EPROPULSION NE-RC00-00 Electric Outboards Evo Remote Control User Guide
- June 6, 2024
- EPROPULSION
Table of Contents
EPROPULSION NE-RC00-00 Electric Outboards Evo Remote Control
Fixing Guide for Remote Control
This is a guide for fixing the remote control on a flat surface of the boat. Please refer to the back-side of this card. The two bold circles indicate position of the two 5mm-deep-holes of the remote control. The M6×12mm screws in the package can be used to screw in the holes. If the length doesn’t match, users should adopt other screws (M6, Pitch 1mm). Please contact your local dealer or service@epropulsion.com. If you have any questions or feedback regarding this stationary operation. Your feedback is highly appreciated.
Guangdong ePropulsion Technology Limited Room 201, Bldg.17A, 4 Xinzhu Rd, Songshan Lake, Dongguan, Guangdong Province, China
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>