sprout Immerse Bluetooth Speaker User Manual
- June 17, 2024
- Sprout
Table of Contents
sprout Immerse Bluetooth Speaker
WE PUT MORE INTO OUR TECH, SO YOU CAN GET MORE OUT OF LIFE.
At Sprout, our purpose is to help you unlock the potential of your technology.
We’re an Australian brand, and we design all of our products locally to ensure
they are uniquely suited to your lifestyle.
Scan the QR code
to access an online version of this manual
WHAT’S IN THE BOX?
Thank you for choosing the Immerse Bluetooth Speaker by Sprout. For optimum performance and safety, please read the instructions carefully before usage. Please keep this manual for future reference.
- 1x Immerse Bluetooth Speaker
- 1x Australian standard charging adaptor power supply
- 1x Aux-in audio cable
- 1x Product manual
PRODUCT OVERVIEW
- Wireless charging pads
- Bluetooth button
- Power button
- UNISYNCTM button
- LED indicator
- Battery LED indicator
- Voice assistant button
- Volume down button
- Play/pause/answer button
- Volume up button
- Ventilation
- USB-C output
- 3.5mm aux input port
- Charging input
QUICK START GUIDE
CHARGING YOUR IMMERSE
- Connect the speaker via the DC 15V/4.3A charging input to a power source using the included Australian standard power supply
- The LED battery indicator will flash from one to four LEDs to indicate Immerse is charging. A full charge will take about 2-3 hours
CONNECTING VIA 3.5MM AUX CABLE
To play audio using the aux cable, connect the cable from the Immerse to your
device.
Please note: Using 3.5mm aux input will override a Bluetooth source input.
CONNECTING VIA BLUETOOTH
- Press the power button for approximately three seconds. The LED indicator will display as solid blue to indicate power is on
- Press the Bluetooth button once. The LED Indicator will flash red and blue to indicate Immerse is ready for pairing*
- Turn on Bluetooth on your mobile phone/music device**
- Immerse’ will appear on your mobile phone/music device. Select ‘Immerse’ to pair
- Once your mobile phone/music device is paired with Immerse, you will hear ‘Bluetooth connected’***
- Enjoy your music
- If the LED is not flashing red and blue, press the Bluetooth button one more time.
- If you are not familiar with Bluetooth pairing for your mobile phone or music device, refer to the user guide for your mobile phone/music device for instructions to pair a new device using Bluetooth.
- Immerse will always store the last device paired and if the device is within Bluetooth range, Immerse will automatically connect to the device.
OPERATING CONTROLS
POWER
Press the power button for 3 seconds to turn the Immerse on or off.
PLAY/PAUSE/ANSWER
Press the play/pause/answer button to play or pause songs and answer mobile
phone calls.
VOLUME CONTROL
- Short press ‘-’ button to decrease volume.
- Short press ‘+’ button to increase volume.
TRACK CONTROL
- Long press ‘-’ button to select the previous song.
- Long press ‘+’ button to select next song.
BLUETOOTH
- Press the Bluetooth button to turn on/off the Immerse Bluetooth function.
CONNECTING MULTIPLE SPEAKERS VIA UNISYNCTM
If you are using the UNISYNC feature you can connect one Immerse as a primary,
then connect up to 50 UNISYNC devices as replicas. To connect a replica,
short-press the UNISYNC button on your primary device once to enter UNISYNC
mode. Once the primary announces it is in UNISYNC mode, repeat on the replica.
After the replica announces it is in UNISYNC mode, press the UNISYNC button
once more – the replica should now announce it is using UNISYNC audio. The
primary speaker will show a solid blue light while replicas will show a
flashing red and blue light. Press the UNISYNC button again to disable
UNISYNC.
- Press and hold the UNISYNC button for five seconds to reset the UNISYNC function.
- If UNISYNC is disabled, Immerse will disconnect from but remember the replicas connected to it.
- Resetting UNISYNC will enable Immerse to ‘forget’ all replica devices.
WIRELESS CHARGING
The wireless charging pads conveniently recharge your Qi-compatible devices.
LED INDICATOR
Solid blue LED indicates Immerse is switched on.
FLASHING
- Solid blue – Power on
- Flash blue/red – Power off
- Flashing blue/red – Bluetooth pairing mode
- Solid blue – Bluetooth connected
LED BATTERY INDICATOR
The battery LED indicator will flash from one to four LEDs to indicate Immerse is charging. The lights will stop flashing once Immerse is fully charged.
SPECIFICATIONS
- Weight : 1.9kg
- Output power : RMS 40W
- S/N ratio: 85db +/- 3db
- Frequency range : 90Hz – 20kHz
- Power source : 11.1V, 7800mAh lithium battery
- Playtime : 4-5 hours from full charge at 75% volume level
- Charging time : Approximately 2-3 hours
- Function : Bluetooth/ UNISYNC/ Aux-in/Microphone/ USB Type-C power output/ DC input/ Dual 10W wireless charging output
- Bluetooth version : 5.1
- Operating temperature: -10°C to 55°C
IMPORTANT SAFETY INFO
- Immerse Bluetooth Speaker is designed for indoor use
- Do not use Immerse in conditions that expose it to liquid
- Do not put metal objects or magnets between the mobile device and the wireless charging surface
- Ensure all ventilation openings remain clear and dust free
- Do not attempt to charge Immerse when it is wet, or you suspect water has seeped into Immerse
- Do not use Immerse near any open fire, heat source or excessive heat
- Do not open to modify, repair or remove any original component of Immerse. A qualified technician must carry out repair work. Do not remove the built-in battery or the grill cover. Doing so could cause damage to Immerse
- Sound levels should be appropriate to your environment and comply with all local regulations. Ensure that you can hear and are aware of any potential hazards around you when you are enjoying your Immerse
All Sprout products go through thorough quality assurance inspections. If you find that your device is excessively hot, is emitting odour, is deformed, abraded, cut or is experiencing or demonstrating an abnormal phenomenon, immediately stop all product use and contact Sprout.
CONSUMER GUARANTEE
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. If you have any questions about your rights in relation to this product, please return it to point of sale or contact us at enquiries@sproutinc.com.au. This warranty does not affect your legal statutory rights under the Australian Consumer Law. For more information about yourrights under Australia Consumer Law go to www.accc.gov.au. Your Immerse Bluetooth Speaker is warranted to the original owner for 24 months from thedate of purchase against defects in material and workmanship under normal use and service. The warranty does not cover misuse of this product and liability will not exceed the purchase price of the product. If you have any problems while using the product, please do not hesitate to contact our customer support team. For warranty and technical support please visit sproutinc.com.au or email enquiries@sproutinc.com.au. Thank you for choosing a Sprout product.
Frequently Asked Questions (FAQ)
Q: How do I know when the Immerse speaker is fully charged?
A: The LED battery indicator will show all LEDs lit up when the speaker is
fully charged.
Q: Can I use the speaker while it is charging?
A: Yes, you can use the speaker while it is charging, but it may affect the
charging time.
Q: How do I reset the Bluetooth pairing on the Immerse speaker?
A: To reset Bluetooth pairing, press and hold the Bluetooth button for
about 8 seconds until the LED indicator flashes red and blue alternately.
Sprout Accessories Pty Ltd
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>