Pureit RO+MFUV CLASSIC NXT water purifier Instruction Manual
- June 5, 2024
- pureit
Table of Contents
Welcome to the Pureit family
World’s largest selling water purifier company#
INSTRUCTION MANUAL
NEW
Attractive, Space-Saving Design at an Affordable Price
KNOW YOUR PUREIT
*CLASSIC NXT RO+MF/UV PURIFIER**
- Tap
- Reject Water Tube
- Compound ESF Outlet Tube
- Compound ESF
- ESF Inlet Tube
- Diverter
- Ball Valve
UNIQUE FEATURES OF PUREIT
*CLASSIC NXT RO+MF/UV PURIFIER**
| ADVANCED 6 STAGE PURIFICATION PROCESS WITH RO+MF
Every drop of water you drink is sweet and always safe.
---|---
| 100% RO PURIFIED WATER
All water passes through RO ensuring no mixing of purified and impure water.
Only RO can remove harmful chemicals like Lead, Mercury, etc.
| TURNS HARD WATER UP TO 2000 PPM INTO SOFT AND SWEET WATER
| BEST-IN-CLASS WATER STORAGE CAPACITY OF 7 LITRES**
You will never run out of purified water.
| ADVANCED VOLTAGE FLUCTUATION GUARD
Water purifiers can run without voltage stabilizer.
| POWER SAVING MODE
Water purifier goes on standby once the tank is full, saving power.
| UNITED STATES ENVIRONMENT PROTECTION AGENCY (USEPA) COMPLIANT
Meets the toughest safety standards by removing 1 Cr virus and 10 Cr bacteria
from 1L water.
| 100% FOOD GRADE PLASTIC***
Prevents harmful toxins from leaching into water, unlike non-food grade
plastics.
Basis the water purifier purchased, it will either have UV or MF Best-in-class water storage among the class of branded Reverse Osmosis based in-home water purification devices under MRP. (incl of all taxes) of Rs. 10000 only. (7 Litres under running water conditions) Applicable for all water contact parts.
PUREIT ADVANCED PLUS RO+MF+MP PURIFIER’S ADVANCED PURIFICATION PROCESS
-
Pre-Sediment Filter
Removes fine and coarse particulate impurities/dirt and improves the life of the Carbon Filter. -
Pre-RO Carbon Filter
Removes chlorine and organic impurities like harmful pesticides. It also absorbs bad taste and odour causing organic compounds from water. -
Mini Filter
Removes remaining fine and coarse particulate impurities/dirt and improves the life of RO Membrane. -
RO Membrane
Removes dissolved salts, hardness, pesticides, and heavy metals like arsenic, lead, and mercury. It also removes microbial contaminants like bacteria, viruses, protozoa, and cysts. -
Micro Filtration (MF) Membrane
Micro Filtration Filter is added Post-RO, which ensures that the water is purified not once but twice. -
Post-RO Carbon Filter
This level of purification acts as a polisher and enhances the taste of purified water.
INSTALLING YOUR PUREIT
*CLASSIC NXT RO+MF/UV PURIFIER**
- The purifier should be installed by a trained Pureit technician.
- It can be wall-mounted or used as a tabletop purifier.
- The purifier should be placed in an area that is free of ants/insects/other pests.
- The purifier should be placed close to the plumbed inlet connection (not more than 1.5 meters).
- Do not install the purifier above any electric socket.
- Avoid sharp bends to the pipes of the product.
- Do not use an extension cord.
- Before installing the purifier please check the inlet pressure.
- Make sure you test the input water TDS (Total dissolved salts) before installing the purifier. The maximum input TDS should not exceed 2000ppm.
- Do not connect the purifier to any hot water tap.
- Please do not terminate the reject line tubing directly into the drainage (keep it hanging over the drainage).
- Do not place the unit where it will be exposed to freezing and/or direct sunlight and ensure there is enough ventilation.
*TAKING CARE OF YOUR PUREIT
CLASSIC NXT RO+MF/UV PURIFIER
**
Cleaning
- Clean the tap nozzle using disinfectants like bleach/hypochlorite (50 PPM available chlorine). Discard 2 liters of water after cleaning the dispenser.
- Clean the external portion of the purifier using a dry cloth only. Do not use any detergent or soap.
- Do not clean aggressively or rub the surface as this might lead to scratches on the parts.
- Never splash water on the purifier while cleaning.
- Do not try to open the purifier for cleaning or for any replacements. This can be done only by qualified company personnel or an authorized agent.
- You should maintain good hygiene in the area around your water purifier. Ensure that this area is free of ants/insects/other pests.
- Do take care of the reject line and other tubes while cleaning the purifier else water can flow into the kitchen.
