BRANDSON EQUIPMENT 305374 Electric Stick Lighter User Manual
- June 4, 2024
- BRANDSON EQUIPMENT
Table of Contents
BRANDSON EQUIPMENT 305374 Electric Stick Lighter
Thank you for choosing a product from Brandson. To ensure that you enjoy your purchased device for a long time, please read the following user manual carefully.
Scope of delivery
- Electric Stick Lighter
- USB Type-A to microUSB charging cable
Technical data
| Power supply | 5V DC (via USB) |
|---|---|
| Battery | Li-Ion Accu 200 mAh |
| Buttons | 2 |
| Features | • Charging level indicator |
• LED lighting
Ambient temperature| 0°C – 40°C
Safety instructions
Please keep the stick lighter out of the reach of children. Failure to follow the instructions may result in burns.
- Disconnect the device from the mains immediately after it is fully charged. The blue indicator light shows when the device is charging. The device is fully charged and should be disconnected from the power supply. A full charge should take about two hours. If the lighter is not used for a long period of time, it must be charged to the maximum.
- Make sure that the device does not get wet, otherwise a short circuit may occur.
- Do not use the lighter while the device is charging.
- Keep the product away from your face, body and flammable clothing.
- Do not leave the product in direct sunlight for a long period of time.
- Do not use the lighter function continuously for more than 7 seconds as this may affect the life of the product.
- Do not touch the ignition head of the product as there is a risk of high temperatures and/or electric shocks.
- Do not insert any metal objects.
Product details
Safety information
When you press the ignition button, the electric arc is only ignited for 7 seconds and then switched off in order to preserve battery life. The flexible neck allows access to hard-to-reach places and keeps your hands at a safe distance from the igniter.
Charging
No gas or liquid is needed. You can charge the device’s battery with the charging cable provided. To do this, connect the charging cable to a 5V DC power source (e.g. a smartphone charger) and to the microUSB port of the lighter. The product can be connected to any charger with an output voltage of 5V DC and an output current of 1.0 A. A full charge takes about 1.5-2 hours. During the charging process, the blue indicator light flashes. After a complete charge, it can be used approx. 80 to 100 times.
LED torch
Please switch on the device via the “On/Off switch”. Press and hold the “LED button” to switch on the LED light. Press the “LED button” again to switch off the light.
Handling
Switch on the device via the “on/off switch”. Press and hold the “ignition button” to switch on the igniter. Release the button as soon as the ignition has occurred. Switch the unit off via the “On/Off switch”. The LED lighting and the igniter can be used simultaneously.
Safety instructions and disclaimer
Never try to repair or modify the device by yourself. Avoid contact with the mains supply. The device does not carry current only when disconnected. The device is not approved for outdoor use. Therefore, please use it only in dry surroundings. Protect it from high humidity, water and snow. Do not expose the device to high temperatures. Do not expose the device to sudden changes in temperature or strong vibrations, as this could damage the electronic components. Check the de-vice for any damage before using it. The device should not be used if it has been subject to impact or has been damaged in any other way. Please follow the nation-al regulations and restrictions. Do not use the device for purposes other than those described in this manual. This product is not a toy. Keep it out of the reach of children or mentally disabled persons. Any repair or modification to the device, which is not carried out by the original supplier, will void any warranty and guarantee claims. The specifications of the device may be changed without any special prior notification.
Disposal instructions
In line with the European WEEE directive, electrical and electronic devices
should not be disposed of along with the domestic waste. Their components must
be sent separately for recycling or disposal, as improper disposal of toxic
and dangerous components may permanently damage the environment.
According to the electrical and electronic equipment act (ElektroG), you are
obliged (as a consumer) to return (free of charge) electrical and electronic
devices to the manufacturer, the point of sale or public collection points at
the end of their service life. The relevant local laws regulate the details in
this regard. The symbol displayed on the product, in the user manual or/and on
the packaging refers to these regulations. With this manner of sorting,
recycling, and disposal of used devices, you make an important contribution to
protecting our environment.
Instructions on the disposal of batteries
With regard to the sale of batteries or the supply of devices containing
batteries, the supplier is obliged to draw the customer’s attention to the
following:
As the end user, the customer has a statutory obligation to return used
batteries. He can return old batteries stocked or previously stocked by the
supplier in the form of new batteries to the supplier’s despatch warehouse
(despatch address) free of charge. The symbols shown on the batteries have the
following meanings: Pb = battery contains more than 0.004 percent by mass of
lead, Cd = battery con-tains more than 0.002 percent by mass of cadmium, Hg =
battery contains more than 0.0005 percent by mass of quicksilver.
The symbol of the rubbish bin with a cross through it indi-cates that the battery may not be put in household waste
WD Plus GmbH hereby declares that the device 305374 is in compliance with the essential requirements and the other relevant provisions. A complete declaration of conformity is avail-able at: WD Plus GmbH, Wohlenbergstraße 16, 30179 Hanover WD Plus GmbH Wohlenbergstraße 16 · 30179 Hannover Germany
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>