Pureit RO COPPER MINERAL Instruction Manual

Pureit RO COPPER MINERAL

KNOW YOUR PUREIT COPPER+ MINERAL RO+UV+MF

1. LED Display Panel

2. Touch buttons – Copper Enriched
   Water & Ambient RO Water

3. Water Dispensing Outlet

4. Pre-sediment Filter

5. Inlet Water Tube

6. Reject Water Tube

7. Diverter

8. Ball Valve

9. Drip Tray

10. Manual Dispense Tap

UNIQUE FEATURES

UNIQUE TECHNOLOGY

This is a graphic representation of filters

An advanced purier that brings together modern technology and traditional goodness to enhance your family’s health. It’s advanced 7 stage purication process with RO+UV+MF puries water and its proprietary Copper Charge TechnologyTM~ charges it with goodness of copper

1. Pre-Sediment Filter (SF)
   Removes fine and coarse particulate impurities/ dirt and improves life of the Carbon Filter.

2. Pre-RO Carbon Filter
   Removes chlorine and organic impurities such as harmful pesticides. It also absorbs bad taste and odor-causing organic compounds from water.

3. Mesh Filter
   Filters water further to ensure removal of finer particulate impurities.

4. RO Membrane
   Removes dissolved salts, hardness, pesticides and heavy metals like arsenic, lead and mercury. It also removes microbial contaminants like bacteria, virus, protozoa and cysts.

5. UV Chamber
   Acts as an additional stage of purification to further inactivate bacteria, virus and parasites to deliver safe water.

6. Post RO Carbon Filter
   This level of purification acts as a polisher and enhances the taste of purified water.

7. Micro Filtration (MF) Membrane
   Micro Filtration Membrane is stage after Post-RO and UV, which ensures that the water is purified not once but thrice.**Advance Alert System will alert you 15 days before end of every 180 days (approximately) or 15 hours before completion of every 200 hours of pump running time, whichever is earlier. The purifier will communicate the alert only if the purifier is in a switched on condition during the scheduled alert time. Post the completion of the scheduled alert time, Auto Shut o™ of water will be activated automatically only for GKK, even if the purifier is in a switched o condition. $ Representation of the US EPA torture test of 4 log virus removed from 1 ml of contaminated water. ~Copper Charge Technology is a unique proprietary technology which is based on electrochemical dissolution of copper in water. # Smart technology which ensures precise dosing in every glass of water. Consumption of 2 litres of copper charged RO water every day, will add upto approximately 30% of the RDA for copper( for adults, as guided by the Indian Council of Medical Resarch, ICMR) ^7.6 to 8 litres in running water conditions. ***Applicable for all water contact parts.

INSTALLING YOUR PUREIT COPPER+ MINERAL RO+UV+MF

1. The purifier should be installed by a trained Pureit technician.
2. It can be wall-mounted or used as a table top purifier.
3. The purifier should be placed in area which is free of ants/insects/other pests.
4. The purifier should be placed close to the plumbed inlet connection (not more than 2 metres).
5. Do not install the purifier above any electric socket.
6. Avoid sharp bends to the pipes of the product.
7. Do not use an extension cord.
8. Make sure you test the input water TDS (Total dissolved salts) before installing the purifier. The maximum input TDS should not exceed 2000 PPM.

TAKING CARE OF PUREIT COPPER+ MINERAL RO+UV+MF

1. Use only the plug provided with the purifier.
2. The purifier should not be connected to any hot water tap. Do not run hot water over 45°C through the purifier.
3. Make sure that the power is kept on to dispense the water. Press the Touch button to dispense water from the storage tank
4. Water from waste water tube is not suitable for drinking. You can use that water for gardening or cleaning oors.
5. Store water only in the purifier and don’t use bottles and containers. If you do so, water may get contaminated.

CLEANING AND MAINTENANCE

Water Dispensing Point

1. Do not use detergents, soap or wet cloth to clean the external parts. Use dry and soft cloth to clean the front cover. It is recommended to use a 3M mop cloth for cleaning.
2. Clean the dispenser by using disinfectants like bleach/hypochlorite (50 PPM available chlorine). Discard 2 litres of water after cleaning the dispenser.
3. Discard water from detachable tray & maintain in dry condition.

Storage Tank

1. Discard the water in the storage tank once in 15 days.
2. Drain the water in the storage tank if purifier is not used for 2 days.
3. Clean the storage tank once a month with disinfectant solution. To purchase this solution, call us at 1860-210-1000 now.
4. How to clean the tank: Open the cleaning solution dispenser and put 1 ml of the disinfectant solution (10–15 drops) into the storage tank. (Ensure the tank is full). Drain the entire tank after 10 minutes.
5. No foreign material (like dust/ants/insects/other pests) should enter the storage tank. The ltered water in the storage tank may deteriorate in the process.
6. The point-of-use reverse osmosis drinking water treatment systems addressed by NSF-58 standard are designed to be used for the reduction of specic substances that may be present in drinking water supplies (public or private) which are considered to be microbiologically safe and are of known quality.
7. The output water may continue to have ora which are harmless and pose no health hazard to normal healthy adults and children.Disposal Guidelines (Electrical): To prevent possible harm to the environment or human health from uncontrolled waste
   disposal, please separate electrical items in this product such as power supply adaptor, control circuits, LED panel, and
   wiring from other types of waste and recycle them responsibly to promote sustainable use of material resources.
   Contact either the retailer where you purchased this product, or local government oce for details of where and
   how these items can be taken for environmentally safe recycling.

