EPROPULSION DCS18100 eLite Solar Charger Instruction Manual

: May 15, 2024
: EPROPULSION

Table of Contents

EPROPULSION DCS18100 eLite Solar Charger
Product Usage Instructions
Introduction
Specifications
Operations
LED Indicator
Warranty
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

EPROPULSION DCS18100 eLite Solar Charger

Specifications

Battery Rated system voltage: 25.2V
Charging Voltage Range: 19 – 30V
MPPT Charging Voltage @ 25 C: 25.2V
CV Charging Voltage @25 C: 25.2V
Maximum CC Charging Current: 4A
PV Power Maximum Input: N/A
Charging Current: N/A
Open Voltage: N/A
MPPT Tracking Range: N/A
System MPPT Efficiency: N/A
Power Consumption: N/A
Temperature Protection: Yes
Storage/Operation Temperature: N/A
Storage/Operation Humidity: N/A
Altitude Protection Grade: N/A

Product Usage Instructions

Step 1: Connecting to eLite Electric Outboard Motor

A. Connect the solar charger to the eLite Electric Outboard Motor.

Step 2: Connecting to Power Source

Connecting to a Solar Panel:

Connect the solar charge controller to the solar panel.
The input voltage of the solar panel should be around 23V.

Connecting to a 12V Power Source:

First, connect the solar charge controller with the 12V Input Cable.
Then, connect the 12V Input Cable to the 12V power source on your boat or car.

LED Indicator
There is a bi-colored LED indicating the mode of the solar charger:

Blue: Mode indication 1
Red: Mode indication 2

FAQ

Q: Can I use the eLite Solar Charger with other electric motors?
A: The eLite Solar Charger is specifically designed for use with the eLite Electric Outboard Motor. It is recommended to use it only with compatible devices.
Q: What should I do if the LED indicator does not light up?
A: If the LED indicator does not light up, check the connections and ensure that the power source is functioning correctly. If issues persist, contact customer support for assistance.

eLite Solar
Charger Manual
Suitable for eLite Electric Outboard Motor

Introduction

Thank you for purchasing ePropulsion Solar Charge Controller. This solar charge controller is specially designed for eLite Electric Outboard Motor. Fast Maximum Power Point Tracking (MPPT) technology (efficiency ≥99.9%) precisely positions the maximum power point of PV cells thus drawing more Photovoltaic energy. With improved system efficiency, the charging conversion efficiency reaches as high as 90%. The controller is not only designed to work perfectly with a wide variety of solar panels with input voltage ≤18V. but also can get power from other sources with input voltage of 12V DC.

Declaration of Conformity
We Guangdong ePropulsion Technology Limited, hereby, declares that this equipment is compliance with the applicable Directives and European Norms, and amendments.

Object of the Declaration:Product:

Product: eLite Solar Charger
Model: DCS18100
The object of the declaration is in conformity with the following directives:
Electromagnetic Compatibility (EMC) 2014/30/EU
RoHS 2.0 Directive(RoHS) 2011/65/EU and (EU)2015/863

Applied Standards:

EN IEC 61000-6-3:2021
EN IEC 61000-6-1:2019
EN 62321-2:2014
EN 62321-3-1:2014
EN 62321-4:2014+A1:2017
EN 62321-5:2014
EN 62321-6:2015
EN 62321-7-1:2015
EN 62321-7-2:2017
EN 62321-8:2017

EC REP
Name: REP Europe GmbH
Address: Werner-von-Siemens-Str. 264319 Pfungstadt Germany Phone: +49 157 51253212
info@rep-europe.de

Manufacturer
Name: Guangdong ePropulsion Technology Limited
Address: Room 801, Building 1, 11 Daxue Road, Songshan Lake, Dongguan, Guangdong
Province, China

Signature:
Date: 2nd of Jan, 2023

Shizheng Tao, Chief Executive Officer & Cofounder of Guangdong ePropulsion Technology Limited

Statement
Operation is subject to the following three conditions:

This device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

Note:
This equipment has been tested and found to comply with the limits for a Class B digital de-vice, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasona-ble protection against harmful interference in a residential installation. This equipment gen-erates, uses and can radiate radio frequency energy and, if not installed and used in accord-ance with the instructions, may cause harmful interference to radio communications. Howev- er, there is no guarantee that interference will not occur in a particular installation. If this equip-ment does cause harmful interference to radio or television reception, which can be deter-mined by turning the equipment off and on, the user is encouraged to try to correct the interfer-ence by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Disposal and environment
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

Specifications

Battery

**** CE-EMC
ROHS
FCC-SDOC

Power Display| 1 Bi-colored LED
Weight| 403g
Dimensions| 100X82X23.5mm
12V Cable length| Approx. 1.3m

Operations

Step 1 : Connecting to eLite Electric Outboard Motor. $EPROPULSION-DCS18100-eLite-Solar-Charger- $3$$
Step 2 : Connecting to Power Source
- Connecting to a Solar Panel
  Connect the solar charge controller to the solar panel. $EPROPULSION-DCS18100 -eLite-Solar-Charger- $4$$ Input voltage of solar panel should be ≤ 23V
- Connecting to 12V Power Source
  First Connect the solar charge controller with the 12V Input Cable, then connect the 12V Input Cable to the 12V power source on your boat or car.

$EPROPULSION-DCS18100-eLite-Solar-Charger- $6$$

LED Indicator

There is a bio-colored LED indicating mode of the solar charger.

LED Color	LED Status	Mode
Blue	Steady light	Standby
Flashing Light slowly	Charging
Red	Flashing Light quickly	Error

Notes

Do not puncture, throw, drop, bend or modify the Solar Charge Controller.
The controller should be used in well ventilated, dry, particle free environment.
The controller should avoid direct sun exposure.
The aluminum case is an important means of heat dissipation, thus should not be covered. Opening the housing of the charger without prior written consent of the manufacturer voids the manufacturer’s warranty immediately.

Warranty

ePropulsion Solar Charge Controller is guaranteed against any manufacturing defects for TWO years from date of delivery of products to end customers.
Free warranty is only validated upon the presentation of legal serial number, Warranty Card, and evidence of purchase from an authorized ePropulsion dealer.

Conditions :
Valid date of purchase should be established by the first-hand purchaser with original sales slip.
Free warranty is not transferable and will not be reissued.
The warranty is valid only when the information is correct and complete.

Warranty does not cover:

Minor faults producing no influence on the intended function of the product.
Faults resulting from any improper operation that contradicts the user manual.
Accessories supplied with the product.
Damage caused by accident, misuse or unauthorized repair.
Damage caused by dropping, improper care or storage.

If warranty expires, users can still enjoy maintenance services from ePropulsion authorized dealers with minimum maintenance charge.

Packing List

Item	Qty.
Solar Charge Controller	1 Set
12V Input Cable	1 PC
Manual	1 PC
MC4 Connector Spanner	1 PC

Thanks for reading this user manual.
If you have any concerns or find any problems while reading, please don’t hesitate to contact us. We are delighted to offer service for you.