TELE System SMART22 LX FHD 22 Inch Full HD TV Instructions

: June 5, 2024
: TELE System

Table of Contents

Inputs and Outputs
Remote controller
First installation
Main functions
Product description
- Connections
Advanced functions
Technical specifications
Simplified EU conformity declaration
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

TELE System SMART22 LX FHD 22 Inch Full HD TV Instructions

Inputs and Outputs

YPbPr in (mini): audio-video input for connecting YPbPr devices.
AV in (mini): audio-video input for connecting CVBS + Audio devices.
CI / CI +: slot for CI / CI + type Common Interface modules.
USB 2.0 (x2): USB2.0 ports for media player function.
RF IN (T2 / C): antenna input (IEC) for digital terrestrial (DVB-T / T2) or cable (DVB-C).
RF IN (S2): SATELLITE RF antenna input (type F).
HDMI1, HDMI2 (v.1.4) for connecting an AV source.
COAXIAL: coaxial digital audio output.
Headphone Output: 3.5mm jack.
LAN: Ethernet port (RJ45) required for the SmartTV function.
220V AC power supply
12V DC power supply

Remote controller

Insert 2 AAA batteries (not supplied) into the remote control compartment respecting the correct ones polarity. Exhausted batteries should be disposed of separately from household waste taking them to any point of sale or collection.

WARNINGS In case of prolonged non-use, remove the batteries to prevent them from leaking corrosive damage the remote control. Do not use different batteries or dead, new batteries at the same time.

First installation

Connect the antenna cable (terrestrial and / or satellite) and the ethernet cable (if available).
After turning on the TV, perform the first installation as per the wizard, use the arrow keys and OK for selection and confirmation:

Step 1,2,3,4. Choice of language / country / password * /Time zone;
Step 5. Connection to the network (wired or wireless);
- a. Cable: the connection to the network is established without any kind of intervention;
- b. Wireless: select the item Use WiFi network, then choose the WiFi network to which you want to connect the TV and enter the password (press OK for call up virtual keyboard), confirm by selecting Connect;
Step 6. “E-Share” APP, use the QR Code to download and install the app **;
Step 7. Choice of boot mode / source;

ATTENTION!

The system does not accept the value “0000” as a password.
The E-Share app must be installed on the mobile device (e.g. smartphone) in order to work correctly, the mobile device and the Smart TV must be connected to the same network. The application does not completely replace the traditional remote control, it is realized mainly to use the Smart features of the TV (applications, media player, etc…). Some applications require the use of a keyboard and / or a cursor / mouse; then the traditional remote control supplied with the TV is not sufficient to control them

Main functions

TV mode Channel search:

Access the Channel menu;
Select the source from the Antenna Type item (Terrestrial, Cable or Satellite);
Select the Scan item;
Define the search parameters according to the antenna system and / or preferences;
Start the scan

NOTE By choosing to use the LCN (terrestrial) or TivùSat (satellite) function, at the end of the search a channel list will be created with a predefined sort order. Viewing encrypted channels requires the use of a conditional access module dedicated (CAM) and relative card (Smart-card), to be purchased separately.

Channel selection: At the end of the scan, a channel list will be created for each source, the channel lists they will be available individually after selecting the source, for example:

Terrestrial Channels: access the Channel / Antenna Type menu and set Terrestrial
Satellite Channels: access the Channel / Antenna Type menu and set Satellite

Smart (Home) mode

The Home menu, which can also be accessed directly from the HOME button on the remote control, allows to access the following features:

Management and use of applications;
Browsing browser,
Selection of input sources / modes:
Access to the application store for download and installation.
Access to the Multimedia menu for playing audio / video content from external USB memory devices or for managing the files saved in the internal memory of the TV, such as installation from APK file (recommended procedure for expert users only).
Access to system settings

System Settings
Accessible from the Home menu, it allows you to configure:

Network settings (connection to the network via LAN cable or Wireless);
Time setting for setting the time and related parameters;
Common settings, for general changes such as language, keyboard type, management permissions / accounts;
Info, to get information about the system (HW / SW version, MAC address, memory, GPU …).

WARNINGS To take advantage of the SMART TV features, you need to connect the TV to the internet.

