ACCORD Physalis Ceiling Mounted 5093 Instruction Manual
- June 8, 2024
- ACCORD
Table of Contents
Physalis Ceiling Mounted 5093
Instruction Manual
Physalis Ceiling Mounted 5093
ASSEMBLY INSTRUCTIONS
WARNING!
Be sure electrical power is OFF before and during installation or maintenance.
The luminaire must be installed by a qualified electrician, in accordance with
all applicable local codes.
Ensure that the rated luminaire voltage requirements are compatible with the
available mains supply in which it will be installed.
All LEDS are included in your lamp. Never touch the LED surface with your bear
hands as this may reduce the life of your LED.
Do not alter, relocate or remove any electrical component.
Natural Wood Veneer MDF and Acrylic
Line: Physalis
Family: Plafon
Description: Physalis Accord Ceiling Mounted 5093
Material: Natural Wood Veneer MDF and Acrylic
Weight: Turn OFF the power before start the installation.
MAKING ELECTRICAL CONNECTIONS
- Pass the power supply cable through the off-center hole on the base and metal canopy.
- Connect the electrical supply wires to the junction box in accordance to all aplicable local codes, as shown in the diagram.
MOUNTING ON THE FIXTURE
- Attach the support base and metal canopy to the junction box using the supplied screws.
- After electrical connections are made, place excess wire inside of the junction box.
- Raise the shade so that the three gaps are above the tabs of the support base. Rotate and lower the shade so that it rests on the installed base.
- Once the luminaire is suspended,install the lamp (not included) in socket E-26 fixed on the nozzle base.
Turn ON electrical power.
Your luminaire is now ready for use.
ATENTION!
FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY CAUSE ACCIDENTS AND LOSS OF
PRODUCT WARRANTY.
Its recommended to read these instructions completely and carefully before
proceeding.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
ACCORD Lighting guarantees coverage against manufacturing defects including
electrical components and finishes, for a period of three years, under normal
use, from the date of purchase. For warranty service, please contact your
local dealer for further instructions. Proof of date of purchase will be
required for validation of warranty service.
The responsability of the manufacturer regarding the product warranty is
related to the correct observation of the instructions contained in this
manual.
The manufacturer is not responsible for any damage to the product caused by
accidents, alterations of any kind, improper usage or improper installation.
See the website for additional warranty details.
ACCORD Lighting reserves the right to change the dimensions and specifications
contained in this manual without prior notice, in accordance with its policy
of continuous product improvement. Please, contact the manufacturer if
additional information is necessary. The illustrations in this manual are for
guidance only and may vary in scale, dimensions and model details.