lorelli PORTOFINO Electric Swing Instruction Manual
- June 13, 2024
- lorelli
Table of Contents
lorelli PORTOFINO Electric Swing Instruction Manual
Scan the QR code to get more product information and manual instruction in
more languages. Download QR Scanner App onto your device.b SRB/HR/ME/BIH
Installation Instruction
IMPORTANT! READ CAREFULLY AND KEEP FOR FUTURE REFERENCE!
SAFETY REQUIREMENTS
- WARNING! This product is suitable for use by babies ranging from 0 to 6 months old with a maximal weight of 9 kg.
- WARNING! Never leave the child unattended.
- WARNING! Do not use this product once your child can sit up unaided or weighs more than 9 kg.
- WARNING! This product is not intended for prolonged periods of sleeping.
- WARNING! Never use this product on an elevated surface (e.g. a table).
- WARNING! Always use the restraint system.
- WARNING! To avoid injury ensure that children are kept away when unfolding and folding this product.
- WARNING! Do not let children play with this product.
- WARNING! Do not move or lift this product with the baby inside it.
- WARNING! Toy bar is an additional article! Keep removed toy bar on a safety place! Never use the toy bar to carry the product!
- WARNING! Never use on a soft surface (bed, sofa, cushion) since the product can tip over and cause suffocation in soft surfaces.
- WARNING! This article does not replace a cot or a bed. Should your child need to sleep, then it should be placed in a suitable cot or bed.
- WARNING! For domestic use only!
- WARNING! Regularly check for loose parts! Make routine inspection, regularly maintain, clean and/or wash the article!
- WARNING! Do not use this product if any components are broken or missing!
- WARNING !Images on the title page and in the instruction manual are only illustrative and may differ from the real product.
- WARNING! Before using the product for the first time, remove all advertising material from it as well as the materials used to attach them to the product.
CAUTION: This package contains small parts in its unassembled state!
-
On adjusting the backrest you must be sure that the mechanism is well locked in the chosen position.
-
Use the upright position only when child has developed enough upper body control to sit without
leaning forward. -
Do not leave the article near a switched on fan, heat sources, sharp objects and water containers.
-
Do not use accessories or replacement parts other than those approved by the manufacturer.
-
dult assembly is required.
-
Product features and decorations may vary from photographs.
16232:2013+A1:2018. EN 62115. EN 71
PARTS
Picture 1
ASSEMBLING
- Vertical bases – 2pcs. left and right
- Feet tube 2pcs
- Seat – 1pcs
- Toy bar – 1pcs.
- Adapter – 1pcs.
WARNING! It should be installed by adult.
- Open the supporting arm of the vertical bases as shown in Picture 2
- Insert the vertical bases into the feet tube until you hear a click. Picture 3
- Place the seat suspension tubes on the axes of the vertical bases. Picture 4.1. Place the fasteners in the sequence 2; 3: 4.
- Install the toy bar as is shown on Picture 5.
- The toy bar frame can be adjusted in 2 positions on front, 3 positions on back. Picture 6
SET UP AND USE
-
Description of the control panel. Picture 7
1.1. Swing. There are five levels to adjust the swing speed divided by (2) and (3) buttons. Above the buttons is the light indication (1) for the selected speed.
1.2. There are three types of time setting 8:15 and30 minutes. Press buton (5) once and light (6) will be on for 8 minutes. Press it second time, the light will be on for 15 minutes. Press it third time, the light will be on for 30 minutes. When setting time is reached, all functions will stop. If time setting function is not used, all using function will start working until power is off.
1.3. Music button. (4). Press the button to play the music. Press the button second, third and fourth
time for volume. Next pressing will stop the music. Next pressing will start next melody. -
Adapter (1) Picture 8- Insert DC plug (2) of adapter to DC receiver of chair (3). Insert the AC plug (1) into 100-240V 50/60Hz 0.2A Max AC socket.