Antenna system configuration (satellite)

The default settings provide for the configuration of a fixed antenna system with single LNB, receiving the signal from the Hotbird 13 ° E satellite. In the case of a different antenna system, it is necessary to change the configuration, changing the parameters in the Channels / Scan / LNB menu.

NOTES AND WARNINGS

The TV is compatible with single universal converter, multi-satellite systems DiSEqC (1.0 – 1.1 – 1.2 – 1.3) and multi-user SCR / Unicable. Incorrect antenna configuration may result in the failure of some or all channels. we recommend that you contact a professional installer for installation. The signal level and quality indicators refer to the transponder of the selected satellite indicated on the screen. So make sure that it is valid / up-to-date and really active. It is not recommended to avoid connecting the TV to the satellite signal via the connector through antenna (LNB Out / Loop Through) of an external satellite receiver as both devices cannot work at the same time. In case of system with LNB SCR: each television / receiver connected to the same system must use a different SCR Channel.

Do not use when connecting several receiving devices to an SCR system any antenna connection (loop through) of a satellite receiver external signal, but use a dedicated external signal divider.

Restore factory settings (reset)

Returns all settings to their initial condition. Accessible from Home menu> Settings> Common> System Reset

WARNING

Restoring the factory settings deletes all customizations made by the user, including stored channels, downloaded applications and settings modified. Also, by confirming the reset, the TV will perform a complete restart of the system, then the first installation wizard will be displayed on the screen.

Product description

Connections

The following inputs and outputs are available behind the TV:

YPbPr in (mini): analogue audio-video input for connecting an AV device with a YPbPr interface.
AV/in (mini): analogue audio-video input for connecting an AV device with a CVBS+ Stereo interface.
CI/CI+: housing for CI/CI + common interface modules.
USB (x2): USB2.0 ports for connecting USB mass storage devices for multimedia playback (Media player function).
RF IN (T2/C): antenna input (IEC type) for receiving digital terrestrial (DVB-T / T2) or cable (DVB-C) signal.
RF IN (S2): SATELLITE RF Antenna input (type F).
HDMI1, HDMI2: HDMI digital audio-video inputs (v.1.4) for connecting an external AV source (e.g. a receiver or DVD player) equipped with an HDMI interface.
COAXIAL: coaxial digital audio output.
Headphone: headphone output (3,5mm jack).
LAN: Ethernet (RJ45) port for connection to the Internet, necessary for the Smart TV function.
Supply: 220V AC and 12V DC (external)

Remote Control

Place 2 AAA batteries (not supplied) in the remote control compartment respecting the correct polarities. Exhausted batteries must be disposed of separately from household waste and bring to any point of sale or collection.

WARNINGS
To prevent corrosive liquid leakage from damaging the remote control, it is advisable to remove the batteries if you believe you will not use the device for a long time.
Avoid using different types of batteries such as new and used batteries at the same time.

Advanced functions

Antenna system configuration (Sat)

The default settings include the configuration of a single LNB fixed antenna system, receiving the signal from the Hotbird 13-E satellite.
In the case of different antenna system, you need to change the configuration, modifing the parameters in the Channels/Scan menu.

Technical specifications

Panel

| Format| 21,5” – 16:9 wide (55 cm)
---|---|---
Resolution| 1920 x 1080 (Full HD)
Contrast| 3000:1
Brightness| 180 (cd/m2)
Viewing angle| 178°/178° (Horizontal/Vertical)

Inputs

| HDMI| x2 – HDMI
A/V in| Mini jack x1 – YPbPr

Mini jack x 1 – AV in (CVBS+Audio)

USB| x2 – USBv2.0, filesystem FAT32e NTFS, Mediaplayer
Audio output| x1 – COAXIAL / x1 – Earphone (3,5mm jack)
LAN| x1 – RJ45, Ethernet 10/100

TV Signals

General

dimension s

Simplified EU conformity declaration

The manufacturer, TELE System Digital s.r.l.., states that the radio equipment type of SMART TV named SMART22 LX FHD complies with the 2014/53/EU directive.

The full text of the EU compliance declaration is available at the following Internet address:
https://www.telesystem.it/CE

28000197 SMART22 LX FHD

For detailed information, please visit the TELE System Digital Srl website

Covered by one or more claims of the patents listed at patentlist.hevcadvance.com

TELE System Digital Srl
Website: www.telesystem-world.com