pureit RO+MF Water Selling Purifier Instruction Manual

June 6, 2024
pureit

**pureit RO+MF Water Selling Purifier Instruction Manual

**

KNOW YOUR PUREIT RO+MF/RO+UV2

Product Overview

  1. Tap
  2. Reject Water Tube
  3. Compound ESF Outlet Tube
  4. Compound ESF
  5. ESF Inlet Tube
  6. Diverter
  7. Ball Valve

UNIQUE FEATURES OF PUREIT RO+MF/RO+UV2

  • Advanced 6 stage purification through RO+MF / RO+UV2 technology
    UNIQUE FEATURES

  • Pureit RO+MF/RO+UV2 has 5 litre3 storage tank. So you can get purified water even when there is no electricity.
    UNIQUE FEATURES

  • Pureit RO+MF/RO+UV2 turns hard water upto 1800 ppm into soft and sweet water.
    UNIQUE FEATURES

  • Pureit RO+MF/RO+UV2 is equipped with break-resistant tap which is tested for upto 50000 times.
    UNIQUE FEATURES

  • 100% water passes through RO and UV/MF2 to give completely safe water always.
    UNIQUE FEATURES

  • Protects your purifier from sudden voltage fluctuation as high as 280 volts and also works in as low as 100 V a.c.
    UNIQUE FEATURES

  • Removes 1 crore virus in 1 litre of water4
    UNIQUE FEATURES

  1. Will vary basis the model; Pureit RO + MF has MF membrane, RO + UV has UV chamber.
  2. Dispensed volume under running water conditions up to 4.8 – 5.2L.
  3. Representation of the US EPA torture test of 4 log virus removed from 1 ml of contaminated water.

PUREIT RO+MF/RO+UV2 UNIQUE TECHNOLOGY

UNIQUE TECHNOLOGY

  1. Pre-Sediment Filter
    Removes fine and coarse particulate impurities/dirt and improves the life of the Carbon Filter.

  2. Pre-RO Carbon Filter
    Removes chlorine and organic impurities like harmful pesticides. It also absorbs bad taste and odour causing organic compounds from water.

  3. Mini Filter
    Filters water further to ensure removal of finer particulate impurities.

  4. RO Membrane
    Removes dissolved salts, hardness, pesticides and heavy metals like arsenic, lead and mercury. It also removes microbial contaminants like bacteria, virus, protozoa and cysts.

  5. Micro Filtration Filter / UV Chamber2
    Micro Filtration Filter / UV Chamber2 is added Post-RO, which ensures that the water is purified not once but twice.

  6. Post-RO Carbon Filter
    Last level of purification acts as a polisher and enhances the taste of the purified water.

INSTALLING YOUR PUREIT RO+MF/RO+UV2

  1. The purifier should be installed by a trained Pureit technician.
  2. It can be wall-mounted or used as a table top purifier.
  3. The purifier should be placed in area which is free of ants/insects/other pests.
  4. The purifier should be placed close to the plumbed inlet connection (not more than 2 metres).
  5. Do not install the purifier above any electric socket.
  6. Avoid sharp bends to the pipes of the product.
  7. Do not use an extension cord.
  8. Before installing the purifier please check the inlet pressure.
  9. Make sure you test the input water TDS (Total dissolved salts) before installing the purifier. The maximum input TDS should not exceed 1800 PPM.
  10. Do not connect the purifier to any hot water tap.
  11. Please do not terminate the reject line tubing directly into the drainage (keep it hanging over the drainage).
  12. Do not place the unit where it will be exposed to freezing and/or direct sunlight and ensure there is enough ventilation.

TAKING CARE OF YOUR PUREIT RO+MF/RO+UV2

Cleaning

  1. Clean the tap nozzle using disinfectants like bleach/hypochlorite (50 PPM available chlorine). Discard 2 litres of water after cleaning the dispenser.
  2. Clean the external portion of the purifier using a dry cloth only. Do not use any detergent or soap.
  3. Do not clean aggressively or rub the surface as this might lead to scratches on the parts.
  4. Never splash water on the purifier while cleaning.
  5. Do not try to open the purifier for cleaning or for any replacements. This can be done only by a qualified company personnel or an authorised agent.
  6. You should maintain good hygiene in the area around your water purifier. Ensure that this area is free of ants/insects/other pests.
  7. Do take care of the reject line and other tubes while cleaning the purifier else water can flow into the kitchen.