Storage Tank
- Discard the water in the storage tank once in 15 days through the tap.
- Always drain the water in the storage tank if you have not used the purifier for more than 2 days.
- Do not allow any foreign or unexpected material (like dust/ants/insects/other pests) to enter the storage tank. The filtered water in the storage tank may deteriorate in the
Other Important Instructions
- When you are away or during overhead tank cleaning always ensure to switch off the electrical power and the ball valve.
- Do not put any heavy or sharp objects on the purifier.
- Please dispose of the used consumables like Sediment Filters, Carbon Filters, and Membranes along with the other household waste through the municipal disposal system.
Disposal Guidelines (Electrical): To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate electrical items in this product such as power supply adaptors, control circuits, LED panels,s, and wiring from other types of waste and recycle them responsibly to promote sustainable use of material resources. Contact either the retailer where you purchased this product or the local government once for details of where and how these items can be taken for environmentally safe recycling.
KEEP YOURSELF SAFE
- Do not consume the water from the wastewater tube for drinking purposes. However, you can use that water for gardening or cleaning the floors.
- Do not plug or unplug the power cord with wet hands. Ensure that the plug isn’t wet while plugging in, or plugging out to avoid risks such as electrical shock or fire.
- Keep the cord away from wiring conjunctions to avoid hazards. Never put the cord under rugs, near heat resistors, radiators, stoves, or heaters.
- If the power cord is damaged, the power cord must be replaced and not used.
- In case of any smoke or burning smell, remove the plug immediately and call the Pureit
- When shifting your house, get the purifier duly inspected and packed by the Pureit service technician. Remove water from the Storage Tank and pack the purifier properly in case of shifting.
- Please ensure to switch off the power whenever you turn off the Ball Valve.
- The point-of-use reverse osmosis drinking water treatment systems addressed by the NSF-58 standard are designed to be used for the reduction of specific substances that may be present in drinking water supplies (public or private) which are considered to be microbiologically safe and are of known quality.
- The output water may continue to have flora that is harmless and poses no health hazard to normal healthy adults and children.
TECHNICAL SPECIFICATIONS
PUREIT ADVANCED PLUS RO+MF+MP Model Pureit Advanced Plus RO+MF+MP
Dimensions (HXWXD)| 380mm x 166mm x 423mm
Weight (Complete Unit)| 6.8 Kg
Flow Rate| Upto 10-12 LPH
Storage Tank Capacity| 5 Litres1
6 Stage Purifying Technology
| Pre-Sediment Filter, Pre-RO Carbon FiltL Mini Filter, Reverse Osmosis Membrane, Micro Filtration Membrane, and Post-RC) Carbon Filter
Membrane Type| thin film composite spiral wound
Pump Type| Diaphragm pump, 24V DC
% Recovery?| Typically 25%
TDS Reduction;| 90% (min.)
Input Water| PH range 6.5-8.5, Temperature range 10°C-40°C
Power Rating| 36 Watts
Pressure Rating| 10-30 PSI’
Input Voltage| 100-300 V a.c., 50 Hz
Material of construction for plastic parts| Food safe, non-toxic plastics
Length of Power Cord| ‘ 5 meters
Total Dissolved Solids in input water| .o 2000 mg/lits
Total Hardness| $00 mg/lit (max.)
Iron in Input Water| 0.3 mg/lit (max.)
Turbidity in Input Water| 1 NTU (max.)
Germkill Kit™ (GKK)|
---|---
Material of Construction| Food safe, non-toxic plastics
GKK| Pre-Sediment Filter – 1 No.
Pre-RO Carbon Filter – 1 No.
Post-RO Carbon Filter – 1 No.
Mini Filter – 1 No.
RO Membrane – 1 No.
Micro-Filtration (MF) Membrane – 1 No.
Germkill performance standard| Meets stringent international criteria for
microbiologically safe drinking water – e.g. Environmental Protection Agency
(EPA), USA
Ordering GKK|
There is 1 Sediment Filter (SF) and 1 Germ Kill Kit (GKK) in the device that
needs to
be replaced periodically.|
SF| May require cleaning/replacement basis the water quality
GKK| Needs to be replaced approximately every 1 year 6 from the date of
installation
1 4.8 ~ 5.2 under running water conditions.
2 Permeate flow rate and recovery are based on standard test conditions and
may vary depending on input water quality, TDS, pressure, and life of Filter
elements.
3 Input water quality and TDS content are important determinants of output
water quality.
4 If input pressure exceeds 30 PSI, please install a company-provided
pressure-reducing valve at an additional cost. If the pressure is less than 10
PSI then you need to buy a ‘Pressure enhancing pump’ at an additional cost.
