safetrust 8845-100 IoT Sensor Mullion User Guide
- June 10, 2024
- safetrust
Table of Contents
8845-100 Quickstart Guide
Last Updated: March 202
In the box
| #6-32 x .375” spanner security screw
Option 1: Secures the top
and bottom casing together
---|---
| Nylon wall plugs
Used to brace the
screws inside the wall
| #6-32 x .375” phillips flat head screw
Option 2: Secures the top
and bottom casing together
| Sheet metal screw
SCR PTP, 2X6MM BLUE, ZINC CR3
For mounting to wall
What you’ll need
- A working internet connection
- Cable, 5-12 conductor (Wiegand), 4 conductor Twisted Pair Over-All Shield and UL approved, Belden3107A or equivalent (OSDP)
- Linear DC power supply
- Metal or plastic junction box
- Drill with various bits for mounting hardwar
Installation
For a wall mounted installation, begin by pre-drilling your holes and insert the nylon screw plugs provided to support the weight of the reader. Once secured to the wall, you can fix the black plate to the wall using the screws (SCR PTP, 2X6MM BLUE, ZINC CR3) provided.
The next step is to connect the wires as per the wiring table above. Once the back plate has been fitted and the wiring is complete, the top casing can be inserted onto the bottom casing like shown above. Complete the hardware installation by fixing either the snake eye screw (SMF #632X5/16″ SS) or a Phillips screw (SMF #6-32X5/16″ SS) to bottom casing.
Configuration
Open the Safetrust Wallet APP and select Manage Sensor tab. Make sure your system admin has set you up with this role.
With the Admin Installer tab open from the App, bring the phone in range of the IoT Sensor and once visible from the App, highlight and select “Configure”.
- Choose an Identity System.
- Specify the Type of access from the dropdown (eg. Door, Gate etc.)
- Assign a short Name and Description using alphanumeric characters.
- Choose an Output for the sensor (the default is set to Wiegand).
When the IoT Sensor information is saved successfully to Credential Manager and assigned to the Identity System, the new description will appear in the Manage Sensor tab with a unique serial number assigned.
Testing
Regulatory Information
FCC: This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Canada Radio
Certification: This device complies with Industry Canada license-exempt RSS
standard(s). Operation is subject to the following two conditions: (1) this
device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the
device.
CE Marking: Safetrust hereby declares that these proximity readers are in
compliance with the essential requirements and other relevant provisions of
Directive 1999/5/EC.
Support
hank you for purchasing the Safetrust IoT Sensor Mullion.
Support
If for any reason you need assistance with your installation, please contact
your local Sales representative
www.safetrust.com/support
Safetrust Inc. | safetrust.com
sales@safetrust.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>