Erbauer BX220IM-B3 Self Levelling Cross Line Laser Level Instructions

Erbauer BX220IM-B3 Self Levelling Cross Line Laser Level

Product Information

Specifications

• Model: Erbauer 20m Cross Line Laser (Red Beam)
• Vertical & Horizontal Beam
• 1x Clamp included
• Laser Class: XX
• Laser Wavelength: XX nm
• Max Laser Output: XX mW
• Power Source: XX
• Operating Time (All lasers ON): XX hours
• Dust and Water Resistance: Yes
• Operating Temperature Range: XX°C to XX°C
• Storage Temperature Range: XX°C to XX°C
• Tripod Mount: Yes
• Dimensions (LxWxH): XX mm x XX mm x XX mm
• Weight (without batteries): XX g

FAQ

• Q: What should I do if the laser beams are not easily visible?
  • A: Try moving the tool closer to be within the nominal operating range.
• Q: How do I replace the batteries?
  • A: Lift the battery compartment cover and insert four new AA batteries, following the correct polarity.
• Q: Can I mount the Erbauer 20m Cross Line Laser on a tripod?
  • A: Yes, you can mount it on a tripod with an M6 mount (sold separately).

Product Usage Instructions

Safety Instructions

IMPORTANT: Please read this instruction manual carefully before using the product and familiarize yourself with the operation, adjustments, and functions of the various switches.

WARNING:  Danger of permanent eye injury!

Functions and Settings

To use the Erbauer 20m Cross Line Laser, follow these steps:

1. Place the laser on a solid, flat, and vibration-free surface.
2. Set the pendulum movement lock button to the manual mode.
3. For manual mode, the laser will blink every 3 seconds.

Maintenance

If you encounter any issues with the Erbauer 20m Cross Line Laser, refer to the following table for possible solutions:

Laser beams are not easily visible within the operating
range| Move the tool closer to be within the nominal operating
range
The laser does not turn on| Check if the pendulum movement lock button is set to manual
mode and try placing it on a different surface

Battery Replacement

To replace the batteries in the Erbauer 20m Cross Line Laser:

1. Lift the battery compartment cover.
2. Insert four new AA batteries into the compartment, following the correct polarity.

Mounting Options

The Erbauer 20m Cross Line Laser can be mounted using the following options:

1. Mount on a tripod (sold separately). The tripod mount is M6.
2. Attach the magnetic clamp or rear multifunction clamp.

Information

PROCESS BLACK

| Erbauer 20m Cross Line Laser (Red Beam) Verticle & Horizontal Beam + 1xClamp| Vendor: Greatstar

No. of New Line Drawings: 0 Page Size: A6 / No. of Pages:

| VERSION #
| 1| 2| 3| 4| 5
| 06/05/22

Mohit

| 26/05/22

Mohit

| 08/06/22

Mohit

| 29/06/22

Sonia

| XX/XX/21 XXX
This file is the property of Kingfisher Group Plc. No copying, alteration or amendment is permitted without written authorisation from the Kingfisher Brand Team.

Parts

Safety

IMPORTANT: Please read this instruction manual carefully before using the product, and familiarise yourself with the operation, adjustments, and functions of the various switches.

• Consider and follow the safety and operating instructions in order to avoid possible risks and hazards.
• Keep these instructions for future use. If the product is passed onto a third party then these instructions must be included.

WARNING:  Danger of permanent eye injury!

• Laser Radiation!
• Do not stare into the beam.
• Class II laser product

WARNING

• DO NOT operate the tool around children or pets, this product is not a toy and is not intended for use by children.
• DO NOT remove or destroy any label appearing on this instrument.
• DO NOT stare directly at the laser beam, as this can cause blindness. Only turn the laser ON when being used.
• DO NOT place the tool in a position that may cause anyone to stare at the laser beam, whether intentionally or unintentionally, and ensure bystanders are aware of the dangers.
• DO NOT point the laser beam emitted by the instrument at people or animals.
• DO NOT point the laser onto shiny or reflective surfaces such as glass or polished metals, as this could reflect the beam back at the operator or passes by.
• DO NOT attempt to modify the performance of this laser device in any way. This may result in a dangerous exposure to laser radiation.
• DO NOT attempt to repair or disassemble the laser measuring tool. Any repair required on this laser product should be performed only by qualified service personnel.
• Only use accessories that have been designed for use with this laser. The use of accessories designed for other laser products could result in serious injury.
• DO NOT place or store the product in extreme temperatures.
• DO NOT operate the tool in explosive environments, such as in the presence of flammable gasses or dusts. Any sparks created by the tool could ignite the dust or fumes.
• Keep the tool away from cardiac pacemakers. The magnet inside the tool generates a magnetic field that can impair the function of cardiac pacemakers.
• Keep the tool away from magnetic data storage media and magnetically sensitive equipment. The effect of the magnet could lead to permanent data loss.
• Measurements may not be accurate if used beyond the rated range of the device.
• The use of optical instruments with this product will increase eye hazard.
• Always make sure any bystanders nearby are aware of the dangers of looking directly into the measuring tool.
• DO NOT use laser viewing glasses as safety goggles. They make seeing the laser easier, they do not protect you against laser radiation or any form of impact.
• ALWAYS remove the batteries when cleaning the laser light apertures.
• ALWAYS select the correct size and grade of battery most suitable for the intended use. Information provided with the equipment to assist correct battery selection should be retained for reference.
• Replace all batteries of a set at the same time.
• Ensure that the batteries are installed correctly with regard to polarity (+ and –).
• Remove batteries from equipment which is not to be used for an extended period of time.
• Remove exhausted batteries promptly.

