ZDY 5.8Ghz Wireless Carplay Adapter User Manual

ZDY 5.8Ghz Wireless Carplay Adapter User Manual

Product Specifications:

• Voltage: 5V
• Current: 210mA
• Operating temperature: 28″-34″
• Supported temperature: -20° to 75

Contains:

• Product ‘1

• USB-A to USB-C Cable *1

• USB-C to USB-C Cable *1

• Jel pad *1

• USER MANUAL*1

Function:
Convert the original wired CarPlay to wireless CarPlay

Features:
This Adapter supports up to 60 frames per second

Bluetooth & Wifi name: DrivePlay-xxxx; Wifi password 88888888

Indicator status:

From wired CarPlay to wireless CarPlay, the indicator flashes once every 1 second

NOTE:

iphone only support CarPlay, if the adapter is in CarPlay mode (the indicator flashes every 1 second), please use iphone to connect

Indicator light:

• After the adapter is powered on, Flashes after 6 seconds, which means that the Adapter is normal.
• If the indicator light is steady on or off after 6 seconds, which means the Adapter is faulty. Please contact the seller.

1. Type-c port: Insert the Type-c of the data cable into the Type-c port of the adapter
   

2. USB port: USB upgrade port, USB disk upgrade, do not insert the phone data cable
   

3. Indicator light: Determine whether the device is working properly
   

Connection method:

CarPlay Connection:

1. Insert Adapter into the USB/Type-c port of the original vehicle and wait for the original head unit UI interface to display. After the Adapter UI interface comes out, please use the iphone to connect the Bluetooth name on the UI interface, and at the same time realize the function under the prompt and guidance of iphone
2. Insert Adapter into the original USB/TYPE-C port and wait for the original vehicle “Apple Carplay” icon to turn green (the Adapter UI not displayed) or click on the original car screen prompt Use “Apple Carplay “. At this time, please use iphone to connect to the Bluetooth name of the Adapter.

U.S Compliance

Hereby declares that this wireless device complies with Part 15 of the FCC Rules of the United States Output power listed is conducted power. This device contains 20,40 and 80 MHz signal bandwidth. the antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. except in accordance with FCC multi-transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket NO.13-49 and maybe marketed, manufactured or imported after the June 1,2016 transition deadline This device is certified pursuant to two different Part 15 rules sections

EU CE-RED Compliance

Hereby declare that this wireless device complies with the third specification of Directive 2014/53/EU he third-party certification and testing agency entrusted by the company is Anbotek. And a copy of the test report has been stored in the Annotek database

RoHs Compliance

Hereby declare that this product is fulfills the requirement of the Directive 2011/65/EU (RoHS) and amendment Commission Delegated Directive (EU) 2015/863 with effective from 22 July 2019. The third-party certification and testing agency entrusted by the company is Anbotek. And a copy of the test report has been stored in the Annotek database.

UKCA Compliance

Declare that this product meets the requirements of UKCA

Safety: BS EN IEC 62368-1:2020+A11:200 Health:BS EN IEC 62311:2020;BS EN 50665:2017;
EMC:ETSI EN 301 489-1 V2.2.3(2019-11); ETSI EN 301 489-3 V2.1.1 (2019-03) ETSI EN 301 489-17 V3.2.4(2020-09): ETSI EN 301 893 V2.2.1 (2017-05) Radio:ETSI EN 300 328 v2.2.2(2019-07); ETSI EN 300 440 v2.2.1 (2018-07)

Canada IC Compliance

IC: 29878-13514519

Australia ACMA Compliance

Required by the following Notices:

• Radiocommunications (Compliance Labelling-Devices) Notice 2014 made under section 182 of the Radiocommunications Act 1992
• Radiocommunications Labelling(Electromag- netic Compatibility) Notice 2008 made under section 182 of the Radiocommunications Act 1992
• Radiocommunications(Compliance labelling- Electromagnetic Radiation) Notice 2014 made under section 182 of the Radiocommunica- tions Act 1992 and
• Telecommunicatiaons (Labelling notice for Customer Equipment and Customer cabling) Instrument 2015 made under section 407 of the Telecommunicatiaons Atc 1997.

Online upgrade: Connect to the adapter WiFi, the WiFi name is DrivePlay- XXXX, the WIFI password is 88888888. In Safari browser, enter the website: 192.168.31.1 to search for and update the software. This is only applicable to iPhone. Note: Do not turn off the power during the upgrade process.

This symbol indicates that this product shall not be treated ashousehold waste. Instead it shall be handed over to theapplicable collection point for the recycling of electrical andelectronic equipment.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>