HUMANTECHNIK Signolux Plug-in Receiver User Manual

: October 30, 2023
: HUMANTECHNIK

Table of Contents

HUMANTECHNIK Signolux Plug-in Receiver
Product Information: Blitzlampe
Product Usage Instructions: Blitzlampe
Product Instruction
Package contents
Function
Signals and controls
Special accessories
Transmission range
Signal distinction
Maintenance and care
Warranty
Technical data
Humantechnik Service-Partner
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

HUMANTECHNIK Signolux Plug-in Receiver

Product Information: Blitzlampe

The Blitzlampe is a portable radio receiver that can be used to receive signals from various sources such as vibrating pillows, flash modules, and acoustic modules. It has six indicator-LEDs that light up for 40 seconds after an incoming signal. The receiver also has a transmitter battery status indicator that informs about the
state of the batteries of the transmitters. The Blitzlampe operates at a frequency of 868,425 MHz and has a weight of 215 g. It comes with a user manual and warranty card.

Product Usage Instructions: Blitzlampe

To use the Blitzlampe, follow the instructions provided in the user manual:

Check if all components are included in the package, including the manual and warranty card.
Program signals and assign them to the symbols using the function button:
- Press and hold the function button for some time until the begin to light up in sequence.
- Release the function button as soon as the desired symbol is lit.
Wait for about 20 seconds and test the function.
To remove transmitters assigned to an indicator symbol, use the delete button.
Maintain and clean the Blitzlampe regularly to ensure its proper functioning.

Please note that in case any parts are missing, immediately contact your dealer or the manufacturer directly. The Blitzlampe operates at a frequency of 868,425 MHz and has a weight of 215 g. It comes with a user manual and warranty card.

Product Instruction

Congratulations on purchasing your »signolux plug-in receiver«. We hope it will give you many years of reassuring operation.
You have purchased a modern and reliable system.
Please read these operating instructions carefully. They tell you how to set up the system correctly and explain all the system’s features.

Package contents

Please check if all of the following components are included:

signolux plug-in receiver«
manual
warranty card

If any parts are missing, please immediately contact your dealer or the manufacturer directly.

Function

The »signolux plug-in receiver« is a receiver for the signals of the various »signolux« transmitters and indicates these as visible flashing light signals.
6 indicator LEDs with symbols help to distinguish the signal source.

Signals and controls

Indicator-LEDs:
The 6 indicator-LEDs help to distinguish between the various signal sources. They light up for 40 seconds after an incoming signal.
Transmitter battery status in-dicator:
The receiver informs about the state of the batteries of the transmitters:

A low battery level of a transmitter is indicated by the red control lamp shining together with the symbol of the according transmitter when it’s signal is triggered.
Please replace the batteries of the according transmitter as soon as possible.

Function button:
When the »signolux plug-in receiver« is flashing, you can cancel the signal by pressing the function button.
Press it again to recall the last received signal.
The function button is also used to program the receiver (see section 2 „Programming signals“).

Delete button:
This button serves to remove transmitters assigned to an indicator symbol (see section 3 „Deleting transmitters from receiver memory“).

Setting up the system

Connect the device
Plug the »signolux plug-in recei-ver« into a well visible mains socket.
The indicator LEDs light up once and the device is ready to use.
The »signolux plug-in receiver« is not waterproof. Therefore it is not advisable to use it in the open.
Programming signals and assignment to the symbols
A transmitter (e.g. doorbell push-button) can be assigned to each symbol. This assignment can be adapted by programming. Up to 8 transmitters can be as- signed to each symbol. Please keep in mind that a transmitter can only be assigned if it is not yet known in the memory of the signolux plug-in receiver«. If re-quired, you might first have to delete the transmitter from the memory (see section 3.)
Keep the function button pressed for some time. The symbols begin to light up in sequence. Let go of the fun-ction button as soon as the desired symbol is lit. (e. g. doorbell symbol)
Trigger the signal of the transmitter you want to as-sign to the lit up symbol. (e.g. operate the doorbell button).
Wait for about 20 seconds and test the function.
Deleting transmitters from receiver memory
If you wish to remove the transmit-ters assigned to a symbol from the receiver memory:
Keep the function button pressed for a few seconds. The symbols begin to light up in sequence. Let go of the function button as soon as the desired symbol is lit.
Now press the function but-ton and the delete button at the same time. All symbols will briefly light up.
Please note that this will dele-te all transmitters assigned to the according symbol.