The device should not be installed in a house where input pressure is greater
than 60 PSI. Post-RO Carbon Filter fitted in the device may need to be changed
intermittently at extra cost in case you face smell issues. Technical
specifications are subject to change or improvement without prior notice.
5 In case the TDS is >1000 PPM, a company-provided antiscalant is recommended
to be installed This has to be purchased at extra cost.
6 This is based on standard consumption of 10 liters per day, with an input
TDS of 750 PPM, 25° water, and 18 PSI pressure. Depending on the variation
from above you may need to change the GKK / parts even before the stipulated
time.
FAQs
How does Pureit Advanced Plus RO+MF+MP purify water?
Pureit Advanced Plus RO+MF+MP has a 6-stage purification process which
ensures you get water that is ‘As Safe As Boiled Water’ and also removes
excess Total Dissolved Solids (TDS) to make your water tastier.
Stage 1st
Pre-Sediment Filter: Removes fine and coarse particulate
impurities/dirt and improves the life of the carbon filter.
Stage 2nd:
Pre-RO Carbon Filter Removes chlorine and organic impurities like
harmful pesticides. It also absorbs bad taste and odor-causing organic
compounds from water.
Stage 3rd:
Mini Filter: Filters water further to ensure removal of finer
particulate impurities.
Stage 4th:
RO Membrane: Removes dissolved salts, hardness, pesticides, fluoride,
and heavy metals like arsenic, lead, and mercury. It also removes microbial
contaminants like bacteria, viruses, protozoa, and cysts.
Stage 5th:
Micro-Filtration Membrane(MF):
Micro-Filtration Filter is added Post-RO, which ensures that the water is
purified not once but twice.
Stage 5th:
Micro-Filtration Membrane(MF):
Micro-Filtration Filter is added Post-RO, which ensures that the water is
purified not once but twice.
Stage 6th:
Post-RO Carbon Filter: Last level of purification acts as a polisher and
enhances the taste of purified water.
What is the storage capacity of Pureit Advanced Plus
RO+MF+MP?
Pureit has a Storage Tank capacity of up to 5 liters. The storage tank is
fully automatic and well shielded and as and when you take water out of the
tank, the purification process starts automatically again and refills the
storage tank.
How much time does it take to purify water in Pureit Advanced Plus RO+MF+MP?
Pureit can purify water up to 10-12 liters per hour depending on the device
you have purchased. However, the time taken to purify depends on the life of
the filters, the input water pressure, TDS, and other impurities present in
the water.
Does Pureit Advanced Plus RO+MF+MP remove arsenic, fluoride, and nitrates?
Like other ions, the RO technology can also remove arsenic, fluoride, and
nitrates.
How will I get new consumables/membranes replaced? You need to call the Pureit
helpline and order the consumables. The customer care specialist will visit
your place and replace the consumable/Germkill Kit at a nominal cost.
What are all the consumables which are to be replaced? You need to
replace/clean the sediment filter basis water quality and GKK approximately
every 1 year from date of installation.
Can I drink the first purification cycle of water from the purifier?
No, the recommendation is to throw the first cycle of water that is filled in
the storage tank when the new Pureit purifier is installed and also whenever
the Germkill Kit is replaced.
Can I open and service my purifier?
It is not recommended to open and service purifier by an individual. Call our
Pureit helpline if you face any issue which requires servicing and opening of
the purifier.
Can I use reject water?
It is not recommended to use the rejected water for any kind of human/pet
consumption (drinking or cooking). It may be used for gardening or cleaning
floors.
What should I do If any part of the purifier Is broken? Please call the Pureit
helpline. Our technicians will visit your house and guide you on the repairs
required. There will be a nominal visiting charge and you would need to buy
the parts required.
What should I do If there Is leakage from the purifier? First, switch off the
ball valve if you find any leakage from the purifier and turn off the power
switch. Check for any visual improper fitment and then call our Pureit
helpline number and register a service request.
How long the stored water In Pureit Advanced Plus RO+MF+MP can be used for
drinking?
You can use stored water for 2 days. If it is not used for more than 2 days we
advise you to discard that water, refill, and then consume it.
| Reach Pureit @
1860-210-1000
1860-180-1000
www.pureitwater.com
---|---
WORLD’S LARGEST SELLING WATER PURIFIER COMPANY #
WIDE RANGE OF RO PURIFIERS FROM PUREIT#
Based on unit shipment sales for 2016; excludes pitchers and faucet-mount
system sales. The analysis includes in-home point-of-use water treatment
systems only.
Disclaimer: All images used in this manual are illustrative and the actual
product may differ.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>