Technical data

Functions| Horizontal ( 360° rotating laser plane) Vertical line

Cross lines (1x 360°horizontal and 2 x vertical lines)

---|---
Working distance(Line)| 20m*
Self-Leveling Range| ± 4°
Accuracy| 0.3mm/m
Horizontal Divergence Angle| 360°
Laser Class| Class 2
Laser Wavelength| 635±10nm
Max Laser Output| <1mW
Power Source| 4 x “AA” (alkaline battery)
Operating Time (All lasers ON)| 8 hours with Alkaline batteries
Dust and Water resistance| IP54
Operating Temperature Range| -10°C ~ 40°C
Storage Temperature Range| -20°C ~ 60°C
Tripod mount| M6
Dimension (LxWxH)| 88 x 69 x 118 mm
Weight (without batteries)| 395 g

Important: The accuracy is rated within distance of 10 meters. Under unfavorable conditions, such as in extreme interior illumination, transparent surfaces (e.g. glass, water), porous surfaces (e.g. insulation materials) or reflecting surfaces (e.g. Polished metal, glass) or very rough surfaces (e.g. rough cast, natural stone), the tool’s measuring range and accuracy will be decreased.

Intended use

• This product is intended to be used to project laser lines to aid professional users in various applications. It has been designed primarily for indoor use and can project vertical and horizontal beams. Example applications include installations such as kitchens, doors, windows, ceilings, stairs etc or tasks such as hanging wallpaper, installing shelves etc.
• It is not recommended to use the product in wet conditions or in the presence of flammable liquids or gas.
• It should be kept out of reach of children and animals. Supervision is required when the product is being used by inexperienced users.

Disposal

CAUTION: The batteries must not be disposed with household waste. Care for the environment and take them to the collection points provided in accordance with national or local regulations. Dispose of the product appropriately in accordance with the national regulations in force in your country. Adhere to the national and country specific regulations. Product specific treatment and waste management can be downloaded from our homepage.

Guarantee

We take special care to select high quality materials and use manufacturing techniques that allow us to create products incorporating design and durability. This product Erbauer Laser has a manufacturer’s guarantee of 5 years against manufacturing defects, from the date of purchase (if bought in store) or date of delivery (if bought online), at no additional cost.

To make a claim under this guarantee, you must present your proof of purchase (such as a sales receipt, purchase invoice or other evidence admissible under applicable law), please keep your proof of purchase in a safe place. For this guarantee to apply, the product you purchased must be new, it will not apply to second hand or display products. Unless stated otherwise by applicable law. This guarantee covers product failures and malfunctions provided the product was used for the purpose for which it is intended and subject to installation, cleaning, care and maintenance in accordance with the information contained in these terms and conditions, in the user manual and standard practice, provided that standard practice does not conflict with the user manual.

This guarantee does not cover defects and damage caused by normal wear and tear or damage that could be the result of improper use, faulty installation or assembly, neglect, accident, misuse, or modification of the product. Unless stated otherwise by applicable law, this guarantee will not cover, in any case, ancillary costs (shipping, movement, costs of uninstalling and reinstalling, labour etc), or direct and indirect damage.

This guarantee does not include consumable parts such as batteries, clamps/accessories and does not cover the accuracy of the unit. If the product is defective, we will, within a reasonable time, replace/refund the product. Rights under this guarantee are enforceable in the country in which you purchased this product. Guarantee related queries should be addressed to the store you purchased this product from. The guarantee is in addition to and does not affect your statutory rights.

Functions & Settings

1. Laser beam outlet apertures
2. Power on/off and laser plane selection button.
3. Laser line modes
   • Horizontal 360° laser beam
   • Vertical beam
   • Cross beams, includes one horizontal and two vertical beams
4. Battery capacity indicator
   • Solid GREEN- High battery power
   • Blinking RED- Low battery power, batteries need replacing soon
5. Pendulum lock switch
6. Battery compartment cover
7. M6 Thread mount
8. Warning label location

Battery replacement

To install batteries:

1. Lift up the battery compartment cover.
2. Insert four fresh AA batteries in the compartment, placing the batteries according to (+) and (–) on the inside of the compartment.
3. Close battery compartment cover.

