Panasonic AT2105 Car Navigation User Manual

June 6, 2024
Panasonic

AT2105 Car Navigation
User Manual

Audio Section/Radio Section

Operating Function Button No. /Name Performing Specifications
Transition to the radio mode (Softkey) AM,FM ①Select Audio icon ( ) in the

short cut menu, push “Source” button at the  bottom of the screen, then push “Radio”.②Select “FM Radio” or “AM Radio” to  go to FM/AM mode.③To receive radio broadcast, touch frequency in the  bottomo of screen.
Panasonic AT2105 Car Navigation - figure 1
Reading/writing of the preset memory.| (Softkey) Favorite| In FM/AM mode, by pressing the “Heart mark” in the top-right of the screen, you can set/remove arbitrary frequency to/from preset memory.
Panasonic AT2105 Car Navigation - figure 2

USB Section

Operating Function Button No./Name Performing Specifications
Transition to the USB mode (Softkey) USB ①Select Audio icon ( ) in the

shortcut menu, push the “Source” button at the bottom of the screen, then push “USB”. ※Volume name of USB media is shown in the source list.

Playback / Pause| (softkey)
| If is pressed while playing, this unit pauses.
If is pressed while pausing, this unit starts playing.

iPod Section

Operating Function Button No./Name Performing Specifications
Transition to the iPod mode (Softkey) iPod ①Select Audio icon ( ) in the

shortcut menu, push the “Source” button at the bottom of the screen,  then push “iPhone”. ※Volume name of iPod/iPhone is shown in the source list.

Playback / Pause| (softkey)
| If is pressed while playing, this unit pauses.
If is pressed while pausing, this unit starts playing.

Bluetooth Section/Registration method of Bluetooth device

Operation Method Screen Display Specifications

①Touch Gear icon ( ) in the shortcut menu.
②Touch “Bluetooth & devices” in the menu.| Panasonic AT2105 Car Navigation -
figure 5
③Touch “Manage devices”, then touch “Search devices” in the bottom-right of the screen. Meantime, set the smartphone to waiting for a BT connection.| Panasonic AT2105 Car Navigation - figure 6
④You can see the available devices list in the bottom-right of the window, then select the device that you want to connect.| Panasonic AT2105 Car
Navigation - figure 7
⑤You may see passcode on both H/U and smartphone. Then Approve both.| Panasonic AT2105 Car Navigation - figure 8
⑥BT paring established successfully.
You may need to approve on a smartphone to transfer the phonebook.| Panasonic AT2105 Car Navigation - figure 9

*Cold start erase all BT paring.

Handsfree Section

Operating Function Button No./Name Performing Specifications
Transition to the telephone  menu screen (softkey) Phone ①Select Phone icon

( ) in the shortcut menu.
②Select the function you want to use from the phone menu.
Panasonic AT2105 Car Navigation - figure 10
Outgoing| (softkey) Keypad| Select “Keypad” from the phone menu to go to the dial screen.
Push the numeric button to enter a phone number, push ( ) to start a phone call.
Panasonic AT2105 Car Navigation - figure 11

Audio Setup Section

Operating Function Button No./Name Performing Specifications
Transition to the audio setup adjustment screen (Softkey) Sound ①Select

Setting( ) from the shortcut menu.
②Select “Sound & Media” from the Settings menu.
③Select “Sound tuning” from “Sound & Media”.

Bass/Mid/Treble,| (softkey) Bass/Mid/Treble| To Adjust Treble/Mid/Bass, drag the slider to the left (low) or right (high).
Panasonic AT2105 Car Navigation - figure 13
Balance/Fader| (softkey) Balance/Fader| To Adjust Balance/Fader, drag the pointer or press adjust button.
Panasonic AT2105 Car Navigation - figure 14

Location
A vehicle location is displayed by GPS, and a direction is detected with a gyroscope. Panasonic AT2105 Car Navigation - figure 15Panasonic AT2105 Car Navigation - figure
16

Since this device is always used with vehicles, it is not sold to general end users separately. Therefore there is no user manual for this device by alone.
The following statements must be described on the user manual of the vehicle;
[For FCC] FCC ID : ACJ932AT2105
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC CAUTION:
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Radiofrequency radiation exposure information:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

IC: 216J-AT2105
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is  subject to the following two conditions:

  1. This device may not cause interference.
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the ISED radio frequency (RF) Exposure rules.  This equipment should be installed and operated keeping the radiator at least 20cm or more away from the person’s body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals