TONMiND Audio Manager Software User Manual
- June 3, 2024
- TONMIND
Table of Contents
TONMiND Audio Manager Software
Introduction
About Tonmind Audio Manager
Tonmind Audio Manager is an audio broadcast software based on IP multicast. It
adopted to be used in LAN and supports auto scan batch setting of Tonmind IP
Speaker and SIP Paging Adapter. It is able to play various audio sources from
SIP call, live radio, local media player, universal windows media player (for
example, Spotify, iTunes, VLC, etc. ) via RTP Multicast. Users can easily set
and control zones, contents, rings, volume and scheduling, especially used in
school, retail or commercial centers.
System Options Setting
After clicking to start the system, then going into the page as below , click on the option for setting.
- General: Language(English/Chinese).
- Network: Check the IP address and SIP port.
- About: Check system version, contact information and authorized license.
Installation Guide
Scan Device
Click scan device, all IP speakers connected to the Internet will show as
follows, and you can name the IP speaker after enter device name.
SIP Setting
One device has two SIP accounts to register in IP PBX or other SIP server.
RTP Multicast IP
There are 10 RTP addresses can be received for each device, please note that:
port numbers do not use continuous numbers when setting the same RTP
addresses. Use discontinuous numbers. eg:
239.255.0.1:6000，239.255.0.1:6001，239.255.0.1:6002（×）
239.255.0.1:6000，239.255.0.1:6002，239.255.0.1:6004 (√)
- Multicast address ranges: 224.0.0.0-239.255.255.
- Port range: 1500-6300.
Firmware Version
How to upgrade Tonmind IP speaker’s firmware version in AM system.
- Click firmware version No..
- Down load the latest firmware version from www.tonmind.com or contact Tonmind sales.
- Select the latest version firmware CS20-xxx-APP.bin.
- Click upgrade to refresh, it would require about 20s.
Volume
Setting output& input volume, it is able for one by one or bulk setting. Click
to locate the speakers. After set, click the to check the volume.
System Restore
Account and password setting, Tonmind speakers and device factory setting is account: admin and password: tm1234.
- Click , it will return to factory setting.
System RTP Multicast
Zone Setting
Click RTP multicast for zones setting, for adding zones and for setting
saving.
- Name: A name to identify the zone.
- Multicast IP: RTP IP address for manage audio streams for the speakers and other device.
- Audio Codec: four options to be MP3, G722, PCMU, PCMA.
Schedule Setting
Click scheduler and choose enable scheduler for setting, there are four
kind of cycle period to be once only, daily, weekly and monthly. For each time
event, it is able for setting when to start or stop.
SIP Trunk Setting in Zone
- Press SIP trunk and enable SIP.
- Register a SIP account from a SIP sever, like PA system or IP PBX.
- Save the setting, then you can make phone call as a audio stream to the speakers and other device of the zone.
Audio Stream
Audio media: Local resources, you could add like MP3 docs to the system.
Audio source: There are two ways, one is live microphone in, you can announce directly in PC or a connected microphone. And the other one is the system could detect the signal from outside music player like spotify and then auto playing.
Live radio: put a live radio address and press start button, then the real-time radio is able be played.
Bell ringing: there are 28 options build in, you can also customize your own and select from PC or connected device.
Repeat type:
- Once only: one time playing.
- Duration: unit seconds, for example if the audio is 2s and set 5s , so total is 2.5 cycle.
- Times: audio cycle times, for example if the audio is 2s and play 3 times, so total is 6s.
How to Get License Key
- Enter option-”about”.
- Copy the machine code to us by e-mail: sales@tonmind.com or contact Tonmind sales directly.
- We’ll send a license key to you after receiving machine code, active it then license works.