pureit B08PBPVJZP Eco Water Saver Instruction Manual

June 6, 2024
pureit

pureit B08PBPVJZP Eco Water Saver

KNOW YOUR PURSUIT ECO WATER SAVER MINERAL RO+UV+MF PURIFIER

pureit-
B08PBPVJZP-Eco-Water-Saver-FIG-1

  1.  Cleaning Solution Dispenser
  2.  Storage Tank Indicator
  3.  Pre Sediment Filter Indicator
  4.  GKK Life Indicator
  5.  Helpline Indicator
  6.  Tap
  7.  Sediment Filter Assembly
  8.  Inlet Water Tube
  9.  Ball Valve
  10.  Waste Water Tube.

UNIQUE FEATURES OF PUREIT ECO WATER SAVER MINERAL RO+UV+MF PURIFIER

Advanced 7 stage purification process with RO+UV+MF
Every drop of water you drink is sweet and always safe.

100% RO purified water
All water passes through RO ensuring no mixing of purified and impure water. Only RO can remove harmful chemicals like Lead, Mercury etc.

Includes mineral cartridge
Enriches water by adding essential minerals like Calcium and Magnesium.

Large storage capacity of 10 liters
You will never run out of purified water.

With Eco Recovery™ Technology

*High water saving up to 60% recovery**
Saves significant water when ordinary ROs save only 25%.

Double Purity Lock:
Advance Alert warns you 15 days before filter expiry and Auto Shut Off stops water if the filter is not changed.
100% guarantee of safe and sweet water.

**Hi-speed purification of up to 24 liters/hour***
(Highest among leading ROs^)

Purifies water required for the entire day in less than 1 hour.**
United States Environment Protection Agency (USEPA) compliant Meets the toughest safety standards by removing 1 Cr virus and 10 Cr bacteria from 1L water.

PUREIT ECO WATER SAVER MINERAL RO+UV+MF PURIFIER’S ADVANCED PURIFICATION

PROCESSpureit-B08PBPVJZP-Eco-Water-Saver-FIG-2

This is a graphic representation of filters

  1. Pre-Sediment Filter (SF)
    Removes fine and coarse particulate impurities/ dirt and improves the life of the Carbon Filter.

  2. Pre-RO Carbon Filter
    Removes chlorine and organic impurities such as harmful pesticides. It also absorbs bad taste and odor-causing organic compounds from water.

  3. Mesh Filter
    Filters water further to ensure the removal of finer particulate impurities.

  4. RO Membrane
    Removes dissolved salts, hardness, pesticides, and heavy metals like arsenic, lead, and mercury. It also removes microbial contaminants like bacteria, viruses, protozoa and cysts.

  5. UV Chamber
    Acts as an additional stage of purification to further inactivate bacteria, viruses and parasites to deliver safe water.

  6. Post RO Carbon Filter
    This level of purification acts as a polisher and enhances the taste of purified water.

  7. Micro-Filtration (MF) Membrane
    Micro-Filtration Membrane is the stage after Post-RO and UV, which ensures that the water is purified not once but thrice.

INSTALLING YOUR PUREIT ECO WATER SAVER MINERAL RO+UV+MF PURIFIER

  1.  The purifier should be installed by a trained Pureit technician.
  2.  It can be wall-mounted or used as a tabletop purifier.
  3.  The purifier should be placed in an area which is free of ants/insects/other pests.
  4.  The purifier should be placed close to the plumbed inlet connection (not more than 2 meters).
  5.  Do not install the purifier above any electric socket.
  6.  Avoid sharp bends to the pipes of the product.
  7. Do not use an extension cord.
  8.  Make sure you test the input water TDS (Total dissolved salts) before installing the purifier. The maximum input TDS should not exceed 2000 PPM.

TAKING CARE OF YOUR PUREIT ECO WATER SAVER MINERAL RO+UV+MF PURIFIER

  1.  Use only the plug provided with the purifier.
  2.  The purifier should not be connected to any hot water tap. Do not run hot water over 45°C through the purifier.
  3.  Water from wastewater tubes is not suitable for drinking. You can use that water for gardening or cleaning floors.
  4.  Store water only in the purifier and don’t use other bottles and containers. If you do so, water may get contaminated.

KEEP YOURSELF SAFE

pureit-B08PBPVJZP-Eco-Water-Saver-
FIG-3

  1.  Do not open the purifier for cleaning or for any replacements. This can be done only by qualified company personnel or an authorized agent.
  2.  Do not plug or unplug the power cord with wet hands to avoid any untoward accident due to electrical shock or fire.
  3.  Do not splash the filtration system with water while cleaning.
  4.  Do not put heavy or sharp objects on the purifier.
  5.  Never put the cord near stoves or heaters.
  6.  If the power cord is damaged, the power adapter must be replaced and not used
  7.  Always switch off the “Ball Valve” and electrical power in the case, you notice any leakage from the purifier or you are out of home for more than 2 days.
  8.  Ensure input pressure is more than 10 PSI and less than 30 PSI ***
  9.  In case the UV lamp breaks, carefully sweep all the fragments, wipe the area with a wet towel, and dispose of all the fragments including the used towel in a sealed plastic bag. Open windows to allow room to ventilate. Do not use vacuum cleaner. Hand over the bag to the service technician for proper disposal of the same when he visits to replace the UV lamp.
  10.  In case of any smoke or burning smell, switch-off power, remove the plug immediately, and call us at 1860-210-1000.

