FLAME SHADE CHTBR19SQ-1 Composite Umbrella Base User Manual
- May 15, 2024
- FLAME SHADE
Table of Contents
FLAME SHADE CHTBR19SQ-1 Composite Umbrella Base
Specifications
- Product Name: Composite Umbrella Base
- Material: Plastic and Metal
- Weight: Varies based on model
- Compatibility: Fits umbrella poles with diameters of 38mm and 48mm
Product Usage Instructions
Before You Start
Before assembling and using the composite umbrella base, ensure you have
all the parts listed in the parts list.
Assembly Instructions
Step 1:
Place the plastic stem washer and the umbrella stem over the hole in the
umbrella base. Secure from the underside using the washer, spring washer, and
bolt. Tighten firmly with the provided wrench.
Step 2:
Check the outside diameter of your umbrella pole. If it is 38mm, leave both
the 38mm and 48mm spacers in place inside the stem. If the pole diameter is
48mm, remove the 38mm spacer and keep the 48mm spacer in place to ensure a
snug fit for the umbrella pole into the stem.
Step 3:
Insert the umbrella pole into the umbrella base stem and hand-tighten the
tension screw. Be cautious not to overtighten as it may damage the umbrella
pole.
FAQ
-
Q: What should I do if my umbrella shows signs of stress or moves excessively?
A: If your umbrella shows signs of stress or moves excessively even when properly weighted, it indicates strong winds. Close and secure the umbrella immediately to prevent damage or injury. -
Q: How can I contact customer support for assistance?
A: For customer support, please email [email protected] for assistance regarding the composite umbrella base.
COMPOSITE UMBRELLA BASE
PLEASE READ CAREFULLY AND RETAIN FOR FUTURE REFERENCE
SAFETY WARNING
This umbrella base is designed to secure your patio umbrella in calm conditions only, where there is no breeze or wind.
- NEVER open or operate a patio umbrella in wind conditions greater than 5mph (8kph).
- NEVER use the umbrella tilt function in any wind (even a light breeze).
- ALWAYS close the umbrella when unattended or not in use. If you are not sitting under it, the umbrella should be closed and secured.
- ALWAYS use storage straps to properly secure the canopy to the frame when the umbrella is closed.
- ALWAYS use a correctly weighted base for the size of the umbrella being used; more weight is always better than less weight, especially if you intend to use the umbrella in a freestanding situation.
- FAILURE TO CAREFULLY OBSERVE THESE SAFETY WARNINGS CAN RESULT IN DAMAGE TO YOUR UMBRELLA BASE, UMBRELLA, OR PROPERTY AND IN EXTREME CASES PERSONAL INJURY.
IMPORTANT INFORMATION
If the umbrella is showing ANY signs of stress, or IF the umbrella begins to move around excessively even when properly weighted it indicates the wind is too strong and the umbrella must be closed and secured immediately.
CARE AND MAINTENANCE
- Regular application of a water displacing and penetrating oil to the metal parts of the umbrella base will help to protect them against surface corrosion (remember to treat the bolt and washers on the underside of the base).
- During any extended periods of non-use, especially through the winter months your umbrella and the umbrella base should be stored inside in a dry place.
BEFORE YOU START
- Check you have all the listed parts before you start assembling.
- In the event of missing or damaged parts, contact our customer support team at [email protected]
- We suggest assembling on a soft surface such as a drop sheet or rug to avoid scratching.
PARTS LIST
ASSEMBLY INSTRUCTIONS
Step 1
Place the plastic stem washer and the umbrella stem over the hole in the
umbrella base and fix from the underside of the base using the washer, spring
washer and bolt, tighten firmly using the wrench.
| Step 2
Check the outside diameter of your umbrella pole, if it is 38mm, then leave
both the 38mm and 48mm spacers in place inside the stem, if the pole diameter
is 48mm remove the 38mm plastic spacer leaving the 48mm spacer in place, so
that the umbrella pole fits snugly into the umbrella stem.
---|---
Step 3
Place the umbrella pole into the umbrella base stem and hand tighten the
tension screw.
CAUTION: Take care not to overtighten as this may damage the umbrella pole.
CUSTOMER SUPPORT
Please reach out to our support team before leaving any negative review or
feedback on Amazon. Your complete satisfaction matters to us, so if our
product hasn’t met or exceeded your expectations, or if you are having
problems with assembly, missing or damaged parts, before you do anything else
please email our support team directly, let us know the full details of the
issue (attaching clear pictures to your email will always help us to better
understand exactly what’s gone wrong).
We promise to respond to your email within 24 hours, and we guarantee that we
will fix the problem to your complete satisfaction.