ANKER 318A6610Z2 Soundcore Sleep A10 User Manual

sound core Sleep A10
USER MANUAL

APP

Download the sound core app to customize controls, listen to soothing sounds, manage your sleep, update firmware, and explore more.
If your earbuds cannot connect with the sound core app, update it to the latest version in your mobile app store.
WEARING

Choose the ear tips and ear wings that fit your ears best.
Twist the earbuds until the ear wings are wedged against the ridge of your ears.

CHARGING

1. Place the earbuds in the charging case and close it.
   • Fully dry off the earbuds and the USB charging port before charging.

2. Connect the charging case to the power supply by using an original or certified USB-C charging cable.
   • It is recommended that you charge the earbuds with a 5V charger (not included).
   • Fully charge both the earbuds and the charging case before the first use.

POWERING ON & PAIRING

Open the charging case, the earbuds will automatically power on and enter pairing mode.
Select “sound core Sleep A10” on your device’s Bluetooth list to connect.

RE-PAIRING

Pairing with another device: Place the earbuds in the charging case and leave the case open. Press and hold the button on the case for 3 seconds to enter pairing mode.

SELECTING LISTENING MODE

You can switch between Music Mode and Sleep Mode via the sound core app or by tapping the left earbud twice.

• Music Mode: Play soothing sounds from sound core app, or connect to your favorite apps for more audio content.
• Sleep Mode: Listen to the soothing sounds downloaded onto your earbuds without having to interact with apps.

SMART VOLUME CONTROL

Sleep A10 adopts noise masking instead of noise cancelling. Noise masking covers up noise with selected sounds, while noise cancelling offsets noise using sound waves.

You can enable Smart Volume Control to adjust volume automatically depending on the noise levels. This feature is only available in Sleep Mode.

SLEEP DETECTION

• Sleep Monitoring: The earbuds can monitor your sleep and provide a sleep quality report.
• Smart Switch: Enable this feature to automatically switch to Sleep Mode when you fall asleep.

CONTROLS

You can customize more controls in the sound core app.
Please note that Sleep A10 does not have a touchpad so you need to double-tap with a bit of force for it to recognize the command.

| Switch listening modes (Music Mode / Sleep Mode)| Tap twice firmly (L)
---|---|---
| Play / Pause| Tap twice firmly (R)

POWERING OFF

To power off, place the earbuds in the charging case and close it.
The earbuds will automatically power off after 10 minutes if they are not connected. The duration can be set in the sound core app.

RESET

Reset if the earbuds have issues pairing with each other or with other devices.
Delete the pairing history from your Bluetooth device first. Place the earbuds in the charging case and leave the case open. Press and hold the button on the charging case for 10 seconds until the LED indicators rapidly flash white 3 times.

LED LIGHT GUIDE

| Flashing white rapidly
---|---
| Flashing white slowly
| Steady white
| Light off

FIRMWARE UPDATE

You will be informed once the new version of firmware is detected when you connect the earbuds with the app. Ensure the earbuds are placed in the charging case and the case remains open until the firmware update is completed. During the update, ensure the earbuds are being charged and avoid any usage.
SPECS
Specifications are subject to change without notice.

Phone call function is not supported on sound core Sleep A10. Please use your mobile phone to answer a call.

sound core Sleep A10
Quick Start Guide

SUPPORT

Please visit www.soundcore.com/support for more information.
APP

Download the sound core app to customize controls, listen to soothing sounds, manage your sleep, update firmware, and explore more.
WEARING

Choose the ear tips and ear wings that fit your ears best.
Twist the earbuds until the ear wings are wedged against the ridge of your ears.
CHARGING

Fully dry off the earbuds and the USB charging port before charging.

Use an original or a certified USB-C charging cable to prevent any damage. It is recommended to charge the earbuds with a 5V charger (not included).
POWERING ON & PAIRING

Open the charging case, the earbuds will automatically power on and enter pairing mode. Select “sound core Sleep A10” on your device’s Bluetooth list to connect.
RE-PAIRING

Pairing with another device: Place the earbuds in the charging case and leave the case open. Press and hold the button on the case for 3 seconds to enter pairing mode.
SELECTING LISTENING MODE

You can switch between Music Mode and Sleep Mode via the sound core app or by tapping the left earbud twice.
– Music Mode: Play soothing sounds from sound core app, or connect to your favorite apps for more audio content.

– Sleep Mode: Listen to the soothing sound downloaded onto your earbuds without having to interact with apps.
SMART VOLUME CONTROL

SLEEP DETECTION

Sleep Monitoring: The earbuds can monitor your sleep and provide a sleep quality report.

Smart Switch: Enable this feature to automatically switch to Sleep Mode when you fall asleep.
CONTROLS

x2: Tap twice firmly
Please note that Sleep A10 does not have a touchpad so you need to double-tap with a bit of force for it to recognize the command.
Customize more controls in the sound core app.
POWERING OFF

To power off, place the earbuds in the charging case and close it.
RESET

Place the earbuds in the charging case and leave the case open. Press and hold the button on the charging case for 10 seconds until the LED indicators rapidly flash white 3 times.
Customer Service
24-month limited warranty
Lifetime technical support
Our warranty is additional to the legal rights consumers have buying this product.
service@soundcore.com
+1 (800) 988 7973 (US/Canada)
+44 (0) 1604 936200 (UK)
+49(0)69 9579 7960 (DE)
Input: 5V 0.5A
Playtime (varies by volume level and content):
Music mode: Up to 6 hours (Total 47 hours with charging case)
Sleep mode: Up to 10 hours (Total 80 hours with charging case)
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Songkok, Kowloon, Hong Kong
The following importer is the responsible party (contract for EU and UK matters)
Anker Technology (UK) Limited
GNR8, 49 Clarendon Road, Watford, Hertfordshire, WD17 1HP, United Kingdom
Anker Innovations Deutschland GmbH
Georg-Much-Strasse 3, 80807 Munich, Germany

The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Anker Innovations Limited is under license. Other trademarks and trade names are those of their respective owners.

FCC ID: 2AOKB-A6610L
IC: 23451-A6610L
210-192749| FCC ID: 2AOKB-A6610R
IC: 23451-A6610R
210-192758
---|---

Phone call function is not supported on sound core Sleep A10. Please use your mobile phone to answer a call.
– soundcore Sleep A10 adopts noise masking instead of noise cancelling.
Noise masking covers up noise with selected sounds, while noise cancelling offsets noise using sound waves.
For FAQs and more information, please visit : soundcore.com/support
Model: A6610, A6610L, A6610R 51005003494 V02
https://rainbowbridge.anker.com/qrscan?key=soundcore

Features

Smart Switch

1. When turned on, the earbuds will automatically switch to Sleep Mode when they detect you have fallen asleep, and the music will turn off.
2. Double tap “R” to turn on music, or double tap “L” to switch to Music Mode.

Volume Adjustment
In Sleep Mode, the volume can only be adjusted in the app.
Smart Volume Control

1. Make sure the earbuds are paired with the app to use.
2. Smart Volume Control is only available in Sleep Mode.

Choosing the most suitable ear tips and wings for optimal performance:

1. Wearing the earbuds incorrectly may cause connection issues.
2. We recommend that you start with size M ear tips and ear wings.
3. If the earbuds are too deep in your ears, it will affect the Bluetooth connection- so if you’re experiencing connection issues, replace the ear tips and wings with larger ones.