CLEANING & MAINTENANCE

Dispenserpureit-B08PBPVJZP-Eco-Water-Saver-FIG-4

STORAGE TANKpureit-B08PBPVJZP-Eco-Water-Saver-FIG-5

  1.  Do not use detergents, soap or wet cloth to clean the external parts. Use a dry and soft cloth to clean the front cover. It is recommended to use a 3M mop cloth for this.
  2.  Clean the dispenser by using disinfectants like bleach/hypochlorite (50 ppm available chlorine). Discard 2 liters of water after cleaning the dispenser.
  3.  Do not use any cleaning solution to clean the LED Display Panel. Damages ensuing thereof are not covered under warranty.
  4. Discard the water in the storage tank once in 15 days
  5. Drain the water in the storage tank if the purifier is not used for 2 days
  6. Clean the storage tank once a month with a disinfectant solution. To purchase this solution, call us at 1860-210-1000 now.
  7. How to clean the tank: Open the cleaning solution dispenser and put 1 ml of the disinfectant solution (10–15 drops) into the storage tank. (Ensure the tank is full). Drain the entire tank after 10 minutes.
  8. No foreign material (like dust/ants/insects/other pests) should enter the storage tank. The filtered water in the storage tank may deteriorate in the process.
  9. The point-of-use reverse osmosis drinking water treatment systems addressed by NSF-58 standard are designed to be used for the reduction of specific substances that may be present in drinking water supplies (public or private) which are considered to be microbiologically safe and are of known quality.
  10. The output water may continue to have flora that are harmless and pose no health hazard to normal healthy adults and children.

Sediment Filter

STEP 1: Close the ball valve before opening ESF housing for cleaning
STEP 2: Remove the water inlet tube which is attached to the housing

STEP 3: Rotate the housing clock-wise and remove it completely from the cap
STEP 4: Take out the grey coloured Carbon Sleeve and the Sediment Filter from the housing

STEP 5: Clean the Sediment Filter under a jet of water, rub by hand/tap gently to clean
STEP 6: After cleaning the filter, put it back in the housing and then put the grey colored Carbon Sleeve back into the housing

STEP 7: Insert the housing inside the cap and rotate it anticlockwise to engage the threads Ensure the housing is tightened till its original marking
STEP 8: Connect the water inlet tube to the housing

ATTENTION

  •  Close the ball valve before opening SF housing for cleaning.
  •  Please do not use any abrasive/pointed tool to clean the Sediment Filter as it may damage the Sediment Filter.
  •  In case you observe the rubber ring is dirty, clean the rubber ring &N fi x it on the housing again properly.
  •  Clean the inner portion of the housing as well.
  •  If required, a Spanner for opening ESF housing can be bought from Pureit service technician.

UNDERSTANDING THE ADVANCED ALERT SYSTEM

pureit-B08PBPVJZP-Eco-Water-
Saver-FIG- T

TECHNICAL SPECIFICATIONS

pureit-B08PBPVJZP-Eco-Water-
Saver-T-2

FAQs

How does Pureit Eco Water Saver Mineral RO+UV+MF work?
Pureit Eco Water Saver Mineral RO+UV+MF has a 7-Stage Purification System which ensures you get water that is sweet and always safe. In the first stage, the water passes through the Pre-Sediment Filter which removes fine and coarse particulate impurities/dirt. The second stage is the Pre-RO Carbon Filter that removes chlorine and organic impurities like harmful pesticides. It also adsorbs bad taste and odor-causing organic compounds from water. The third stage is the Mesh Filter which removes the remaining dirt. Then the water passes through the RO Membrane at high pressure, with the help of an inbuilt pump. The RO Membrane removes dissolved salts, hardness, pesticides, and heavy metals like arsenic, lead, and mercury. It also removes microbial contaminants like bacteria, viruses, protozoa, and cysts. The fifth stage is a high- intensity UV Chamber that acts as an additional stage of purification to further inactivate bacteria, virus and parasites to deliver safe water. After UV Chamber, water passes through a TDS Modulator that adds adequate quantities of essential minerals to the water. The sixth stage is the Post-RO Carbon Filter, which acts as a polisher and enhances the taste of purified water. Last stage is the Micro-Filtration (MF) Membrane which is added Post-RO and ensures that the water is purified not once but thrice!

