HUMANTECHNIK A-2575-0 Baby monitor User Manual

: June 6, 2024
: HUMANTECHNIK

Table of Contents

HUMANTECHNIK A-2575-0 Baby monitor
Controls and display
Technical specification Baby monitor:
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

HUMANTECHNIK A-2575-0 Baby monitor

Congratulations on the purchase of your video monitoring system »mona«. You have chosen highly modern and reliable devices, which will provide valuable service for your home. Please read this manual thoroughly to be able to set up the units correctly and to familiarise yourself with all of the features the system offers.

This manual relates to the following products:

mona baby monitor A-2575-0
mona video receiver für baby monitors A-2577-0
mona Baby-Monitor-Set A-2579-0

Package contents: Baby monitor
The following items should be included:

»mona« baby monitor
rubber fastener
pedestal
power supply unit
manual*
warranty card*

Package contents: Video Receiver for baby monitors
The following items should be included:

»mona« video receiver
charger base
battery pack, rechargeable
power supply unit
manual*
warranty card*
Should any parts be missing, please immediately contact your dealer or the manufacturer directly. When purchased as baby monitor set A-2579-0, only one manual and warranty card is included.

Function
A »mona« monitoring system consists of at least one baby monitor and a »mona« video receiver. Up to four transmitters can be registered on one video receiver. When a certain sound level is reached, the baby monitor transmits a radio signal to the »mona« video receiver. The receiver indicates the signal by sound and images on its display.

Safety instructions

Before putting the devices to use, please read this manual completely and thoroughly.
Keep the manual safe, so that other users have access to it when needed.
Take great care that the baby monitor and its cable are well out of the child‘s reach.

Inserting the power pack into the video receiver

A power pack is included with the video receiver. Slide the battery compartment open and connect the power pack with the socket. Make sure that it is plugged in the right way round! Insert the power pack into the battery compartment, then slide the lid back on.

Setup of video receiver

Insert the cable of the power supply into “DC 6V” socket located on the underside of the charger base. Plug the power supply into a 230 V mains socket. Place the receiver into the charger base. Before initial operation, you should fully charge the receiver for about 15 hours. It is adviseable to place the receiver regularly into the charger base in order to charge the power pack and therefore establish interruption-free operation.

Setup of the baby monitor
Plug the power supply cable into the “DC 6V” socket located on the rear side of the device. Plug the power supply into a 230 V mains socket.The baby monitor is supplied with 2 possibilities for mounting.
ATTENTION : Make sure that the baby monitor and the electric cable are not within reach of the child! Danger of injuries and strangulation are otherwise possible.

Stand: Click the stand into the underside of the baby monitor.
Rubber fastener: With this elastic rubber fastener, the baby monitor can be strapped to various objects. Insert the baby monitor into the fastener and fix it as needed (e.g. to a railing).

Controls and display

Video receiver

Baby monitor

Video receiver display

The figures show the regular display which appears when the receiver is activated from standby mode.

A Battery charge status
B During a call
C (Irrelevant for use with baby monitor)
D Signal strength of monitor
E Zooming
F Rejecting a call
G Indicates electric connection of current baby monitor
H Number of current monitor
I Function definition for left softkey
J Function definition for right softkey

Switching the video receiver on / off

Press and hold until the video receiver switches on. To switch the video receiver off, press and hold again. Please note that the switched-on receiver will automatically enter stand-by mode after 20 seconds of the last key entry. Press any key at any time to awaken the receiver from the stand-by mode.

Registering additional baby monitors

The receiver and monitor are already registered together when purchased as a set. The following instructions are for the registration of up to

3 additional monitors:

Press any key to switch the display on. Press the menu key to enter the main menu. With the navigation keys, select “Register” and press the menu key once more to start the search procedure.
Baby monitor:
With help of a pointed object (e.g. needle or bent paper clip), press and hold the register key until the LED blinks. See the figure below for the location of the register key.
When a single prompt tone is heard, the registration of the baby monitor has been successful. If a double prompt tone is heard, the registration has failed. In this case, turn the receiver off. Disconnect the according baby monitor from the power supply and wait 30 seconds. Reconnect the power supply. Switch the receiver on again and repeat from step 1. Make sure that monitor and receiver are not too far apart.
A maximum of 4 monitors can be registered. If an attempt is made to register more than 4 door monitors, the register interface will display “Register full”.

Reseting the registration
All registered monitors can be deleted. To delete the registered monitors, press and hold the Accept key and the right key simultaneously for 5 seconds. The register interface will then display “Register deleted”.

Viewing monitor feeds
If multiple baby monitors have been registered, the receiver can toggle between the transmissions of the various baby monitors. Press and hold the Monitor key for 1 second. The video receiver will display a list of the connected monitors. With the Navigation keys, select the desired monitor. The images from the selected monitor will be displayed.

Baby monitor
The baby monitor activates when a certain sound level is detected. The video receiver sounds an alarm and and the video feed is displayed. Display of the video will automatically end after 2 minutes. The internal video feed ends automatically after 5 minutes.

Monitor night vision
The infrared LEDs of the baby monitor will automatically light the scene when the ambient light becomes too dark. This light is not visible to the child in front of the monitor.

Video receiver: Setting date and time

Press any key to switch the display on. Press the menu key to enter the main menu. With the navigation keys, select “Date & Time”. Press the left key (Select) to enter the selection.
The hours cursor blinks. Adjust the hours with the Navigation keys. With the right Navigation key, select the minutes and adjust.
Press again to enter the date setting. As described above, use to adjust the date.
Press “Save” to save the settings and return to the previous menu. The time format is 24 h and the date format is YY-MM-DD. Date and time should be set in order to correctly display the time of captured images. When replacing batteries or in case of a total discharge of the video receiver‘s power pack, date and time must be set again.

Video receiver: Setting the volume
The call volume can be adjusted in 9 levels.

During a video transmission, press the Navigation keys to adjust the volume.
If the receiver is in stand-by mode, press any key to switch the display on. Press the menu key to enter the main menu. With the navigation keys, select “Volume“, then press “Select” .The volume can be adjusted by pressing. Press “Back” to save the setting and return to the previous menu.

Video receiver: Adjusting display brightness
The display brightness can be adjusted in 9 levels.

During a video transmission, press the Navigation keys to adjust the brightness.
If the receiver is in stand-by mode, press any key to switch the display on. Press the menu key to enter the main menu. With the navigation keys, select “Brightness”, then press “Select”.
The brightness can be adjusted by pressing. Press “Back” to save the setting and return to the previous menu.

Video receiver: Toggle key tone

Press any key to switch the display on. Press the menu key to enter the main menu. With the navigation keys, select “Key tone”. Press the left key (Select) to enter the selection.
Use to enable or disable the key tone.
Press “Save” to save the settings and return to the previous menu.

Video receiver: Automatic snapshot settings

The unique snapshot function automatically records photographs when a sound activates the baby monitor. To activate the Auto Snap function, set the receiver up as follows:

Press any key to switch the display on. Press the menu key to enter the main menu. With the navigation keys, select „Auto Snap set.“. Press the right key (Select) to enter the selection.
Use keys to choose between 1 to 3 photos and „Off“ to enable or disable the function.
Press „Save“ to save the settings and return to the previous menu.

With Auto Snap on, the camera in the baby monitor will automatically take photographs when it is triggered by sound. If you have unreviewed photographs, the backlight of the Replay key will be blinking. Up to 50 photographs can be stored. When the store is full, the oldest photograph will be overwritten.

Video receiver: Setting the alert/ringtone volume
The volume of the ringtone can be adjusted in 5 levels. Number „0“ is silent and „4“ offers maximum volume.

Press any key to switch the display on. Press the menu key to enter the main menu. With the navigation keys, select „Alert volume“. This entry can be found on the third page of the main menu. Then press „Select“ .
The alert tone volume can can be adjusted by pressing up and down buttons.
Press „Back“ to save the setting and return to the previous menu.

Video receiver: Manual snapshots

You can manually save a photograph during a video feed by pressing the Manual Snap / Monitor key . Up to 50 photographs can be stored. When the store is full, the oldest photograph will be overwritten. Press “Replay” to view the photographs. Use the Navigation keys to browse. If you wish to delete a photograph, select “Delete” in the according image. When prompted “Delete?”, confirm to deleting with “Yes” or “No” to cancel the process.

Viewing and deleting photographs

Management of the stored photographs can also be handled via the main menu of video receiver. In the case of several registered monitors, the number of the monitor is displayed for the according photograph. Snapshot management is handled as follows:

Press any key to switch the display on. Press the menu key to enter the main menu. With the navigation keys, select “Snap Show”. Press the left key (Select) to enter the selection.
Use the Navigation keys to browse.
If you wish to delete a photograph, select “Delete” in the according image. When prompted „Delete?“, confirm to deleting with „Yes“ or „No“ to cancel the process.

Video receiver: Reset to factory default
In order to reset the video receiver to the factory defaults:

Press any key to switch the display on. Press the menu key to enter the main menu. With the navigation keys, select „Default set.“. Press the left key (Select) to enter the selection.
Use up button and down button to enable or disable the function.
Press „Save“ to save the setting. After resetting, the receiver will return to standby mode.
PLEASE NOTE: All custom settings and stored photographs will be lost!

Video receiver: AUX output

The charger base features an AUX outlet. It is hereby possible to connect a vibrating pad or to establish a connection with the signal systems lisa and signolux.
PLEASE NOTE: In order to use this function, the video receiver must be placed in the charger base!

Vibrating pad (A-3303-0): Plug the vibrating pad into the AUX outlet.

Connecting a Humantechnik signal system:
With the auxillary cable A-2974-0, a connection to the following transmitters can be established:

lisa RF babycry transmitter (A-2468-0)
signolux Universal Acoustic Transmitter (A-2656-0, to be connected over the doorbell input socket. Please set the receivers accordingly to display the baby-signal)

Maintenance and care
»mona« devices do not require any maintenance. If the units become dirty, simply wipe them clean with a soft, damp cloth. Never use spirits, thinners or other organic solvents. Do not set the units up where they will be exposed to full sunlight for long periods. In addition, they must be protected against excessive heat, moisture and severe mechanical shocks.
Note : These products are not protected against splash water. Do not place any containers filled with water, such as flower vases, or anything with an open flame, such as a lit candle, on or near the products. Please make sure that the batteries are not exposed to excessive heat from such as sunlight, fire or anything similar.

Warranty

The »mona« devices are very reliable products. Should a malfunction occur despite the units having been set up and operated correctly, please contact your dealer or the manufacturer directly. This warranty covers the repair of the products and returning them to you free of charge. It is recommended that you send in the product in its original packaging, so keep the packaging for the duration of the warranty period. The warranty does not apply to damage caused by incorrect handling or attempts to repair the unit by people not authorised to do so (destruction of the seal on the unit). Repairs will only be carried out under warranty if the completed warranty card is returned accompanied by a copy of the dealer‘s invoice/till receipt. Always specify the product serial number in any event.

Disposal of used electric and electronic units (applicable in the countries of the European Union and other European countries with a separate collection system). The symbol on the product or the packaging indicates that this product is not to be handled as ordinary household waste but has to be returned to a collecting point for the recycling of electric and electronic units. You protect the environment and health of your fellow men by the correct disposal of this products. Environment and health are endangered by a faulty disposal. Material recycling helps to reduce the consumption of raw material. You will receive further information on the recycling of this product from your local community, your communal disposal company or your local dealer.

Technical specification Baby monitor:

Transmission frequency: 2,400 GHz – 2,4835 GHz
Maximum transmission power: <10 mW
Data transmission rate: 2,0 Mbps
Transmitting power: 19dBm (TYP)
Demodulation type: GFSK
Transmission range: 50 m
Video-Sensor: 1/4“ Colour CMOS
Resolution: 320 x 240 px
Image processing: Motion JPEG
Transmission rate: 25fps
White Balance: automatic
Lens: 2.1mm/F2.6mm
Viewing angle: 135°
Power consumption: 500 mA (Max.)
Operating temperature: -30°C – 40°C
Operating humidity: 0% – 85% R/H

Technical specification Video receiver:

Transmission frequency: 2,400 GHz – 2,4835 GHz.
Data transmission rate: 2,0 Mbps
Receiving sensitivity: -90dBm
Demodulation type: GFSK
Resolution: 320 x 240 (RGB)
Transmitting power: 19dBm (TYP)
Power consumption: 400 mA
Operating temperature: -10°C – 40°C
Operating humidity: 0% – 85% R/H

These devices comply to the following EC standards:

2011 / 65 / EC RoHS-Directive
2012 / 19 / EC WEEE-Directive
2014 / 53 / EC RED-Directive

Compliance with the directives listed above is confirmed by the CE seal on the device. CE compliance declarations are available on the Internet at www.humantechnik.com within the „service“ section. Technical specifications subject to change without prior notice.