Brandson 305274 EQUIPMENT COOL Box User Manual
- June 5, 2024
- BRANDSON
Table of Contents
Brandson 305274 EQUIPMENT COOL Box
Safety guidelines for this device
-
To prevent hazards and to comply with safety regulations, repairs to the device and the power cable should only be carried out by our customer service personnel. In case of repair please contact our customer service department by phone or e-mail.
-
Please disconnect the mains plug and allow the device to cool down if necessary before cleaning it.
-
The device should not be treated with liquids or immersed in liquids for electrical safety reasons.
-
The product should not be exposed to rain, direct sunlight and impact.
-
Potentially explosive materials, such as aerosol containers with flammable gas, should not be kept in this device.
-
Food items should be packaged and kept in the cooler box.
-
The device is intended for domestic use and other similar applications like: in the staff kitchen in shops, offices and other similar work areas, in agricultural properties, by customers in hotels, motels and other typical residential facilities as well as in B&Bs.
-
The product is not intended for commercial use, including catering and similar large-scale applications.
-
The device is suitable for use in camping.
-
It is not advisable to use the device daily over several months.
-
The cyclopentane gas used in the insulation should be specifically mentioned during sale, delivery or hand-ing over for recyling.
-
The device can be operated by children from 8 years of age and above, as well as by people with reduced physical, sensory or mental capacities and/or who lack knowledge or experience, if they have been supervised or instructed regarding safe use of the device, and have understood the resultant dangers.
-
Children should not play with the device.
-
Cleaning and user maintenance should not be performed by children without supervision.
-
Caution! Keep children away from the packaging material. There is risk of suffocation.
-
Never block the fans of the device.
-
Never place any objects on the device to ensure adequate air circulation and to ensure that the ventilation slots are not covered.
-
Operate the lid only along with the associated container!
-
Do not allow any liquids to enter the fan openings or into the cooler box.
-
Neither the device nor the power cables should be exposed to external heat.
-
Two or more power cables should not be connected simultaneously.
-
Please check the complete device including the power cable and any accessories before use for defects and damage that could affect the functionality of the device.
For example, if the device has fallen down or has been pulled using the power cable, there may be damages which are not visible from the outside. Do not use the device any more in such cases. -
Disconnect the mains plug each time after use, in case of malfunctions during use and/or before cleaning.
-
Please do not disconnect the mains plug from the socket by pulling the power cable but always grip the mains plug.
-
If the device is operated incorrectly or misused, we do not accept liability for any resulting damage.
-
Coolers are classified into climate cat-egories. Please refer to the product data sheet which is given at the end of this manual for the climate catego-ry of this device.
-
The ambient temperature at which the device can be operated is specified in the product data sheet given at the end of this manual.
-
The cooler box uses thermoelec-tric technology and can be used for cooling as well as for keeping items warm.
-
Make sure that the power cable is al-ways connected correctly and firmly. A loose connection can cause the ca-ble and socket to heat up and result in damage or even a fire.
-
Do not change the “Cooling/ Heating” modes abruptly. Allow the device to cool for at least 30 minutes before changing the mode.
Thank you for choosing a Brandson product. Please read the following user manu-al carefully so as to get the most from the product you have purchased.
Scope of delivery
- Cooler box with fixed cables for the 12V vehicle on-board electri-cal system connection or for 220-240V mains voltage
Technical data
Power supply| • 100-240 V AC (via AC power cable)
• DC12V (via DC power cable; vehicle port)
---|---
Capacity| about 24 L
Maximum cooling / heating capacity
| • Cooling: up to approximately 10-18 °C below the ambient temperature
• Heating: up to approximately 50 ±5°C
Buttons
| 2 switches:
• Switch 1: COLD / OFF / HOT
• Switch 2: ECO / OFF / MAX
Permissible ambient temperature| 10-32 °C
Caution! The heating and cooling performance will depend on the strength of the power source and the ambient temperature.
Product details
Before initial use
Take the device out of the package and remove all the packaging material. Clean the device as described in “Cleaning and care” before using it for the first time.
Initial use
irst make sure that the device is switched off (both switches in the middle
(OFF) position), and then insert the plug of the power cable into the
appropriate power supply socket.
Make sure that you connect the cooler box either to 12V DC (using the
cigarette lighter power cable provided) or to 100V-220V (using the
conventional power cable). Do not use any voltage that does not match the
specification on the typeplate.
Caution! Ensure that you do not connect both the power cables
simultaneously! Use the device only with a power supply!
-
1. Operation
To start the device, move the “COLD / OFF / HOT” and “ECO / OFF / MAX” switch- es to the desired position.
You can select the device mode using the “COLD / OFF / HOT” switch. Select
“COLD” (Green status LED) for cooling and “HOT” (Red status LED) for heating. You can switch off the device by moving the switch to the centre “OFF” position.You can select the device power using the “ECO / OFF / MAX” switch. Select
“ECO” if you want less intense, but more power efficient cooling / heating. Select “MAX” if you want maximum heating / cooling performance. You can switch off the device by moving the switch to the centre “OFF” position.
Note: The recommended waiting time for cooling is 2 hours and for heating 30 minutes.
Cleaning and Care
Disconnect the plug and allow the device to cool down completely before clean-
ing. The device should not be treated with liquids or even immersed in liquids
for electrical safety reasons.
Never use harsh or abrasive cleaning agents. Wipe the cover with a damp cloth
and then dry it completely. The container may be cleaned with a damp cloth and
with some mild cleaning agent if necessary.
Allow the cooler box to dry completely before using it again.
Safety instructions and disclaimer
Never try to open the device to repair or make modifications. Avoid contact
with the mains voltage. Do not short-circuit the product. The device is not
approved for outdoor use. Therefore please use it only in dry surroundings.
Protect it from high humidity, water and snow. Keep the device away from high
temperatures. Do not expose the device to sudden changes in temperature or
strong vibrations, as this could damage the electronic components.
Check the device for any damage before using it. The device should not be used
if it was subject to impact or has been damaged in some other manner. Please
com-ply with the local regulations and restrictions. Do not use the device for
purposes other than those described in the user manual. This product is not a
toy. Keep it out of the reach of children or mentally disabled persons. Any
repair or modification to the device, which is not carried out by the original
supplier, will void any warranty and guarantee claims. The device should be
used only by persons who have read and understood this user manual. The
specifications of the device may be changed without any special prior
notification.
Disposal instructions
In line with the European WEEE directive, electrical and electronic devices
should not be disposed of along with domestic waste. Their components have to
be sent separately for recycling or disposal, as improper disposal of toxic
and dangerous components may permanently damage the environment.
According to the electrical and electronic equipment act (ElektroG), you are
obliged (as a consumer) to return (free of charge) electrical and electronic
devices to the manufacturer, the point of sale or public collection points at
the end of their service life. The relevant local laws regulate the details in
this regard. The symbol displayed on the product, in the user manual or/and on
the packaging refers to these regulations. With this manner of sorting,
recycling and disposal of used de-vices, you make an important contribution
towards protecting our environment.
WEEE directive: 2012/19/EU WEEE Register no.: DE 67896761
The company WD Plus GmbH hereby certifies that the device 305274/20201026NB167
com-plies with the fundamental requirements and all other relevant
stipulations. A complete conformity statement can be obtained from: WD Plus
GmbH, Wohlenbergstraße 16, 30179 Hannover
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>