Leyun Innovation P2 Smart Pill Box User Manual

Leyun Innovation P2 Smart Pill Box

Know the Device

Physical Button
Press the physical button

1. Wake up the device.
2. Check battery.
3. End medication reminder.

Press and hold the physical button

1. Bluetooth pairing and binding.
2. Bluetooth unbinding.

RGB LED

• Blue LED

1. Power on (blue light flashes once).
2. Wake up (blue light flashes once).
3. Bluetooth binding is successful (blue light flashes once).
4. Bluetooth pairing (blue light flashes 60S).

• Green LED

1. Medication reminder (green light flashes 20S)
2. Battery check (battery> 20%,green light flashes 3 times).
3. Find pill box (green light flashes 3 times).

• Red LED

1. Batter check (battery< 20%,red light flashes 3 times).
2. Low battery reminder (battery 1s less than 20%, the pill box red light flashes 3 times every 2 hours).

Buzzer

1. Medication reminder,the buzzer will sound.
2. Find pill box,the buzzer will sound.

Charging
Insert the MicroUSB charging cable into the charging hole of the pillbox to charge

Downloading and Pairing

1. Download the APP
   Scan the following QR code to download “ilife+” or search for and download ilife+ in “APP Store on your phone.

2. Pairing
   Turn on the APP and Bluetooth; Press and hold the physical button of pill box, the blue light flashes; Search and select the pill box in the APP: Finally,bind the pill box in the APP.

Parameter

• Model: P2
• Battery Type: Lithium battery
• Battery Capacity: 200mAh
• Battery Life: 90 Days
• Operating Temperature: 0-60 C
• Bluetooth: V 5.0 LE

Functions

• Supporting features such as: Medication reminder, low battery reminder, medication plan, medication record, find pill box.

Safety

1. To prevent device failure, fire and explosion,never place the device in any extremely-high-temperature or extremely-low-temperature area.
2. To prevent device damage,always protect the device against strong impact or shock.
3. Do not disassemble or modify the device without authorization.Any device failure should be referred to our after-sales service personnel.

FCC Caution

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interterence to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled en vironment.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>