Checking the last signal, can-celling the current signal
By pressing the function button, the last registered signal can be displayed again.
You can also cancel a signal that was just activated by pressing this button.

Special accessories

The following modules (not included) can be plugged into to the AUX output connector:

Vibrating pillow (A-3303-0)
Flash module MF-1 (A-3320-0)
Acoustic module MA-1 (A-3340-0)

Transmission range

The signal range of the »signolux« transmitters can be up to 200 metres under ideal conditions. The following conditions may result in a reduced range:

Buildings or vegetation.
Interference from TVs, computer monitors and mobile phones. Under certain circumstances, this may prevent the receiver from functioning at all.
Positioning of the transmitter at an unfavorable distance from surfaces which reflect radio waves, for example floors and walls. This may lead to the signal wave being weakened or even cancelled out by the reflected wave.
Metallic objects reduce the range due to the shielding effect of the metal.
Particularly in towns and cities, there may be many other sources of radio waves which can dis rupt the original signal.
Having units operating at similar frequencies located close to one another may also result in mutual interference.

Signal distinction

HUMANTECHNIK-Signolux-Plug-in-Receiver-3

Maintenance and care

All »signolux« devices do not require any maintenance. If the unit does become dirty, simply wipe it clean with a soft, damp cloth.
Never use spirits, thinners or other organic solvents. Do not expose the devices to full sunlight for long periods.
In addition, they must be pro-tected against excessive heat, moisture and severe mechani-cal shocks.

Note:
This product is not protected against splash water. Do not place any containers filled with water, such as flower vases, or anything with an open flame, such as a lit candle, above or near the product.

Warranty

The »signolux Plug-In receiver« is a very reliable product. Should a malfunction occur despite the unit having been set up and operated correctly, please contact your dealer or the manufacturer directly.
This warranty covers the repair of the product and returning it to you free of charge. It is recommended that you send in the product in its original packaging, so keep the packaging for the duration of the warranty period.
The warranty does not apply to damage caused by incorrect handling or attempts to repair the unit by unauthorized per-sons (destruction of the seal on the unit).
Repairs will only be carried out under warranty if the completed warranty card is returned accompanied by a copy of the dealer’s invoice/till receipt.
Always specify the product serial number in any event.

Disposal of used electric and electronic units (applicable in the countries of the European Union and other European countries with a separate collection system). The symbol on the product or the packaging indicates that this pro- duct is not to be handled as ordinary household waste but has to be returned to a collecting point for the recycling of electric and electronic units. You protect the environment and health of your fellow men by the correct disposal of this products.
Environment and health are endangered by a faulty disposal. Material recycling helps to reduce the consumption of raw material. You will receive further information on the recycling of this product from your local community, your communal disposal company or your local dealer.
Hereby, Sarabec Ltd declares that this device complies with all relevant UK statutory Instruments.
The full declarations of conformity for this device are available from Sarabec Ltd., 15 High Force Road, MIDDLESBROUGH TS2 1RH. UK.

Sarabec’s EU authorised representative:
HUMANTECHNIK GmbH, Im Wörth 25, D-79576 Weil am Rhein, Germany

This device complies with the following EC directives:

2011 / 65 / EC + 2015 / 863 / EC RoHS directive
2012 / 19 / EC WEEE directive
2014 / 53 / EC RED directive

Compliance with the directives listed above is confirmed by the CE seal on the device. CE compliance declarations are available on the Internet at www.humantechnik.com.

Technical data

Power supply: 230 V, 50 Hz
Energy consumption: approx.1 W
Transmission frequency: 868,425 MHz
Height: 121 mm
Width: 65 mm
Length: 35 mm
Weight: 215 g

Technical specifications subject to change without prior notice.

For other service-partners in Europe please contact:
Humantechnik Germany
Tel.: +49 (0) 76 21/ 9 56 89-0
Fax: +49 (0) 76 21/ 9 56 89-70
Internet: www.humantechnik.com
e-mail: info@humantechnik.com

RM264400 · 2022-06
A-2644-0 / A-2644-W