WARNING: Batteries can explode, or leak and can cause injury or fire. To reduce this risk carefully follows all the following precautions:

• Carefully follow all instructions and warnings on the battery instructions
• Always turn off the instrument before replacing batteries
• Always use batteries of the same brand, type and age
• Make sure batteries are installed in the correct polarity (+ and –), marked on the battery and the equipment
• Do not short battery terminals
• Do not charge disposable batteries
• Remove dead batteries immediately and dispose of per local requirements
• Do not dispose of batteries in fire
• Keep batteries out of reach of children
• Please take out the batteries when the device is not in use, as batteries might corrode and discharge themselves

Low battery indication

Battery capacity indicator

• Solid GREEN = High battery power
• Blinking RED = Low battery power

Mounting options

1. Use the magnetic wall mount to fix the laser to a wall or metallic structures or similar. Turn the laser 360° with fine adjustment.
2. Use Tripod (not included), Tripod mount is M6.
3. Use the magnetic wall clamp attached to the multi function back clip.

Operating Instructions

Magnetic clamp

Tripod

Multi function back clamp

Turning the laser ON/OFF

1. Place the cross laser on a solid flat vibration free surface.
2. Turn on laser: Press on/off button to turn on the laser tool.
3. Turn off laser: Press on/off button for ≥ 5 seconds.

WARNING

• Avoid direct eye exposure. When turning on the tool, do not stare into the laser beam or direct it towards any people.

Self-leveling mode

Under self-levelling mode the laser tool will level itself in a ± 4° range and could project a horizontal 360° rotating laser beam, a vertical beam or cross beams simultaneously including one horizontal and two vertical beams.

1. Place the laser on a solid, flat, level, vibration free surface.
2. Move the pendulum lock to the UNLOCKED position. The laser will self-level within 4 seconds.
3. Push the on/off button the appropriate number of times to choose the beams that you want to work with.
   • x1 One horizontal 360° rotating laser beam
   • x2 One horizontal 360° rotating laser beam and one vertical laser beam
   • x3 Cross beams simultaneously include one horizontal and two vertical beams.

NOTE

• If the initial level of the cross laser is beyond ±4° and the self-levelling mode is activated, the laser beams will flash.
• In this case, please reposition the laser onto a level surface.

Manual mode

Under manual mode, the cross lasers self-levelling mechanism is disabled and the laser lines can be set at any angle required.

1. Place the laser on a solid, flat, level, vibration free surface.
2. Move the pendulum lock to the LOCKED position
3. Push the on/off button the appropriate number of times to choose the beams that you want to work with.
   • x1 One horizontal 360° rotating laser beam
   • x2 One horizontal 360° rotating laser beam and one vertical laser beam
   • x3 Cross beams simultaneously include one horizontal and two vertical beams.
4. Position the laser and adjust to the required angle and height.

***** The laser will blink every 3s in manual mode.

Maintenance

This laser measuring tool is designed to be a low-maintenance tool. In order to maintain its performance, you must always follow these simple directions:

• Avoid exposing the tool to shock, continuous vibration or extreme hot or cold environments.
• Always store the tool indoors.
• Always keep the tool free of dust and liquids. Use only a clean soft cloth for cleaning. If necessary, slightly moisten the cloth with pure alcohol or a little water.
• Do not disassemble the laser measuring tool; this will expose the user to hazardous radiation exposure.
• Do not attempt to change any part of the laser lens.
• We recommend getting the laser level calibrated every 12 months by a recognised calibration house

Troubleshooting

Move the tool closer to be within the rated operating range
The laser does not turn on| No batteries installed or batteries are depleted.| Make sure AA batteries are installed correctly according to (+) and (–) on the inside of the compartment. Or replace with new batteries.
Laser line flashing| ****

The tilt range has been exceeded or the tool is working under manual mode

| The laser tool has been designed to  self-level up to an average of ± 4°.

Please try repositioning the laser on a more level surface if it is working under self-levelling mode. If the tool is in manual mode but self levelling required unlock the pendulum.

Manufacturer

UK Manufacturer

• Kingfisher International Products Limited,
• 3 Sheldon Square, London, W2 6PX United Kingdom

EU Manufacturer

• Kingfisher International
• Products B.V.
• Rapenburgerstraat 175E 1011 VM Amsterdam
• The Netherlands
• www.kingfisher.com/products
• www.diy.com
• www.screwfix.com
• www.screwfix.ie

To view instruction manuals online, visit www.kingfisher.com/products

Artwork done by Impala Services Ltd

• Info@impala-tach.com

References

• The Auto Channel “ Stuffed with Food for Thought, Question Provoking New and Used Car Reviews, Opinions And Other Automotive and Alt Fuel Content - Disrupting Since 1996
• Brico Depôt | Bricolaje, jardín, construcción y climatización
• Brico Depôt | Bricolage, construção, jardim e climatização
• Bricolage, jardinage et aménagement de la maison | Castorama
• B&Q | DIY Products at Everyday Low Prices | DIY at B&Q
• KoçtaÅŸ | Evimi Çok Seviyorum

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>