Honeywell ECS-50WBU Backup Amplifier Installation Guide
- May 15, 2024
- Honeywell
Table of Contents
Honeywell ECS-50WBU Backup Amplifier
Product Information
Specifications
- Product Name: Farenhyt Series ECS-50WBU Backup Amplifier
- Compatibility: Designed for use with ECS-DUAL50W in the 100-watt-with-backup mode for single and dual-channel setups
Product Usage Instructions
Installation and Wiring
- Remove AC power from the ECS-DUAL50W.
- Disconnect backup batteries from the ECS-DUAL50W.
- Connect one end of the supplied wiring harness (P/N 50116775-001) from the connector labeled “Backup Amplifier” on the ECS-DUAL50W to the connector on the ECS-50WBU.
- Mount the ECS-50WBU to the standoffs using the 4 supplied screws.
- Restore AC Power.
- Reconnect backup batteries.
Note: Follow the provided figure for correct installation and wiring details.
FAQ
Q: Can the ECS-50WBU be used with other amplifier models?
- A: The ECS-50WBU is specifically designed for use with the ECS-DUAL50W in the specified mode and may not be compatible with other amplifier models.
Q: What is the purpose of the backup capability provided by the ECS- 50WBU?
- A: The backup capability ensures continued operation in case of power outages or failures, maintaining uninterrupted functionality for critical systems.
Description
The ECS-50WBU provides backup capability when operating the ECS-DUAL50W in the 100-watt-with-backup mode for both single and dual-channel setups.
Compatibility
- The ECS-50WBU is compatible with the following Honeywell Farenhyt Series Fire Alarm Control Panels (FACPs).
- For more information, refer to the FACP Installation Manual or the ECS Series Manual (PN 151455).
- IFP-2100ECS
- IFP-300ECS
- IFP-2000ECS
- IFP-1000ECS
- IFP-100ECS
Installation and Wiring
The ECS-50WBU mounts on top of the ECS-DUAL50W board on the standoffs provided.
- Remove AC power from the ECS-DUAL50W.
- Disconnect backup batteries from the ECS-DUAL50W.
- Connect one end of the supplied wiring harness (P/N 50116775-001) from the connector labeled, “Backup Amplifier” on the ECS-DUAL50W to the connector on the ECS-50WBU as shown in Figure 1.
- Mount the ECS-50WBU to the standoffs using the 4 supplied screws as shown in Figure 1.
- Restore AC Power.
- Reconnect backup batteries.
Document LS10059-001SK-E:C 12/14/2021 ECN: 151770
Documents / Resources
|
Honeywell ECS-50WBU Backup
Amplifier
[pdf] Installation Guide
ECS-50WBU, ECS-50WBU Backup Amplifier, Backup Amplifier, Amplifier
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>