How to Solve: Use larger ear tips

How to Solve: Rotate the left earbud clockwise and the right earbud anti- clockwise

Important Safety Instructions

• Avoid dropping.
• Do not disassemble.
• Avoid extreme temperatures.
• Use original or certified cables.
• Do not wear the product while charging.
• Do not use any corrosive cleaner or oil to clean.
• Do not use the product outdoors during thunderstorms.
• Keep out of the reach of children. The product contains small parts which may be a choking hazard.
• The battery shall not be exposed to excessive heat such as sunshine, fire or the like.
• Do not use the product in environments with too high or too low temperatures, and never expose the product to strong sunshine or very wet environments.
• Ensure there is no liquid, sweat or water on the charging port when charging.
• Refer to your user manual for your earphones’ waterproof level and follow the corresponding instructions.
  o For IPX4: Do not expose earphones to dripping or splashing water.
  o For IPX4, IPXS, and IPX6: Do not submerge earphones in water .

Hearing Safety

• To avoid hearing damage, do not listen for extended periods at high volume.
• Do not turn the volume so high that you’re unable to hear your surroundings.
• Do not use earphones while driving.
• You should use caution or temporarily discontinue use in potentially hazardous situations.

The product generates stronger permanent magnetic fields that could cause interference with cardiac pcemakers, 1implanted defibrillators (!CDs) and other implants. Always maintain a distance of at least 3_94•110 cm between the product
component containing the magnet (earbuds and charging case) and the cardiac pacemaker, implanted defibrillator, or other implant.
Notice
This product complies with the radio interference requirements of the European Community.

Declarant on of Conformity
Hereby, Anker Innovations Limited declares that this product is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.soundcore.com.
This product complies with the radio interference requirements of the United Kingdom.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this product is in compliance with Radio Equipment Regulations 2017. The full text of the UK declaration of conformity is available at the following internet address: https://www.soundcore.com.
Maximum output power: 9.0dBm
Frequency band: 2.4G band (2.402GHz-2.480GHz)
This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Follow local rules and never dispose of the product and rechargeable batteries with normal household waste. Correct disposal of old products and rechargeable batteries helps prevent negative consequences for the environment and human health.
This symbol indicates ·separate collection• for all batteries and accumulators. Danger of explosion if battery is incorrectly replaced. To reduce risk of fire, explosion or leakage of flammable liquid/gas, don’t disassemble, crush, puncture, short external contacts, expose to temperature above 60°C ( 140°F), sunshine or like, expose to extremely low air pressure or dispose of in fire or water. Replace only with specified batteries.
High or low extreme temperatures that a battery can be subjected to during use, storage or transportation:

• During use: maximum 40°C (104°F)
• Storage: -20 – 45°C (-4 – 113°F)
• Transportation: 5 – 35°C (41 – 95°F)

FCC Statement
This product complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/lV technician for help.

Radiation Exposure Statement
The highest SAR value reported under this standard during product certification for use next to the head with the minimum separation distance of 0mm. This transmitter must not be collocated or operating in conjunction with any other antenna or transmitter.
The following importer is the responsible party.
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone: +1(800)9887973
IC NOTICE TO CANADIAN USERS
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

CAN ICES-003 (B)/NMB-003 (8)
This Class B digital apparatus complies with Canadian ICES-003.
Radiation Exposure Statement
This EUT is compliance with SAR for general population/uncontrolled exposure limits in IC RSS-102 and had been tested in accordance with the measurement methods and procedures specified in IEEE 1528 and IEC 62209. This equipment should be installed and operated with minimum distance 0mm between the radiator and your head This device and its antenna{s) must not be co-located or operating in conjunction with any other antenna or transmitter.
* Additional Legal Rights for Consumers
For consumers, who are covered by consumer protection laws or regulations in their country of purchase or, 1f different, their country of residence. the benefits conferred by sound core’s Limited Warranty are in addition to all rights and remedies conveyed by such consumer protection laws and regulations, including but not limited to these additional rights.
For FAQs and more information, please visit https://www.soundcore.com

HPS01
51005003533 V2
Ricotta Carta

References

• Soundcore EN
• Soundcore EN
• soundcore Headphones & Speakers - Hear it, Feel it - soundcore US

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>