KEEP YOURSELF SAFE

1. Do not open the purifier for cleaning or for any replacements. This can be done only by a qualified company personnel or an authorized agent.

2. Do not plug or unplug the power cord with wet hands to avoid any untoward accident due to electrical shock or re.

3. Do not splash the filtration system with water while cleaning.

4. Do not put heavy or sharp objects on the purifier.

5. Never put the cord near stoves or heaters.

6. If the power cord is damaged, it must be replaced and not used again.

7. Always switch-o the “Ball Valve” and electrical power in case you notice any leakage from the purifier or you are going out of home for more than 2 days.

8. Ensure input pressure is more than 10 PSI and less than 30 PSI ***

9. In case UV lamp breaks, carefully sweep all the fragments, wipe the area with a wet towel, and dispose all the fragments including the used towel in a sealed plastic bag. Open windows to allow room to ventilate. Do not use vacuum cleaner. Hand over the bag to
   the service technician for proper disposal of the same when he visits to replace UV lamp.

10.  In case of any smoke or burning smell, switch-o power, remove the plug immediately and call us at 1860-210-1000.*** If it is more than 30 PSI, you need to use ‘Pressure reducing Valve’ which must be bought at an additional cost. If the pressure is less than 10 PSI then you need to buy ‘Pressure enhancing Pump’ which can be bought at an additional cost. Ensure you buy them from the authorized service personnel of Pureit

CLEANING AND MAINTENANCE

Sediment Filter

ATTENTION

• Close the ball valve before opening SF housing for cleaning.
• Please do not use any abrasive / pointed tool to clean the Sediment Filter as it may damage the Sediment Filter.
• In case you observe the rubber ring is dirty, clean the rubber ring & fix it on the housing again properly.
• Clean the inner portion of the housing as well.
• If required, a Spanner for opening ESF housing can be bought from Pureit service technician.

LED INDICATOR GUIDE

• While the Germkill Kit and the Sediment Filter have a xed replacement schedule, you might be required to clean/change the SF in
  the interim depending on the quality of your input water. If the External Sediment Filter is not replaced/cleaned in time (when the blue blinking happens), it may aect the performance of the purier.

• Permeate ow rate and recovery are based on standard test conditions and may vary depending on input water quality, TDS,
  pressure and life of Filter elements.

• Input water quality and TDS content are important determinants of output water quality.

•  If input pressure exceeds 30 PSI, please install a company provided pressure reducing valve at an additional cost. If the pressure
  is lesser than 10 PSI then you need to buy ‘Pressure enhancing pump’ at an additional cost. Device should not be installed in a house
  where input pressure is greater than 60 psi.

• After every 400 hours of pump running time or 360 days of clock time, whichever is earlier, the respective Germkill Kit needs to be
  changed. Every 400 hours of pump running time typically gives 4000 filitres of puried water under test conditions of 10 PSI input
  pressure, 750 ppm TDS and 25 °C temperature. Any variations from the test conditions will lead to variations in the filtered life

TECHNICAL SPECIFICATIONS

• Technical specications are subject to change or improvement without prior notice.
• In case the TDS is >1000 PPM, a company provided anti-scalant is recommended to be installed.
• This has to be purchased at extra cost.
• If the iron content in the input water is more, it is recommended to install a company provided iron filter at an additional cost.
  $ 7.6 to 8 litres in running water conditions at extra cost.

FAQs

• How does Pureit Copper+ Mineral RO+UV+MF work?
  Pureit Copper+ Mineral RO+UV+MF has a 7 stage purication system that ensures you get ‘Safer than boiled waterTM’. It also removes excess total dissolved salts (TDS) to make the water tastier.

• What is the storage capacity of Pureit Copper+Mineral RO+UV+MF?
  Pureit Copper+ Mineral RO+UV+MF has a storage tank capacity of upto 8 Litres under running water. The process of lling the storage tank is fully automatic. When you take water out of the tank the purication process automatically rells the storage tank.

• How much time it takes to purifiy water in Pureit Copper+ Mineral RO+UV+MF?
  Pureit Copper+ Mineral RO+UV+MF can purify water upto 28 litres per hour. However, the time taken to purify is inuenced by life of the filters, the input water pressure, and other impurities present in water.

• How will I get new Consumables/Membranes and Copper module replaced?
  You need to call the Pureit Helpline and order for a Germkill Kit™. A technician will visit your place to replace it, at a nominal cost.