Storage Tank

  1. Discard the water in the Storage Tank once in 15 days through the tap.
  2. Always drain the water in the Storage Tank if you have not used the purifier more than 2 days.
  3. Do not allow any foreign or unexpected material (like dust/ants/insects/other pests) to enter into the storage tank. The filtered water in the storage tank may deteriorate in the process.

Other Important Instructions

  1. When you are away / during over head tank cleaning always ensure to switch off the electrical power and the ball valve.
  2. Do not put any heavy or sharp objects on the purifier.
  3. Please dispose the used consumables like Sediment Filters, Carbon Filters and Membranes along with the other household waste through the municipal disposal system

Disposal Guidelines (Electrical): To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate electrical items in this product such as power supply adaptor, control circuits, LED panel and wiring from other types of waste and recycle them responsibly to promote sustainable use of material resources. Contact either the retailer where you purchased this product or local government office for details of where and how these items can be taken for environmentally safe recycling.

KEEP YOURSELF SAFE

KEEP YOURSELF SAFE

  1. Do not consume the water from the waste water tube for drinking purpose. However, you can use that water for gardening or cleaning the floors.
  2. Do not plug or unplug the power cord with wet hands. Ensure that the plug isn’t wet while plugging in, or plugging out to avoid risks such as electrical shock or fire.
  3. Keep the cord away from wiring conjunctions to avoid hazard. Never put the cord under rugs, near heat resistors, radiators, stoves or heaters.
  4. If the power cord is damaged, the power cord must be replaced and not used.
  5. In case of any smoke or burning smell, remove the plug immediately and call the Pureit Helpline.
  6. When shifting your house, get the purifier duly inspected and packed by the Pureit service technician. Remove water from the Storage Tank and pack the purifier properly in case of shifting.
  7. Please ensure to switch off the power whenever you turn off the Ball Valve.
  8. The point-of-use reverse osmosis drinking water treatment systems addressed by NSF-58 standard are designed to be used for reduction of specific substances that may be present in drinking water supplies (public or private) which are considered to be microbiologically safe and are of known quality.
  9. The output water may continue to have flora which are harmless and pose no health hazard to normal healthy adults and children.

TECHNICAL SPECIFICATIONS

Pureit RO+MF/RO+UV 2

Model| Pureit RO + MF / RO + UV2
Dimensions (Height x Width x Depth)| 380 mm x 166 mm x 423 mm
Weight (Complete Unit)| 6.8 Kg
Flow Rate| Upto 10-12 LPH
Storage Tank Capacity| 5 Litres5

6 Stage Purifying Technology

| Pre-Sediment Filter, Pre-RO Carbon Filter, Mini Filter, Reversr Osmosis Membrane, Micro Filtration Membrane/ UV and Post-RO Carbon Filter
Membrane Type|
Pump Type| Diaphragm pump, 24V DC
% Recovery6| Typically 25%
TDS Reduction7| 90% (min.)
Input Water| PH range 6.5-8.5, Temperature range 10°C- 40°C
Power Rating| Classic RO+MF – 36 Watts / Classic RO+UV – 55 Watts
Pressure Rating| 10-30 PSI8
Input Voltage| 165-240V a.c., 50 Hz
Material of construction for plastic parts| Food safe, non-toxic, engineering grade plastics
Length of Power Cord| 1.5 metres
Total Dissolved Solids in input water| Up to 1800 mg/lit9
Total Hardness| 500 mg/lit (max.)
Iron in Input Water| 0.3 mg/lit (max.)
Turbidity in Input Water| 1 NTU (max.)

Germkill Kit TM **(GKK)**


Material of Construction| Food safe, non-toxic, engineering grade plastics
GKK| Pre-Sediment Filter – 2 Nos. Pre-RO Carbon Filter – 1 No. Post-RO Carbon Filter – 1 No. Mini Filter – 1 No.

RO Membrane – 1 No.

Micro Filtration Membrane – 1 No. in case of RO+MF

Germkill performance standard| Meets stringent international criteria for microbiologically safe drinking water – e.g. Environmental Protection Agency (EPA), USA
Ordering GKK
There are 2 Sediment Filters (SF) and 1 Germ Kill Kit (GKK) in the device that need to be replaced periodically.
SF| Needs to be changed approximately every 6 months10 from the date of installation
GKK| Needs to be replaced approximately every 1 year10 from the date of installation
Please call 1860-210-1000 for ordering your HUL Pureit GKK to ensure safe drinking water, always!

  1. 4.8~5.2 under running water conditions.

  2. Permeate flow rate and recovery are based on standard test conditions and may vary depending on input water quality, TDS, pressure and life of Filter elements.

  3. Input water quality and TDS content are important determinants of output water quality.

  4. If input pressure exceeds 30 PSI, please install a company provided pressure reducing valve at an additional cost.
    If the pressure is less than 10 PSI then you need to buy ‘Pressure enhancing pump’ at an additional cost.
    Device should not be installed in a house where input pressure is greater than 60 PSI. Post-RO Carbon Filter fitted in the device may need to be changed intermittently at extra cost in case you face smell issues.
    Technical specifications are subject to change or improvement without prior notice.

  5. In case the TDS is >1000 PPM, a company provided anti-scalant is recommended to be installed
    This has to be purchased at extra cost.

  6. This is based on standard consumption of 10 litres per day, with an input TDS of 450 PPM, 25 (degree symbol) water and 18 PSI pressure. Depending on the variation from above you may need to change the GKK / parts even before the stipulated time.

FAQs

How does Pureit RO+MF/RO+UV2 purify water?
Pureit RO+MF/RO+UV2 has a 6-stage purification process which ensures you to get water that is ‘As Safe As Boiled Water’ and also removes excess Total Dissolved Solids (TDS) to make your water tastier.

  • Stage 1st: Pre-Sediment Filter: Removes fine and coarse particulate impurities/dirt and improves the life of the Carbon Filter.
  • Stage 2nd: Pre-RO Carbon Filter: Removes chlorine and organic impurities like harmful pesticides. It also absorbs bad taste odour causing organic compounds from water.
  • Stage 3rd: Mini Filter: Filters water further to ensure removal of finer particulate impurities.
  • Stage 4th: RO Membrane: Removes dissolved salts, hardness, pesticides, fluoride and heavy metals like arsenic, lead and mercury. It also removes microbial contaminants like bacteria, virus, protozoa and cysts.
  • Stage 5th: Micro Filtration Membrane(MF)/UV2 : Micro Filtration Membrane (MF)/UV is added Post-RO, which ensures that the water is purified not once but twice.
  • Stage 6th: Post-RO Carbon Filter: Last level of purification acts as a polisher and enhances the taste of purified water.

What is the storage capacity of Pureit RO+MF/RO+UV2?
Pureit has Storage Tank capacity of upto 5 litres. The storage tank is fully automatic and well shielded and as and when you take water out of the tank, the purification process starts automatically again and refills the Storage Tank.

How much time does it take to purify water in Pureit RO+MF/RO+UV2?
Pureit can purify water up to 10-12 litres per hour depending on the device you have purchased. However, the time taken to purify depends on the life of the filters, the input water pressure, TDS and other impurities present in the water.

Does Pureit RO+MF/RO+UV2 remove arsenic, fluoride and nitrates?
Like other ions, the RO technology can also remove arsenic, fluoride and nitrates.

How will I get new consumables/membranes replaced?
You need to call the Pureit Helpline and order the consumables. The customer care specialist will visit your place and replace the consumable/Germkill Kit at a nominal cost.

What are all the consumables which are to be replaced?
You need to replace Sediment Filter approximately every 6 months from the date of installation and GKK approximately every 1 year from date of installation.

Can I drink the first purification cycle of water from the purifier?
No, recommendation is to throw the first cycle of water that is filled in the Storage Tank when the new Pureit purifier is installed and also whenever the Germkill Kit are replaced.

Can I open and service my purifier?
It is not recommended to open and service purifier by an individual. Call our Pureit Helpline if you face any issue which requires servicing and opening of the purifier.

Can I use reject water?
It is not recommended to use the reject water for any kind of human/pets consumption (drinking or cooking). It may be used for gardening or cleaning floors.

What should I do if any part of purifier is broken?
Please call the Pureit Helpline. Our technicians will visit your house and guide you on the repairs required. There will be a nominal visiting charge and you would need to buy the parts required.
What should I do if there is leakage from the purifier? First switch off the Ball Valve if you find any leakage from the purifier and turn off the power switch. Check for any visual improper fitment and then call our Pureit Helpline number and register a service request.

How long the stored water in Pureit RO+MF/RO+UV2 can be used for drinking?
You can use stored water for 2 days. If it is not used for more than 2 days we advise you to discard that water, refill and then consume.

Reach Pureit @
1860-210-1000
www.pureitwater.com

WORLD’S LARGEST SELLING PURIFIER
WORLD’S LARGEST SELLING PURIFIER

Based on Unit Shipment Sales for 2014 Point-of-use water treatment systems. Excludes pitchers and faucet mount system.
Disclaimer: All images used in this manual are illustrative and the actual product may differ.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals