xdobo X8 Portable 60W Speaker Instruction Manual
- July 20, 2024
- xdobo
Table of Contents
X8 Portable 60W Speaker
Quick Start Guide
1 Warning
*There may be noise when playing some songs with strong bass when the battery is low. This is normal phenomenon.Please ensure that the XDOBO X8 has enough power to maintain performance.
* Longly use the machine with high volume may cause damage to your hearing.
* XDOBO X8 built-in lithium battery, don’t use any kind of fast charger exceeding 5V/2A, such as PD fast charger, mobile phone fast charger,Qualcomm fast charger,gallium nitride fast charger etc. The voltage of these chargers can’t be recognized and compatible with the motherboard.
* Do not expose to sunlight/fire or similar overheating environment.
2 What is TWS?
TWS means true wireless stereo. Let’s say two Bluetooth speakers are able to be paired and playing music synchronously.
1: Please make sure these two speakers to be disconnected from other Bluetooth devices you turn them on. Then please turn on two speakers.
2: Select one of the speakers, double-click to enter the TWS pairing mode, and the yellow light flashes.
3: After the pairing is successful, the status yellow light of the main/slave machine will be on.
4: Turn on the Bluetooth of the device (mobile phone) at this time, find out “XDOBO X8” on your device, select it and connect it.
5: For the speakers that have been successfully paired with TWS, they will be quickly connected and paired automatically later once they turn on.
6: In TWS mode, EQ can be used.
7: In TWS mode, double-click to disconnect the TWS connection.
3 Key Function
4 Overview
5 LED Indicator
6 Bluetooth Connection
When the speaker is turned on, will flash blue light.
Find out the “X8″Bluetooth name on your device,selecting and connect it.
7 Specifications
- Bluetooth Version : 5.0
- Output Power : 60W
- Frequency Response : 80H2—18KHz
- Signabto-noise Ratio : 80248
- Charging Time ; About 3 hours
- Input Power : Type-C 5V/2A
- Playing Time : About 8 hours (varies by volume level and audio content)
- Size(L‘W’H) : 220°95*72(mm)
- Weight : 8609
8 Performance Optimization
* The usage time of speaker will vary depending on the volume and songs.
*Playing loudest or deep bass songs will speed up battery consumption.
* When the XDOBO X8 is adjusted to the maximum sound, it will protect the speaker components, including the optimization of battery durability and play time. That is, in order to play longer and reduce battery consump- tion, the balance of the tone will be adjusted appropriately, including the adjustment of the bass, treble and vocal parts. Therefore, there is a differ- ence in the level of deep bass between loudest and medium volumes.
* XDOBO recommends that the X8 be adjusted to a medium volume for listening, this will maintain the best sound and battery performance.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition, compliance with exposure requirements.