EPROPULSION DDR-60L-15 DCDC 48v-12v 60W Suitable for E60 or E163 Battery User Manual
- June 12, 2024
- EPROPULSION
Table of Contents
DCDC 48v-12v 60w
User Manual
Suitable for E60/E163 Battery Model：DDR-60L-15
Please read this manual carefully before use.
Introduction:
Thank you for purchasing ePropulsion DCDC 48v-12v 60W.
This DCDC is specially designed for E60/E163 Battery.
Specifications:
Output
Rated Voltage| 14Vdc
Rated current| 4A
Max power| 60W
Input
Voltage range| 18-75Vdc
Efficiency| 92%
Protection
Overload protection| Constant current mode protection, automatically restores
after abnormal conditions are removed.
Overvoltage protection| Shuts off output, automatically restores after
abnormal conditions are removed.
Reverse polarity| Automatically restores through the power supply’s internal
MOSFET after removing the load’s abnormal condition, without damage.
Undervoltage lockout| Output is turned off when the input voltage is less than
18Vdc
Environment
Operating temperature| -40 to +85℃
Operating humidity| 5 to 95% RH ,No condensation
Altitude| 3000m
Certification| CE 、UKCA 、FCC
Dimension
Weight| 950 g
Dimensions| 148 X 66 X 56 mm
Cable Length| Input：500mm
Output：500mm
Dimensions:
Packing List:
| Item | Qty. | Remark |
|---|---|---|
| DCDC 48v-12v 60w | 1 set | / |
| Tapping Screw M4x12 | 4 pcs | / |
| Ring Terminals RNBL1-6-90D | 6 pcs | Wire Range: 22-16 A.W.G (0.51.5mm²) |
| DCDC 48v-12v 60w User Manual | 1 pcs | / |
Notes:
▲ Do not reverse the input and output terminals.
▲ Do not reverse the positive and negative poles of the DCDC.
▲ Use the DCDC within the specified voltage range.
● Installation process requires the following tools: Phillips screwdriver,
wire crimping pliers (1- 5mm²).
Connection Method:
To connect the E60/E163 to power a 12V device, you will need to purchase the following additional materials:
| No. | Item | Qty. | Operation |
|---|---|---|---|
| ① | E Battery Bus Bar 150A | 1 set | Connect the input wires of the DCDC to the |
corresponding polarity on the Bus Bar.
②| E Battery Bridging Cable| 1 set| Connect the E60/E163 to the corresponding
polarity on the Bus Bar.
Installation Instructions:
Warranty:
ePropulsion DCDC 48v-12v 60W is guaranteed against any manufacturing defects
for TWO years from date of delivery of products to end customers.
Free warranty is only validated upon the presentation of legal serial number,
Warranty Card, and evidence of purchase from an authorized ePropulsion dealer.
Conditions:
Valid date of purchase should be established by the first-hand purchaser with
original sales slip.
Free warranty is not transferable and will not be reissued.
The warranty is valid only when the information is correct and complete.
Warranty does not cover:
Minor faults producing no influence on the intended function of the product.
Faults resulting from any improper operation that contradicts the user manual.
Accessories supplied with the product.
Damage caused by accident, misuse or unauthorized repair.
Damage caused by dropping, improper care or storage.
If warranty expires, users can still enjoy maintenance services from
ePropulsion authorized dealers with minimum maintenance charge.