pureit UV G2 4 Stage Table Top Wall Mountable Instruction Manual
- June 13, 2024
- pureit
Table of Contents
pureit UV G2 4 Stage Table Top Wall Mountable
KNOW YOUR PUREIT MARVELLA UV G2
- Front cover lock
- LED indicator panel
- Storage tank
- Tap
- Sediment filter
- Inlet water tube
- Diverter
- Ball valve
UNIQUE FEATURES
4 LIT ERS STORAGE CAPACITY
Ready to serve even in the absence of electricity.
USEPA STANDARDS ON PROT ECTION•••
Meets stringent criteria of Environmental Protection Agency, EPA (USA) for
harmful virus and bacteria removal.
ADVANCED 4-STAGE PURIFICATION
Advanced 4-stage purification that ensures every drop of water from your
Marvella UV G2 is pure & safe to drink.
BEST IN CLASS UV LAMP
Powerful 11 W .. UV lamp for enhanced safety.
DOUBLE PURITY LOCK
Advance Alert System warns you 15 days• in advance when your purifier will
stop working.
Auto Shut of stops water flow when GKK life expires.
COMPACT, SLEEK AND COVERED DESIGN
Optimizes space and looks good in modern kitchen.
FULLY AUTOMATIC
Works without any intervention. The system senses if the water tank is not
full, purifies and stores water automatically.
TANK FULL INDICATOR
Indicates when the storage tank is full.
NO AMC
Lower cost of maintenance.
ADVANCED VOLTAGE FLUCTUATION GUARD
Protects your purifier from sudden voltage fluctuation ranging between 11 O
and 270 Volts.
BREAK RESISTANT TAP
Equipped with break resistant tap which is tested for up to 50000 operations.
UNIQUE TECHNOLOGY
This is a graphic representation of filters
- Sediment Filter (SF) (Raw Water Processor)
- Removes fine and coarse particulate impurities/ dirt and improves life of the Carbon Filter.
- Activated Carbon Filter
- Removes chlorine and organic impurities like harmful pesticides. It also adsorbs bad taste and odour-causing organic compounds from water.
- Mesh Filter
- QEnsures that no suspended/dirt particles enter the UV chamber.
- High Intensity UV Chamber
- High intensity UV rays ensure maximum UV intensity for inactivation of bacteria, virus and parasites to always deliver safe water.
- Based on 10 litres of water consumption per day.
- Pureit UV devices are fitted with an 11 watt UV lamp.
- Exceeds USEPA GERM KILL standard guide by removing 1 crore of viruses & 1 O crore bacteria from every litre of water
INSTALLING YOUR PUREIT MARVELLA UV G2
- The purifier should be installed by a trained Pureit technician.
- Pureit Marvella UV G2 has to be installed on the wall. In case you are using it in a table top condition, please either place its back touching fully on wall or otherwise hold it when you are operating any switch.
- Do not install the purification unit where it could freeze.
- Do not use an extension cord.
- Please ensure that the purifier is not installed near a cooking range.
- Do not install the purifier above an electric socket.
- Avoid sharp bends to the tube that is connected to the purifier.
- Install the purifier away from the sunlight.
TAKING CARE OF PUREIT MARVELLA UV G2
- After installation and GKK change, discard 5L~10L ( 3-5 Mins) before you start using your purifier.
- If you are out of home, switch-off the purifier and turn-off the Ball Valve.
- Ensure the input water temperature is between 10°C and 40°C. Do not connect the purifier to any geyser, heater etc.
- Ensure that the area around and beneath the purifier is kept clean at all the time. Ensure that this area is free of ants/insects/other pests.
- Don’t drop any of the components, or the purifier as a whole from a height. This may cause the components to fracture or break.
- Do not allow any foreign or unexpected material (like dust/ants/insects/other pests) to enter into the storage tank. The filtered water in the storage tank may deteriorate in the process.
- You can discard the water in the storage tank once in 15 days. Always drain the water in the storage tank if you have not used the purifier for more than 2 days.
Disposal Guidelines (Electrical): To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate electrical items in this product such as power supply adaptor, control circuits, LED panel, and wiring from other types of waste and recycle them responsibly to promote sustainable use of material resources. Contact either the retailer where you purchased this product, or local government office for details of where and how these items can be taken for environmentally safe recycling.
CLEANING AND MAINTENANCE
Water Dispensing Point
- You can clean the device by using disinfectants like bleach/hypochlorite ( 50 ppm available chlorine ). Discard 2 litres of water after cleaning the tap.
- External portion of the purifier must be cleaned using wet cloth only. Do not use any detergent or soap.
KEEP YOURSELF SAFE 
- Do not plug or unplug the power cord with wet hands. Ensure the plug isn’t wet while plugging in, or plugging out to avoid risks such as electrical shocks or fire. Plug the power cord in the right size socket to avoid sparks.
- Do not try to open the purifier for any reason. This can be done only by the qualified company personnel or authorized agent.
- If the power cord is damaged, it must be replaced and not used.
- Do not light candles/ diya on the purifier. Do not keep heavy or sharp objects, e.g. Radio etc. on the purifier.
- In case you notice any smoke or burning smell from your purifier, please switch off the power, unplug the cord, turn-off Ball Valve and call us at 1860-210-1000.
- Please dispose the used consumables like the Germ kill Kit along with the other household waste through the municipal disposal system.
- Do not use water not intended for drinking in Pureit System e.g. from abandoned or abused water bodies or water resources in which human, animal or industrial wastes are disposed or water that is extremely acidic or alkaline.
- The output water may continue to have flora which is harmless and pose no health hazard to the normal healthy adults and children.
- Always rely on the device alert system to change the Germ kill Kit (GKK). Auto Shut-off is the only additional assurance of safety.
- Never buy Marvella UV G2 or the Germ kill Kit (GKK) or spares from an unauthorized source. Always call on 1800-210-1000 and we will deliver and install a new GKK at your home.
- Marvella UV G2 does not alter pH or TDS of source water.
CLEANING AND MAINTENANCE
SF (Sediment Filter)
Rotate the housing clock-wise and remove it completely from the cap- Take out the Sediment Filter from the housing
- Clean the Sediment Filter under jet of water. rub by hand / tap gently to clean.
- After cleaning the filter, put it back in the housing.
- Insert the housing inside the cap & rotate it anticlockwise to engage the threads. Ensure the housing is tightened till its original marking.
ATTENTION
- Close the ball valve before opening SF housing for cleaning.
- The housing needs to be opened in wall mounted position only.
- Make sure the clamp is properly fixed on the wall & cap of housing.
- Keep the cap mounted on the wall. No need to remove the same.
- Please do not use any abrasive I pointed tool to clean the Sediment Filter as it may damage the Sediment Filter.
- In case you observe the rubber ring is dirty, clean the rubber ring & fix it on the housing again properly.
- Clean the inner portion of the housing as well.
- If required, a Spanner for opening ESF housing can be bought from Pureit service technician.
UNDERSTANDING THE DIGITAL DISPLAY SYSTEM
Warning: Solid Red: No Input water/ Low input water pressure ( <5 psi). Always switch off the power supply to device while turning off its water supply.
TECHNICAL SPECIFICATIONS
Material used for construction| Food safe, non-toxic, engineering plastics
Purification Capacity| This has been designed to give typically 6000 litres of
water under tested conditions of 20 psi input water pressure, 25° C
temperature, TDS 200 ppm, iron less than 0.3 ppm, pH 6.5-8.5 & turbidity less
than
1 NTU (input water quality)
Expiry period| Three years from packaging
Germkill performance standard| Meets stringent criteria of Environmental
Protection Agency, EPA (USA) for harmful virus and bacteria removal.
Net Contents| Sediment Filter – 1Unit, Activated Carbon Filter – 1Unit,
Gaskets – 4Units, Cleaning Solution – 1Unit and Muslin Cloth -1Unit
All technical specifications related to purification capacity/life/flow rate are the results under standard test conditions, which will vary depending upon different usage conditions like, input water quality, pressure and temperature.
FAQS
How does Marvella UV G2 purify water?
Marvella UV G2 has a 4-stage purification system which ensures you get water
that is
‘As safe as boiled water'”‘ that meets the stringent standards set by the
USEPA for Microbiologically safe drinking water. First, the water passes
through the Sediment Filter which removes fine and coarse particulate
impurities/dirt.The second stage is the Activated Carbon Filter'” that removes
remaining dirt, chlorine and organic impurities like harmful pesticides. It
also absorbs colour and odour causing organic compounds from water. Then the
water passes through Mesh Filter, which ensures that no suspended / dirt
particles enter the UV chamber. High intensity UV rays ensure maximum UV
intensity for inactivation of bacteria, virus and parasites to deliver safe
water always.
What is Advance Alert System•M?
Marvella UV G2’s Advance Alert System'” warns you 15 days’ in advance before
your consumable expires, so that you can get it replaced before the GKK life
expires and purifier stops working. Please refer to the LED indicator panel
instructions for details.
*Does this mean that I need to change the UV lamp after every 6000
litres?*
No. The UV lamp is designed to last typically for 10,000 working hours. You
need to change only the GKK after typically 6000 litres of water has been
purified.
Can I change the GKK?
It is not recommended for the users to change the GKK by themselves. Please
call Pureit Helpline when you need to replace the GKK.
Can I drink the first purification cycle of water from the purifier?
No, it is recommended to throw the first 5~1 O litres of water when the new
Marvella UV G2 purifier is installed, and also whenever the GKK is replaced.
It will only take 3-5 minutes.
Can I open and service my purifier?
It is not recommended to open and service purifier by an individual. Call
Pureit helpline if you face any issue which requires servicing and opening of
the purifier.
What should I do if any part of the purifier is broken?
Please call the Pureit helpline number. Our technicians will visit your house
and guide you on the repairs required. There will be a nominal visiting charge
and you would need to buy the parts required.
What should I do if water pressure at my home is less than 5 psi?
Technicians will suggest you to purchase a booster pump, so that pressure of
input water will be appropriate for functioning of the purifier.
What should I do if water pressure at my home is more than 30 psi?
Technicians will suggest you to purchase a pressure regulating value, so that
water pressure inside device will be regulated according to safety rating of
device.
- Under standard conditions of 20psi input pressure, 25°C temperature and turbidity of less than 1 NTU (input water quality) # Based on 10 litres of water consumption per day.