in the fuse box is turned back on, the LED indicator will start blinking rapidly. If this is not the case you must reset the device by pressina the Reset button for 5 seconds
Launch the app and tap the ‘+’ in the top right corner
Select Camera and tap Vie>N Dong.
Tap Confirm indicator rapidly blinks’
I Select the right 2.4GHz WiFi network and password and tap ‘Confinn’
Press continue to have the app generate a QR code which needs to be scanned by the camera. Hold the QR ccx:le in front of the camera at 15-20cm.
Confirm that after scanning the QR code you heard a beep.
The appwill auto-connect with the device. Once the process is completed, it will prompt you to rename the dEMce. Enter a new-name and ‘Save’
WARNING
Safetywaming!
Ensure you have fully read and understood the instructions in this document
before you install or use the product following the installation/wire diagram
(when applicablel Keep this document for future reference and only use the
product as described in this document Arrtother use of the product than
described in this manual may damage the product or cause injury to the user
(e.g. due to a short circuit. fire or electricshockl
Disconnect the product from the power source if problems occur. Do not drop
the product and avoid bumping. Do not use the product if a part is damaged or
defective. Replace a damaged defective product immediately. When a non-
standard consumer {power)installation is required this should be performed by
a qualified technician to reduce the risk of an electric shock. Make sure the
product is sufficiently ventilated during use. Never cover an electrical
(LED)d evice during usage since it can generate heat causing damage. Besides
LED can be extremely bright and may cause serious eye damage so don’t stare at
it directly. When a product is meant for indoor and/or outdoor use only, this
will be mentioned on the product/parts or in the manual. Keep the product out
of reach of children or animals.
Cleaning a,d Malntenancewamlngl
Do not use cleaning solvents or abrasives. Do not clean the inside of the
device. Do not attempt to repair the device when the device does not operate
correctly. replace it Clean the outside of the device using a soft. damp cloth
(don’t use microfiber clothl
Support
If you need further help or have comments or suggestions please visit
www.shada.nl/nl/contact
The item should be disposed of separately from household waste. The item
should be handed in for recycling in accordance with local evironmental
regulations for waste disposal. By separating a
marked itemftom household waste, you will help reduce the volume of waste sent
to incinerators or land-fill and minimize any potential negative impact on
human health and the environment
This product carries the CE mark of certification, which confirms that this product meets EU safety, health and environmental protection requirements.
The full text of the EU declaration of conformity is available at the
following internet address: https://www.shada.nl/downloads.
Hierbij verklaard Shada dat 140110 01 View Dong welke is voorzien van
radioapparatuur voldoet aan richtlijn 2014/53/EU,
Molenmakershoek 28, NL-7328 JK APELDOORN-The Netherlands wwwshada.nl