WARNING !!! For your own safety, please, use only the original power adapter. Input voltage – AC 100-240 V 50/60Hz 0.2A Max / Output voltage: DC 5,8 V-800 mA (The manufacturer shall not be liable for any losses incurred due to use of power adapters other than the one specified. )Do not use damaged power adapters. Do not touch the plug of the power adapter with conductive materials, for example rings. Do not let the child to play with the adapter or with the batteries! Keep the adapter out of the reach of children when plugged in and has power! Transformers used with the infant swing are to be regularly examined for damage to the cord, plug, enclosure and other parts, and in the event of such damages, they shall not be used. The infant swing shall only be used with the recommended transformer. -
Batteries. When using battery power, disconnect the AC adapter from the mains and unplug it from the power socket of the product. WARNING! Otherwise, the product can not be used with battery power! This product use 4pcs. of batteries type AA 1,5 V LR6. Loosen the screws on the battery cover with a screwdriver. Open the cover. Picture 9. The battery should be placed in the battery slot with correct polarity,”+” and “-“!
CHANGE BATTERY
-
Loosen the screws on the battery cover with a screwdriver. Open the cover. -Place 4 pcs. 1,5 V type AA LR6 alkaline batteries (not included) as indicated in the inside of the battery compartment.
Tip: It is recommended the use of alkaline batteries for extended operation. -Reinstall the battery cover and tighten the screws with a screwdriver. Do not tighten excessively. -
If the product starts with malfunction, it may be necessary to reset the electronics. Remove batteries and then insert them again.. -When the sound begins to weaken or stop, it’s time to change the battery by an adult!
BATTERIES SAFETY INFORMATION
WARNING! In some special condition, from the battery may leak the liquid,
which may cause a chemical burn or damage the product. To avoid battery’s
leakage: -Do not mix old and new batteries or different types of batteries
like alkaline, standard (carbon-
zinc) or rechargeable batteries (Ni-Cr) – Please insert the batteries as
indicated inside of the battery compartment.
– If you don’t use this product for a long time, please remove the batteries.
Exhausted batteries are to be removed from the infant swing. Please carefully
dispose the waste batteries. Do not dispose the batteries in to the fire. The
battery may explode or leak.
-Do not cause short circuit of the batteries terminal. -Use only the same batteries or batteries from one type as is required.
-Do not recharge non rechargeable batteries. -Take out the batteries from the product before recharging.
– If you use rechargeable batteries, the charging should be under adult
control.
4. Recline the seat as pushing the buttons on the side of the seat and
rotating up or down.
5. Locking mechanism. To use as a fixed seat, press the lock button. Picture
10 will affect the life span of motor.
WARNING! The electric swing rocking function must be stopped when swing
is locked, or it 6. Folding. 1. Fold the seat. 2. Stand on front of one foot
and press the folding buttons on both sides simultaneously and fold. Repeat
the procedure for the other foot. Picture 11.; 3. Fix the snap fastener of the
seat. 7. Connect the belt with the buckle as shown in Picture 12.
SECURE YOURCHILD
WARNING: Always use the restraint system ! Picture 13 Place your child
into the seat.
Position the restraint pad between your child’s legs. Fasten the waist belts
to each side of the restraint pad. Make sure you hear a “Click”on both sides.
Check to be sure the restraint system is securely attached by pulling it away
from your child. The restraint system should remain attached. Tighten each
waist belt so that the restraint system is snug against your child. Adjusting
the length of the belts: Adjust the waist belts with pressing of the button
and sliding of the buckle (Picture 14) and the shoulder belts with sliding of
the buckle (Picture 15).
MAINTENANCEANDCARE
- Wash the pad with cold water and soft soap. Dry naturally
- Do not use bleach. Tumble dry separately on low heat and remove promptly. 2. The frame, toy bar and toys may be wiped clean using a mild cleaning solution and a damp cloth. Do not use harsh or abrasive cleaners. Rinse clean with water to remove residue. Do not immerse the frame or the toys.
STORAGE
- Remove the batteries and store away from children.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>