EPROPULSION DDR-60L-15 DCDC 48v-12v 60w Suitable E60 for Battery User Manual

EPROPULSION DDR-60L-15 DCDC 48v-12v 60w Suitable E60 for Battery

Specifications

• Output: 14V
• Rated current: 4A
• Max power: 60W
• Input Voltage Range: DC18-75V
• Efficiency: 92%
• Protection:
  • Overload protection
  • Overvoltage protection
  • Reverse polarity protection
  • Undervoltage lockout

Product Usage Instructions

Connection Method
To connect the E60/E163 to power a 12V device, follow these steps:

1. Connect the input wires of the DCDC to the corresponding polarity on the E Battery Bus Bar 150A.
2. Connect the E60/E163 to the corresponding polarity on the E Battery Bridging Cable.

Installation Instructions
Peel off the outer layer of the wire by 5 to 8mm, and use a crimping plier to crimp the terminals.

Warranty

Propulsion DCDC 48V-12V 60W is guaranteed against any manufacturing defects for TWO years from the date of delivery of products to end customers. Free warranty is only validated upon the presentation of a legal serial number, Warranty Card, and evidence of purchase from an authorized propulsion dealer.

Notes

• Do not reverse the input and output terminals.
• Do not reverse the positive and negative poles of the DCDC.
• Use the DCDC within the specified voltage range.

Introduction

• Thank you for purchasing Propulsion DCDC 48V-12V 60W.
• This DCDC is specially designed for E60/E163 Battery.

Specifications

Output

Rated Voltage| 14V
Rated current| 4A
Max power| 60W
Input
Voltage range| DC18-75V
Efficiency| 92%
Protection

Overload protection

| Constant current mode protection, automatically restores after abnormal conditions are removed.

Overvoltage protection

| Shuts off output, automatically restores after abnormal conditions are removed.

Reverse polarity

| Automatically restores through the power supply’s internal MOSFET after removing the load’s abnormal condition, without damage.
Undervoltage lockout| Output is turned off when the input voltage is less than 18VDC
Environment
Operating temperature| -40 to +85℃
Operating humidity| 5 to 95% RH ,No condensation
Altitude| 3000m

Certification

| ****

CE-EMC、CE-LVD、UKCA-LVD、UKCA-EMC、FCC

Dimension
Weight| 950 g
Dimensions| 148 X 66 X 56 mm
Cable Length| Input：500mm                   Output：500mm

Dimensions

Packing List

1.5mm²)

DCDC 48v-12v 60w User Manual| 1 pcs| /

Notes

• Do not reverse the input and output terminals.
• Do not reverse the positive and negative poles of the DCDC.
• Use the DCDC within the specified voltage range.
• The installation process requires the following tools: Phillips screwdriver, and wire crimping pliers (1- 5mm²).

Connection Method

Battery Bridging Cabke(Positive)

To connect the E60/E163 to power a 12V device, you will need to purchase the following additional materials:

①

|

E Battery Bus Bar 150A

|

1 set

| Connect the input wires of the DCDC to the corresponding polarity on the Bus

Bar.

②

|

E Battery Bridging Cable

|

1 set

| Connect the E60/E163 to the corresponding polarity on the Bus Bar.

To connect the E60/E163 to power a 12V device, you will need to purchase the following additional materials:

Installation Instructions

Warranty

• Propulsion DCDC 48V-12V 60W is guaranteed against any manufacturing defects for TWO years from the date of delivery of products to end customers.
• Free warranty is only validated upon the presentation of the legal serial number, Warranty Card, and evidence of purchase from an authorized propulsion dealer.

Conditions

• The valid date of purchase should be established by the first-hand purchaser with the original sales slip. The free warranty is not transferable and will not be reissued.
• The warranty is valid only when the information is correct and complete.

Warranty does not cover

• Minor faults produce no influence on the intended function of the product.
• Faults resulting from any improper operation that contradicts the user manual.
• Accessories supplied with the product.
• Damage caused by accident, misuse or unauthorized repair.
• Damage caused by dropping, improper care or storage.
• If the warranty expires, users can still enjoy maintenance services from propulsion-authorized dealers with minimum maintenance charges.

FAQ

What should I do if my DCDC is not working?
If your DCDC is not working properly, check the following:

• Ensure that the input and output terminals are correctly connected.
• Verify that the input voltage is within the specified range(DC18-75V).
• If the issue persists, contact propulsion-authorized dealers for further assistance.

How do I claim a warranty for my DCDC?
To claim a warranty for your DCDC, make sure you have the following:

• Legal serial number
• Warranty Card
• Evidence of purchase from an authorized propulsion dealer

Contact propulsion support with these details to initiate the warranty claim process.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>