idinio 0140137 WiFi Smart Plug 10A with Power Meter User Guide
- June 5, 2024
- idinio
Table of Contents
idinio 0140137 WiFi Smart Plug 10A with Power Meter
SMART PLUG
- your tablet or smartphone must be connected to a 2.4GHz WiFi network
- Download the ldinioSmart app from the Google Play or Apple App Store and create a user account.
ldinio app
- Thisdeviceonlysupports2.4GHzWiFi networks so when you own a 5GHz router you mustselectthe2.4GHz nelwolkordisable the 5GHz network first in your route( menu. Refer to your router manual for instructions.
- Make sure that during the pairing process this device as well as your iOS or Android device will remain in the WiFi range of your router.
Installation
- On/Off/Reset switch
- Power up the device. The LED indicator will start blinking rapidly. I f this is not the case you must reset the device by pressing the power button for approximately 5 seconds.
warning
- Do not stack multiple devices
Add device
- Launch the app and tap the ‘+’ in the top right corner
- Slect Electrical Accessories and tap ‘Power View 2’.
- Tap ‘Confirm indicator rapidly blinks’
- Select the right 2.4GHz WiFi network and password and tap ‘Confirm’
- The app will auto-connect with the device. Once the process is completed, it will prompt you to rename the device. Enter a ne\lV name and ‘Save’
- “On: power is on, press power-icon to tum off the device Off: power is off. press power-icon to turn on the device Press Power view 2-icon for all settings Offline: connection lost”
AP Mode
- If adding the device failed, it maybe a networking problem. You can now proceed using the AP Mode for adding the device
- Press the On/Off button for 5 seconds and make sure thatthe device lights are flashing slow.
- Tap the’+’ icon in the top right corner, then select ‘Electron Accessories, then select “Power View2
- Tap ‘Other Mode’ in top right corner and select ‘AP Mode
- Check if the connection light is flashing slowly. Press ‘Confirm indicator slowly blinkS. Then select your 2.4CHz network, password and confirm.
- NoW Connect you smartphone or tablet with the devIce’s hotspot. lap connect. Ihe app will now open the settings menu of vour smartphone or tablet. Open WiFi settings.
- Search the smart device name in the list of WiFi networks and connect. Devices Will connect. Now open the Idinio Smart app again and wait until the connection process is finished
- Wait until the connection is successful.
warning
safety warning
Ensure you have fully read and understood the instructions in this document
before you install or use the product following the installation/wire diagram
(when applicable). Keep this document for future reference and only use the
product as described in this document Any other use of the product than
described in this manual may damage the product or cause injury to the user
(e.g. due to a short circuit fire or electric shock). Disconnect the product
from the power source if problems occur. Do not drop the product and avoid
bumping. Do not use the product if a part is damaged or defective. Replace a
damaged defective product immediately. When a non-standard consumer
(power)installation is required this should be performed by a qualified
technician to reduce the risk of an electric shock Make sure the product is
sufficiently ventilated during use. Never cover an electrical (LED) device
during usage since it cangenerate heat causing damage. Besides LED can be
extremely bright and may cause serious eye damage so don’t stare at it
directly. When a product is meant for indoor and/or outdoor use only, this
will be mentioned on the product/parts or in the manual. Keep the product out
of reach of children or animals.
Cleaning and Malntenancewamlng!
Do not use cleaning solvents or abrasives. Do not clean the inside of the
device. Do not attempt to repair the device when the device does not operate
correctly, replace it Clean the outside of the device using a soft. damp cloth
(don’t use microfiber cloth)
Support
If you need further help or have comments or suggestions please visit
www.shada.nl/nl/contact
- EN ICaution! Risk of electric shock.
- The item should be disposed of separately from household waste. The item should be handed in for recycling in accordance with local environmental regulations for waste disposal. By separating a marked item from household waste. you will help reduce the volume of waste sent to incinerators or land-flatland minimize ary potential negative impact on human health and the environment.
- This product comes the CE mark of certification, which confirms that this product meets EU safety, health, and environmental protection requirements