idinio 61413 Smart Bulb User Guide
- June 4, 2024
- idinio
Table of Contents
idinio 61413 Smart Bulb User Guide
Basic Network Requirements
This device only supports 2.4GHz WiFi networks so when you own a 5GHz router you must select the 2.4GHz network or disable the 5GHz network first in your router’ menu. Refer to your router manual for instructions.
Add Device
Make sure that during the pairing process this device as well as your iOS or
Android device will remain in the WiFi range of your router.
Place the bulb. The bulb will start blinking rapidly. If this is not the case
you must reset the device by turning the bulb on/off/on/off/on/off/on.
Your tablet or smart phone must be connected to a 2.4 GHz.
Download the Idinio Smart app from the Google Play or Apple App Store and
create a user account.
Press ‘+’ and select ‘Lighting’ and choose the right bulb.
Select the right 2.4GHz WiFi network and password and tap ‘Confirm’.
Confirm that the bulb is
blinking rapidly.
The app will auto-connect with the device. Once the process is completed.it will promote to you to rename the device. Enter a new name and ‘save’.
If adding the device failed , it maybe a networking problem. You can now proceed using the AP Mode for adding the device.
The bulb must blink slowly. If this is not the case you must reset the device by turning the bulb on/off/on/off/on/off/on.
Press ‘+’ and select ‘Lighting’ and choose the right bulb.
Tap ‘Other Mode’ in top right corner and select ‘AP Mode’.
Check if the connection light is flashing slowly. Press ‘Confirm indicator slowly blinks’. Then select your 2.4GHz network, password and confirm.
Now connect you smartphone or tablet with the device’s hotspot. Tap ‘Connect’. The app will now open the settings menu of your smartphone or tablet. Open WiFi settings.
Search the smart device name in the list of WiFi networks and connect. Devices will connect. Now open the ldinio Smart app again and wait until the connection process is finished.
Wait until the connection is successful.
WARNING
Safety warning!
Ensure that you have fully read and understood the instructions in this document before you install or use the product following the installation/wire diagram (when applicable). Keep this document for future reference and only use the product as described in this document. Any other use of the product than described in this manual may damage the product or cause injury to the user (e.g. due to a short circuit, fire or electric shock). Disconnect the product from the power source when problems occur. Do not drop the product and avoid bumping. Do not use the product if a part is damaged or defective. Replace a damaged defective product immediately. When a non-standard consumer (power)installation is required this should be performed by a qualified technician to reduce the risk of an electric shock. Make sure the product is sufficiently ventilated during use. Never cover an electrical (LED)device during usage since it can generate heat causing damage. Besides LED can be extremely bright and may cause serious eye damage so do not stare at it directly. When a product is meant for indoor and/or outdoor use only, this will be mentioned on the product/parts or in the manual. Keep the product out of reach of children or animals.
Cleaning and Maintenance Warning!
Do not use cleaning solvents or abrasives. Do not dean the inside of the device. Do not attempt to repair the device. Replace the device when it does not operate correctly. dean the outside of the device using a soft, damp cloth (Do not use a microfiber cloth).
Symbols
-
Caution! Risk of electric shock.
-
Non dimmable. Only dimmable by the app.
-
IP20: IIK20 – Protected from touch by fingers and objects greater than 12 millimeters.
-
The Item should be disposed of separately from household waste.
-
This product carries the CE mark, which confirms that this product meets EU safety, health and environmental protection requirements. https://www.shada.nlidownloads.
-
Hierbij verklaard Shade 140116 Smart WiFi 6U10 lamp welke is voorzien van radioapparatuur voldoet aan richtlijn 2014/53/EU. https://www.shadanl/downloads.
QR Code:
Support
If you need further help or have comments or suggestions please visit:
www.shada.nl/nl/contact
Molenmaker shoek 28, NL-7328
JK APELDOOR11 The Netherlands
www.shada.nt
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>