What is the storage capacity of Pureit Eco Water Saver Mineral RO+UV+MF?
Pureit Eco Water Saver Mineral RO+UV+MF has a storage tank capacity of approx 9.5 to 10 liters under running water. The process of filling the storage tank is fully automatic and when you take water out of the tank, the purification process automatically starts and refills the storage tank.

How much time it take to purify water in Pureit Eco Water Saver Mineral RO+UV+MF?
Pureit Eco Water Saver Mineral RO+UV+MF can purify water up to 24 liters per hour. However, the time taken to purify depends on the life of the filters, the input water pressure, TDS, and other impurities present in water.

How will I get new Consumables/Membranes replaced?
You need to call the Pureit Helpline and order a Germkill Kit. Our technician will visit your place and replace the Germkill Kit at a nominal cost.

Why is the “Tank Full” indicator blinking when I switched on the purifier for the first time?
Pureit Eco Water Saver Mineral RO+UV+MF has been designed in such a way that during the first time startup of the device, the “Tank Full” indicator will blink for approximately 15 minutes and then normalize for usage.

Can I drink the first purification cycle of water from the purifier?
No. After Pureit Eco Water Saver Mineral RO+UV+MF is installed or whenever the Germkill Kit(s) are replaced, discard the first cycle of water (10 liters) that is filled in the storage tank.

What should I do if there is no purified water in the storage tank?
In case there is no purified water in the storage tank then you need to first check for LED indications. If it shows the Tank icon blinking post- installation, there is no water supply then you can check whether the Ball Valve is closed or the power is off. If none of the above cases are true, please call Pureit Helpline.

Can I open and service my purifier?
It is not recommended to open and service devices by an individual. Call our Pureit Helpline if you face any issue which requires servicing and opening the device.

Can I use any type of water to purify through my Eco Water Saver Mineral RO+UV+MF?
Pureit Eco Water Saver Mineral RO+UV+MF will purify “potable” water for the removal of hardness and other impurities to give you safe drinking water. If the input water has impurities normally not present in drinking water (high iron/ turbidity/ microbial contamination etc.) or water is from an unknown source (river/lake/pond/ borewell etc.) then suitable pre-treatments may be required.

The Advance Alert System did not give me 15 days warning before the purifier stopped working. Why is it so?
There may be several reasons for this: While the Germkill Kits and the Pre- Sediment Filter have fixed replacement schedules, depending on your input water quality the Pre-Sediment Filter might need a replacement even before the purifier gives you an alert. In such cases, please contact Pureit helpline on 1860-210-1000 and get the Pre-Sediment Filter cleaned/replaced. Also, Advance Alert System will alert you basis the pump running hours. The purifier will communicate the alert only if the purifier is in a switched-on condition during the scheduled alert time. Post the completion of the scheduled alert time, Auto Shut off of water will be activated automatically for the GKK, even if the purifier is in a switched off condition.

Does Pureit Eco Water Saver Mineral RO+UV+MF remove arsenic, fluoride, and nitrates?
Like other ions, the RO technology can also remove arsenic, fluoride, and nitrates.

Can I use the rejected water?
It is not recommended to use the reject water for any kind of consumption (drinking or cooking). It can probably be used for gardening or cleaning floors.
What should I do if any part of the purifier is broken?Please call the Pureit Helpline. We will guide you on the repairs required. You would need to buy the replacement parts at an additional cost.

What should I do if there is a leakage from the purifier?
Turn off the Ball Valve and switch off the power, if you find any failure. Check for any visually improper fitments and then call our Pureit Helpline at 1860-210-1000 and register a service request.

How long the stored water in Pureit Eco Water Saver Mineral RO+UV+MF can be used for drinking?
You can use stored water for 2 days. If it is not used for more than 2 days we advise you to discard that water, refill and then consume.

Can the Pre-Sediment Filter or the other filter parts choke before the Advance Alert?
While the Germkill Kits and the Pre-Sediment Filter have a fixed replacement schedule, you might be required to change the filters in the interim depending on the quality of your input water. Should the tap flow rate be very less or if it is taking too long for the tank to fill, then please contact the Pureit helpline at 1860-210-1000 to change the membranes? These extra visits will be chargeable as per T&C.

How can I clean my Pureit Eco Water Saver Mineral RO+UV+MF?
It is recommended to clean dry or wet wiping with 3M mop cloth. Do not spray water on the device front cover as it may damage the electronic part. Do not use soap or hard cleaning detergents.

What should I do if the water from the purifier tastes unusual or the purification is taking more time?
Please call the Pureit helpline at 1860-210-1000. Our technician will visit you and help you resolve all the issues.

What are the ideal usage conditions for an RO technology-based water purifier?
The point-of-use reverse osmosis drinking water treatment systems addressed by NSF-58 standard are designed to be used for the reduction of specific substances that may be present in drinking water supplies (public or private) which are considered to be microbiologically safe and are of known quality.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals