HUMANTECHNIK a24140 Lisa RF Flash Lamp Instruction Manual
- June 6, 2024
- HUMANTECHNIK
Table of Contents
Operating Instructions
RF flash lamp
Congratulations on purchasing your cordless RF flash lamp. We hope it will
provide you with many years of service. You have chosen a modern and reliable
system.
Please read through the operating instructions carefully to be able to start
the unit correctly and to familiarise yourself with all of the features of the
system.
Standard components
Please check if all the following components are included:
– RF flash lamp
– Operating instructions
– Warranty card
If any parts are missing please immediately contact your dealer or the
manufacturer directly.
Functional principle
The RF flash lamp receives signals from various transmitters and converts them into light signals. The RF flash lamp has a powerful flash tube that alerts you to a signal and LEDs displaying the type of signal being received.
Setting up the system
Setting up the correct radio channel
A special digital transmission process ensures that the signals are picked up without any errors. This process also enables 10 different radio channels to be set. The default setting for the cordless RF flash lamp is channel 0. It is only necessary to set units to other channels if you have several different users operating units in the same building. Using a small screwdriver, you can set the channel number you would like to use.
Installing the cordless RF flash lamp
The various transmission signals are onverted into different sequences of flashes and signal displays by the cordless RF flash lamp:
Telephone: Telephone LED lights
flashing sequence
Doorbell I: Doorbell LED lights
flashing sequence 
Doorbell II: Doorbell LED flash
flashing sequence 
Babymonitor: Babymonitor LED lights
flashing sequence 
Person call: Person call LED lights
flashing sequence
Alarm : All LEDs flash
flashing sequence 
Water alarm: The water alarm LED lights
flashing sequence 
Fire alarm: Fire alarm LED lights
flashing sequence 
P12 pause 1,2 seconds
P14 pause 1,4 seconds
P20 pause 2,0 seconds
B flash
P30 pause 3,0 seconds
P35 pause 3,5 seconds
P40 pause 4,0 seconds
W repeat
The indicator LEDs remain on for 40 seconds.
Important note
All Lisa devices connected to the mains supply have a low power consumption
which may lead to the device feeling warm. This is normal and does not
interfere with the normal function of the devices. High and low voltage spikes
(e.g. during a thunderstorm) can occur on the mains supply. The list devices
have an integrated electronic controller which may stop working after these
conditions. If this happens simply unplug each of the devices and plug them in
again.
As a precaution remove all devices from their sockets during a thunderstorm.
Maintenance and care
All Lisa devices are maintenance-free. If the unit does become dirty, simply
wipe it clean with a soft, damp cloth.
Note: remove the RF flash lamp from the main socket! Never use spirits,
thinners, or other organic solvents. Please do not expose Lisa’s devices to
direct sunlight for a long time and please protect them from excessive heat,
moisture, and severe mechanical shocks.
Note: This product is not protected against splash water. Do not place any containers filled with water, such as flower vases, or anything with an open flame, such as a lit candle, on or near the product.
Warranty
All Lisa devices are very reliable products. Should a malfunction occur
despite the unit having been set up and operated correctly, please contact
your dealer or the manufacturer directly.
This warranty covers the repair of the product and returning it to you free of
charge. It is recommended that you send in the product in its original
packaging, so keep the packaging for the duration of the warranty period.
The warranty does not apply to damage caused by incorrect handling or attempts
to repair the unit by people not authorized to do so (destruction of the seal
on the unit). Repairs will only be carried out under warranty if the completed
warranty card is returned accompanied by a copy of the dealer’s invoice/till
receipt.
Always specify the product number in any event.
Disposal of used electric and electronic units (applicable in the countries of the European Union and other European countries with a separate collection system). The symbol on the product or the packaging indicates that this product is not to be handled as ordinary household waste but has to be returned to a collecting point for the recycling of electric and electronic units.
You protect the environment and health of your fellow men by the correct disposal of these products. Environment and health are endangered by faulty disposal. Material recycling helps to reduce the consumption of raw materials. You will receive further information on the recycling of this product from your local community, your communal disposal company, or your local dealer.
Technical data
Power supply:
Power consumption.:
Frequency:
Height::
Width:
Depth:
Weight:| 230 V, 50 Hz,
approx. 1 W
868,35 MHz
121 mm
65 mm
35 mm
215 g
---|---
This device satisfies the following EC directives:
2011 / 65 / EC RoHS-directive
2012 / 19 / EC WEEE-directive
2014 / 53 / EC RED-directive
Compliance with the directives listed above is confirmed by the CE seal on the
device. CE compliance declarations are available on the Internet at
http://www.humantechnik.com/service
Technical specifications are subject to change without notice.
Sarabec Ltd
15 High Force Road
GB-Middlesbrough TS2 1RH
Tel.: +44 (0) 16 42/ 24 77 89
Fax.: +44 (0) 16 42/ 23 08 27
E-mail: [email protected]
For other service-partners in Europe please contact:
Humantechnik Germany
Tel.: +49 (0) 76 21/ 9 56 89-0
Fax.: +49 (0) 76 21/ 9 56 89-70
Internet: www.humantechnik.com
e-mail: [email protected]