EPROPULSION BB-4W-150A E Battery Bus Bar User Manual
- June 13, 2024
- EPROPULSION
Table of Contents
E Battery Bus Bar 150A
User Manual
Model: BB-4W-150A
Introduction:
Thank you for purchasing ePropulsion E Battery Bus Bar 150A. This Bus Bar is specially designed for E60/E163 Battery.
Specifications:
Each set of E Battery Bus Bar 150A includes 1pcs for positive, and 1pcs for negative.
| Maximum Current | 150A |
|---|---|
| Inside cable connection | M5x16mm,2pcs |
| Outside cable connection | E Battery Power Cable Connector,2pcs waterproof |
connector,2pcs
Dimensions:
In the Box:
| Item | Qty. | Note |
|---|---|---|
| E Battery Bus Bar Positive | 1 set | / |
| E Battery Bus Bar Negative | 1 set | / |
| Socket Wrench | 1 pcs | / |
| Hexagon Cap Nuts M3(Spare material) | 4 pcs | / |
| Tapping Screw M3x10 | 8 pcs | / |
| Ring Terminals RNB5-6-90D | 6 pcs | Wire Range:12-10 A.W.G(4-6mm²) |
| Ring Terminals RNBL1-6-90D | 6 pcs | Wire Range:12-10A.W.G(0.5-1.5mm²) |
| EBattery Bus Bar 150a User Manual | 1 pcs | / |
Notes:
When using the bus bar, the Operation current should not exceed 150A.
Battery Bus Bar Positive is only intended for connecting to the positive
terminal, and E Battery Bus Bar Negative is only intended for connecting to
the negative terminal. Wrong connection may cause a short circuit.
- Before connecting the E Battery Bus Bar 150A with the third party product, please contact ePropulsion authorized distributor.
- Ensure electrical connections are correctly tightened !
- The installation requires the following tools: Phillips screwdriver or 8mm hex socket, 1-5mm² wire crimping plier, electrical tape.
Connection Method:
| SN. | Method | Operation |
|---|---|---|
| 1 | Connect the E Battery Power Cable Connector | Connect the integrated DC |
output cable to the aviation socket of the bus bar.
2| Connect the E Battery Charger using waterproof connectors| Connect the E
Battery Charger using waterproof connectors
3| Connect the DCDC 48v-12v 60w using waterproof connectors| Connect the E
Battery Charger usingwaterproof connectors
Installation Instructions:
Warranty:
ePropulsion E Battery Bus Bar 150A is guaranteed against any manufacturing
defects for TWO years from date of delivery of products to end customers.
Free warranty is only validated upon the presentation of legal serial number,
Warranty Card, and evidence of purchase from an authorized ePropulsion dealer.
Conditions:
Valid date of purchase should be established by the first-hand purchaser with
original sales slip.
Free warranty is not transferable and will not be reissued.
The warranty is valid only when the information is correct and complete.
Warranty does not cover:
Minor faults producing no influence on the intended function of the product.
Faults resulting from any improper operation that contradicts the user manual.
Accessories supplied with the product.
Damage caused by accident, misuse or unauthorized repair.
Damage caused by dropping, improper care or storage.
If warranty expires, users can still enjoy maintenance services from
ePropulsion authorized dealers with minimum maintenance charge.