idinio LDR06211 Smart Camera with Sensor User Guide

June 6, 2024
idinio

LDR06211 Smart Camera with Sensor
User Guide

View Out 3 Floodlight WiFi Camera

Scan for product info. & manual

LET’S MEET ONLINE www.shada.nl/idinio
Your tablet or smartphone must be connected to a 2.4GHz WiFi network
Download the line Smart app from the Google Play or Apple App Store and create a user account

|
---|---
https://itunes.apple.com/nl/app/idinio/id1457970650?mt=8| https://play.google.com/store/apps/details?id=com.smart.ledsgo

Basic network requirements.
This device only supports 24GHz WiR networks so when you own a 5GHz router you must select the 2.4GHz network or disable the 5GHz network first in your router’s menu. Refer to your router manual for instructions Make sure that during the pairing process this device as well as your iOS or Android device will remain in the WiFi range of your router.

Add device

When the power in the fuse box is turned back on, the LED indicator will start blinking rapidly. If this is not the case you must reset the device by pressing the Reset button for 5 seconds.
Launch the app and tap the ‘+’ in the top right corner Select Camera and tap View Out 3 Floodlight WiFi Camera.
Tap ‘Confirm indicator rapidly blinks’  Select the right 2.46Hz WIFi network and password and tap Confirm’
Press continue to have the app generate a QR code that needs to be scanned by the camera. Hold the QR code in front of the camera at 15-20cm
Confirm that after scanning the QR code you heard a beep. The app will auto- connect with the device. Once the process is completed, it will prompt you to rename the device. Enter a new name and leave’ If adding the device failed. it may be a networking problem You can now proceed using the AP Mode for adding the device. Press the Reset button for 5 seconds and make and that the device lights are flashing slowly.
Launch the app and tap the ‘+’ in the top right corner
Select Camera and tap View Out 3 Floodlight WiFi Camera.
Tap ‘Other Mod& in top right corns and select ‘AP Mode’. Check if the connection light is flashing slowly. Press ‘Confirm indicator stet; ly blinks’. Then select your isCstz network password and confirm
Now connect your smartphone or tablet with the device’s hotspot Tap Connect’. The app will now open the settings menu of your smartphone or tablet Open WI settings.
Search the smart device name in the list °MN networks and connect Devices will connect Now open the Idinio Smart app again and wait until the connection process is finished
Wait until the connection is successful
WARNING

**** Safety warning!

Ensure you have fully read and understood the instructions in this document before you install or use the product following the installation/wire diagram (when applicable). Keep this document for future reference and only use the product as described in this document. Any other use of the product than described in this manual may damage the product or cause injury to the user (e.g. due to a short circuit, fire or electric shock). Disconnect the product from the power source if problems occur. Do not drop the product and avoid bumping. Do not use the product if a part is damaged or defective. Replace a damaged defective product immediately. When a non-standard consumer (power)installation is required this should be performed by a qualified technician to reduce the risk of an electric shock. Make sure the product is sufficiently ventilated during use. Never cover an electrical (LED) device during usage since it can generate heat causing damage. Besides LED can be extremely bright and may cause serious eye damage so don’t stare at it directly. When a product is meant for indoor and/or outdoor use only, this will be mentioned on the product/parts or in the manual. Keep the product out of reach of children or animals.

Cleaning and Maintenance warning!
Do not use cleaning solvents or abrasives. Do not clean the inside of the device. Do not attempt to repair the device when the device does not operate correctly, replace it. Clean the outside of the device using a soft, damp cloth (don’t use a microfiber cloth).
Support
If you need further help or have comments or suggestions please visit www.shada.nl/nl/contact
The item should be disposed of separately from household waste. The item should be handed in for recycling in accordance with local environmental regulations for waste disposal. By separating a marked item from household waste, you will help reduce the volume of waste sent to incinerators or land- fill and minimize any potential negative impact on human health and the environment.
This product carries the CE mark of certification, which confirms that this product meets EU safety, health, and environmental protection requirements.

Hierbij verklaard Shada dat 140155 View Out 3 Flood light WiFi Camera wel ke is voorzien van radioapparatuur voldoet aan richtlijn 2014/53/EU. De vol ledige tekst van de Europese Declaratie van Conformiteit is beschikbaar op het volgende internetadres: https://www.shada.nl/downloads.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals