Dgd 2054030 DP Helmet Revamping Lum Perso C1 User Guide
- October 27, 2023
- Dgd
Table of Contents
Dgd 2054030 DP Helmet Revamping Lum Perso C1
FOR ADULTS ONLY
This product has been created exclusively and strictly for the use and
promotion of the DOM PÉRIGNON champagne brand. In no instance is this item
destined to be used as a safety device.
Contents
Usage
Personalize messages with Bluetooth
- Download and install mobile app by scanning the QR code
- Activate Bluetooth on your mobile device
- Open the app
- Tap on the “Bluetooth icon” on the top right and select the device’s name of the unit you wish to connect with ➢ Password: 123456
- To write or access the list of personalized messages, click on “Edit content”
- To write a new message, click “Add” ; next, click ”Save” to download the message
- Select your message and click “Send”. The message will now appear on the device
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical furnishing, basic precautions should always be followed, including the following :
- The light source of this item is not replaceable ; when the light source reaches the end of its life, the entire item must be replaced
- Check the good condition of the adaptor before using it. Do not use another charger than the one provided with the product
- Do NOT expose the product to heat or fire. Avoid storage in direct sunlight
- Always unplug this furnishing from the electrical outlet before cleaning
- Unplug from outlet before putting on or taking off parts
- Close supervision is necessary when this furnishing is used by, or near children, invalids, or disabled persons
- Use this furnishing only for its intended use as described in these instructions. Do not use attachments not recommended by the manufacturer
- Never operate this furnishing if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the furnishing to a service center for examination and repair
- Keep the cord away from heated surfaces
- Never operate the furnishing with the air openings blocked. Keep the air openings free of lint, hair, and the like
- Never drop or insert any object into any opening
- Do not use outdoors
- Do not operate where aerosol (spray) products are being used or where oxygen is being administered
- To disconnect, turn all controls to the off position, then remove plug from outlet
- If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard
- The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person
Batteries or rechargeable batterie s must not be disposed of in household
waste. Every consumer is required by the Act to dispose of batteries in
accordance with the collection points provided for in its common
Electrical and electronic equipment subjects to selective collection. Do not
dispose of waste electrical and electronic equipment with the unsorted
municipal waste but arrange to their curbside. By doing this, you are
contributing to the preservation of natural resources and the protection of
human health
Class 3 device
FCC Statement
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment. NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Please note that changes or modifications of this product is not expressly
approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>