• Can I drink the rst purication cycle of water from the purifier?
  After Pureit Copper+ Mineral RO+UV+MF is installed or whenever the Germkill Kit™ (s) are replaced, discard the rst cycle of water (8 litres) that is filled in the storage tank.

• What should I do if there is no water being dispensed from the spout?
  In case you cannot dispense water from the spout, rst check whether the power supply is on. If it is on, then check if there are any fault indicators on, or ” SF/GKK” indicator is blinking. Get either the fault resolved or Germkill Kit™ replaced. If none of these indicators are lit up on the indicator panel, then check if the ball valve is closed. If none of these cases are true, then please call Pureit
  helpline for assistance.

• Can I open and service my purier?
  It is not recommended to open and service the device yourself. Call the Pureit helpline if you face any issue which requires servicing and opening the device.

• Can I use any type of water to purify through my Pureit Copper+ Mineral RO+UV+MF?
  Pureit Copper+ Mineral RO+UV+MF will purify “potable” water for removal of hardness and other impurities to give you safe drinking water. If the input water has impurities normally not present in drinking water (high iron/ turbidity/ microbial contamination etc.) or water is from unknown source (river/lake/pond/borewell etc.) then suitable pre-treatment may be required.

• The Advance Alert System™ did not give me 15 days warning before the purier stopped working.Why is it so
  There may be several reasons for this: While the Germkill Kits and the Pre- Sediment Filter have a pre-determined life, depending on your input water quality the Pre-Sediment Filter might need a replacement/cleaning even before the purifier gives you an alert. In such cases, please contact Pureit helpline and get the Pre-Sediment Filter replaced/cleaned. The purifier will communicate the alert only if the purifier is in a switched on condition during the scheduled alert time. Post the completion of the scheduled alert time, Auto Shut
  o™ of water will be activated automatically for GKK, even if the purier is in a switched o condition.

• Does Pureit Copper+ Mineral RO+UV+MF removearsenic, uoride and nitrates?
  Yes. RO technology can remove arsenic, uoride and nitrates.

• Can I use the reject water?
  It is not recommended to use rejected water for any kind of consumption (drinking or cooking). It can probably be used for gardening or oor cleaning.

• What should I do if any part of the purifier is broken?
  Please call Pureit helpline to guide you on any repairs required. You might need to buy the replacement parts at an additional cost.

• What should I do if there is a leakage from the purier?
  Turn o the ball valve and switch o the power, if you nd any failure. Check for any visually improper tment and then call Pureit helpline and register a service request.

• How long the stored water in Pureit Copper+ Mineral RO+UV+MF can be used for drinking?
  It is recommended for the stored water to be consumed within 2 days. Water stored for over 2 days should ideally be discarded.

• How do I know when I have to change my Germkill Kit™?
  Pureit Copper+ Mineral RO+UV+MF has an indicator panel with SF/GKK indicator that will blink to prompt you to call the Pureit helpline to get the respective GKK changed, whenever the life of the Germkill Kit™ is near expiry (refer to “Understanding LED indicator panel” section of this user manual for further details).

• Can the Pre-Sediment Filter or the other lter parts choke before the Advance Alert ?
  While the Germkill Kit™ and the Pre-Sediment Filter have a pre determined life, you might be required to change the filters in the interim depending on the quality of your input water. Should the tap ow rate be very low or if it is taking too long for the tank to ll, then please contact the Pureit helpline to change the membranes. These extra visits will be chargeable as per T&C.

• For how long can I continuously dispense water?
  Once the Soft-Touch button is pressed water dispenses for 3 minutes ( 2 minutes if in Warning/ ASO/Fault condition) and it automatically stops dispensing after that. In case you need more water, you need to press the button again. You can stop the ow of water in between by pressing the Soft- Touch button again.

• Will the Guided Alert System indicate any leakage complaints?
  No. It only indicates key electrical faults.

• How can I clean my Pureit Copper+ Mineral RO+UV+MF?
  To clean the device body clean dry or wet wiping with 3M foam mop/cloth is recommended. Do not spray water on the device front cover as it may damage the electronic part. Do not use soap or hard cleaning detergents.

• What should I do if the water from the purifier tastes unusual or the purication is taking more time?
  Please call the Pureit helpline. A technician will visit you to help resolve the issue.

• What should I do if the copper charged RO water is not dispensing?
  Please check if the Copper RO Water LED is blinking yellow, if yes then please do wait as device is in Copper Auto-Cleaning Mode. Once the auto-cleaning process is complete you can dispense Copper RO water by pressing the Soft- Touch button. If the copper LED is red, it will not allow dispensing. In such a case check for presence of water from the main line, wait for sometime, then switch o and switch on the purifier again. If the LED is still red, then contact Pureit helpline.

• Can I dispense water in the absence of electricity?
  Depending on the amount of water already filled in the tank, you can dispense upto 8 filtres of water even without electricity when tank is full by installing manual tap as spare by an authorized service technician. However, Copper RO water can be dispensed only with electricity as Copper is infused in real time.

Pureit Helpline
1860-210-1000
www.pureitwater.com

References

• pureitwater.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>