BRANDSON 305419 Outdoor Sensor for Radio Weather Station Instruction Manual
- June 6, 2024
- BRANDSON
Table of Contents
305419 Outdoor Sensor for Radio Weather Station
Instruction Manual
Thank you for choosing a BRANDON product. Please read the following user manual carefully so as to get the most from the product you have purchased. Before using the product, first check that the delivered item is complete, accurate and undamaged.
Scope of delivery
- Outdoor sensor
- User manual
Technical data
| Power supply | Two 1.5 V AA batteries |
|---|---|
| Temperature range | -40°C to +60°C |
| Temperature resolution | 0.1°C |
| External sensor protection class | IPX4 |
| Transmitting power | 7 dBm |
| Frequency range | 433 MHz |
| Humidity | 1% to 99% in 1% increments |
| Dimensions (WxHxD) | 61 mm x 113 mm x 40 mm |
| compatible weather stations | 303457; 303717; 304304; 304465 |
Do not use this device if it is damaged. Do not expose the main unit to
moisture and also direct sunlight. The outdoor sensor is splash-waterproof and
should not be exposed to continuous and direct rain. An ideal location would
be a covered place in the shade.
This device is intended only for private use and not for medical purposes or
for public information.
Caution!
Keep the batteries and the device out of the reach of children. Batteries
contain harmful acids. Weak batteries should be replaced as soon as possible
to prevent leakage! Never use new and old batteries or batteries of different
types together.
Never throw batteries into the fire and do not short-circuit them. Do not
recharge the batteries and do not take them apart. There is a risk of
explosion!
Product details
Initial use
Take the product out of the package and remove all the packaging material.
Open the battery compartment of the outdoor sensor and insert two 1.5V AA
batteries.
Pay attention to the correct polarity of the contacts.
Connection with the outdoor sensor
- Select the desired channel using the “Channel” button in the battery compartment of the outdoor sensor.
- After start-up, the weather station attempts to connect with the outdoor sensor. Ensure that both devices are within one another’s range.
If the main unit cannot establish a connection with the outdoor sensor within
2 minutes, then it stops searching. The connection symbol stops flashing.
If a connection cannot be established, then this could be, for example, due to
thick walls, or to the long distance of the sensor from the main unit. In this
case, position the sensor and the main unit closer to each other to restart
the scanning.
Caution! For detailed information on how to connect the outdoor sensor with the corresponding weather station, please refer to the user manual of the weather station.
Safety instructions and disclaimer
Never try to open the device to repair or make modifications. Avoid contact
with the mains voltage. Do not short-circuit the product. The device is not
waterproof, hence please use it only in dry surroundings. Protect it from high
humidity, water, and snow. Keep the device away from high temperatures.
Do not expose the device to sudden changes in temperature or strong
vibrations, as this could damage the electronic components. Check the device
for any damage before using it. The device should not be used if it was
subject to impact or has been damaged in some other manner. Please comply with
the local regulations and restrictions. Do not use the device for purposes
other than those described in the user manual. This product is not a toy. Keep
it out of the reach of children or mentally disabled persons.
Any repair or modifications to the device, which is not carried out by the
original supplier will void any warranty and guarantee claims. The device
should only be used by those who have read and understood this user manual.
The specifications of the device may be changed without prior notice.
Disposal instructions
In line with the European WEEE directive, electrical and electronic devices should not be disposed of along with the domestic waste. Their components have to be separately sent for recycling or disposal, because improper disposal of toxic and dangerous components may permanently damage the environment. According to the electrical and electronic equipment act (ElektroG), you are obliged (as a consumer) to return (free of charge) all electrical and electronic devices to the manufacturer, the point of sale, or public collection points at the end of their service life. The relevant local laws regulate the details in this regard. The symbol displayed on the product, in the user manual, or/and on the packaging refers to these regulations. With this manner of sorting, recycling, and disposal of used devices, you make an important contribution towards protecting our environment.
Instructions for battery disposal
In conjunction with the sale of batteries along with the supply of devices that include batteries, the supplier is obliged to point out the following to the customer: The customer is legally obliged to return used batteries. He can return used batteries which the supplier offers or has offered as new batteries in his assortment free of charge to the supplier’s dispatch warehouse (shipping address). The symbols shown on the batteries indicate the following: Pb = battery contains more than 0.004 percent lead by weight, Cd = battery contains more than 0.002 percent cadmium by weight, Hg = battery contains more than 0.0005 percent mercury by weight.
The symbol of the crossed-out dustbin means that the battery may not be
disposed of in the household waste.
WEEE directive 2012/19/EU
WEEE Register no.: DE 67896761
The company WD Plus GmbH hereby certifies that the device 305419 complies with
the fundamental requirements and all other relevant stipulations of the
directive 2014/53/EU.
A complete conformity statement can be obtained from: WD Plus GmbH,
Wohlenbergstraße 16, 30179 Hannover, https://www.ganzeinfach.de/305419