ESR 2C515 HaloLock Kickstand Wireless Charger User Manual
- June 6, 2024
- ESR
Table of Contents
ESR 2C515 HaloLock Kickstand Wireless Charger
Before using this product, please read this manual carefully. Keep this manual for future reference.
Product Overview
Important Reminders
- For maximum charging speed, use a cable and adapter compatible with QC (Quick Charge) 2.0/3.0 or PD (Power Delivery)fast charging.
- This charger will only attach to a caseless iPhone 12/12 Pro/12 mini/12 Pro Max, official Mag Safe cases, and ESR Halolock cases. rt will not attach to any other phones or cases.
- The maximum output of this charger is 1 SW. Its maximum output for iPhones is 7. 5W.
Setup Instructions
This charger is equipped with a Hallock magnetic ring. It will automatically
align your iPhone 12 with the charger for easier wireless charging. 
- Adjust the kickstand to a comfortable angle. Do not push the stand past 60°.
- Plugin the charger. Attach the charger to the phone to begin charging.
Safety Warnings
- Do not attempt to disassemble the device, expose it to an open flame, or submerge it in water to avoid damaging the device.
- Always check for damage to the device, cables, or other accessories before using the device. If damaged, do not use the device.
- . Do not expose the device to extremely hot, humid, or corrosive environments to avoid damaging the device.
- Do not expose the device to corrosive liquids, as they will seriously damage the device and void the warranty.
- Do not attempt to disassemble or modify the device in any way, as it may cause serious damage and void the warranty.
- Do not place the device in temperatures below 0°C (32°F) or above 60°C (140°F).
FCC ID
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1 )This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Warning : Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules: These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20cm between the radiator &your body.
IC
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.”