luminii LLDW73STP LineLED DW73STP Wet Location Linear LED Strip Instruction Manual
- June 6, 2024
- luminii
Table of Contents
luminii LLDW73STP LineLED DW73STP Wet Location Linear LED Strip
Installation Instructions
Please read all instructions prior to installation and keep for future reference!
- Product should be installed by a qualified electrician.
- Prior to installation ensure power is off at fuse box to prevent electrical shock.
- Use only with Class 2 power unit. Utiliser seulement avec Classe 2 unite d’alimentation electrique.
- Suitable for Damp Locations. Convient Aux Emplacements Humides.
- For under-cabinet or shelf mount.
- Conforms to UL STD 2108. Certified to CSA STD C22.2 No.250.0.
Attention:
Always test LineLED operation before installing. Connect LineLED to power
supply to ensure it is working properly and no damage has occurred during
shipping.
Operations to controller
- Press the learning key on the receiver, then push the rotary button. Once successfully learn, the LED lights will blink on the receiver. Do the same for the other receivers if you use them, you can add as many optional receivers as you want.
- Short press once the rotary button to switch on/off. Adjust dim brightness by the rotary button from left to right 0.1 – 100%. Adjust dim brightness by the rotary button from right to left 0.1 – 100%. Long press rotary button, the light will be 100% brightness. Double click rotary button, it will enter into dimming color temperature mode, dim WW & CW associatively, for example if WW is 70%, CW is 30%. Double click again, will enter into dimming brightness mode.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>