brondell P200-W O2 Plus Horizon Air Purifier Owner’s Manual

Owner’s Manual
HORIZON
02+ AIR PURIFIER P200

P200-W O2 Plus Horizon Air Purifier

Read this Owner’s Manual for correct installation, use, and maintenance of this product. After reading and completing installation, keep this manual in a place that is easily accessible.

SAFETY INFORMATION

(IMPORTANT SAFEGUARDS)
READ ALL INSTRUCTIONS BEFORE USING
BE CAREFUL TO KEEP THIS SAFETY INFORMATION. PLEASE READ THIS INFORMATION TO PREVENT PROPERTY LOSS AND ENSURE SAFETY.
DANGER: If not observed, serious injury or even death may occur as a result.

• Do not use a damaged power plug or plug into a loose electric outlet.
• Please connect the power plug to a grounded electrical outlet rated for 120 V ~ 60 Hz.
• Do not move the product by pulling on the power cord.
• Do not handle the product or power plug with wet hands.
• Do not forcefully bend the power cord or place heavy objects on it to prevent it from being damaged or deformed.
• Do not connect and pull out the power plug or cord repeatedly.
• If the electric outlet is wet, carefully unplug the product and let the electric outlet dry completely before subsequent use.
• Unplug the product before cleaning, repairing, inspecting, or replacing parts.
• Remove any dust or water from the power plug prior to plugging in.
• Do not plug the product into an electrical outlet or power strip that is being used by too many other products. Use an electrical outlet adequate for the wattage of the product.
• Unplug the system if it is not going to be used for a long time.
• If the power cord is damaged – do not operate the product and do not attempt to repair, modify, or replace the cord yourself. Contact the Brondell Service Center toll free at 888-542-3355 or email us through our website.
• If the product produces a strange noise, a burning smell, or emits smoke, unplug it immediately from the electrical outlet and contact Brondell. Failure to do so may result in electric shock or fire.
• Do not insert any wires or sharp objects into any product gaps. This may result in electric shock, fire, or product damage.

DANGER: If not observed, serious injury or even death may occur as a result.

• Do not place an electronic or gas heater near the product or place near heating vent.
  This may result in fire or product deformation. Do not place any containers filled with water or other liquids, food, metallic objects, or any flammable material on top of the product. If foreign material enters the product, this may result in electric shock or fire.

• Do not use the product in locations exposed to excessive moisture or rain and do not splash water onto the product. Never place the product in or near water.

• Do not use the product in areas where flammable gases or combustible materials are used or stored.

• Do not spray any flammable materials such as insecticides or air fragrances near or into the air inlet.

• Do not disassemble, repair, or modify the product yourself. If repair is needed please contact the Brondell Service Center toll free at 888-542-3355 or email us through our website.

• Clean the exterior with a damp cloth. Do not clean the product using benzene, thinner, or abrasives.

• Do not use the air cleaner in a factory or industrial setting where machine oil may be present in the air.

WARNING: To reduce the risk of fire, electric shock or injury, read and understand this user guide before operating this appliance.

• Do not insert fingers or foreign objects into the air inlet or air outlet.
• Do not let children play with the product or climb on it. Children should be supervised to ensure that they do not play with the appliance.
• When removing the front cover, exercise caution that no clothing or body parts become stuck in the top vent of the product.
• This appliance can be used by children, age 8 years and up, and persons with reduced physical or mental capabilities if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
• Cleaning and user maintenance shall not be performed by children without supervision.
• Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Do not route cord under furniture or appliances. Arrange cord away from traffic area and where it will not be tripped over.
• Lack of proper cleaning and maintenance may result in fire, electric shock, or injury.
• Unplug or disconnect the appliance from the power supply before servicing.
• This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.

CAUTION: If not observed, minor physical injury or property damage may occur as a result.

• Do not install the product on a sloped or uneven surface.
• Do not apply force or impact to the product.
• Install the product so that no obstacles block the circulation of air around the product.
• Install the air cleaner away from strong artificial lighting or direct sunlight. Do not install the air cleaner in a location exposed to direct sunlight.
• Replace the filter according to the filter replacement cycle.

PRODUCT FEATURES

Main Features

1. Control Panel – Allows user to control all functions of the Horizon (see opposite page for details).
2. Front Panel – Remove this to change the filter.
3. Air Intake – Air from the room is taken into the unit through either side of the Front Panel.
4. Air Outlet – Clean, filtered air is expelled from the unit through this grille.
5. Power Cord – Must be plugged into a polarized (grounded) outlet.
6. Handle – Allows the user to carry the Horizon from room to room as needed.

Control Panel Detail

| 1. Power Button – Touch to turn power on/off.
---|---
| 2. Air Speed Selector – Touch to select between three air speed modes: LOW, MEDIUM, HIGH.
| 3. Intelligent Ion –Touch to engage Intelligent Ion Mode.
| 4. Timer – Touch to activate the Timer Mode.
User can set the unit to stay on for 1, 2, or 4 hours.
| 5. Sleep Mode – Touch to engage Sleep Mode.

Five-Stage Air Purification
The Horizon’s composite filter combines four filtration layers plus ionization to create a five-stage filtration system.

4-In-1 Composite Filter Includes

1. Pre-Filter – Extracts large particles such as dust, hair, and lint.
2. HEPA Core – Captures mold, pollen, bacteria, allergens, and 98.45% of particles above 0.3 microns in size.
3. Granular Activated Carbon Filter – Traps odors, harmful gases, VOCs, and decomposes formaldehyde.
4. Cold Catalyst Filter – Reduces formaldehyde, benzene, xylene, ammonia, VOCs and other harmful gases.

Intelligent Ion
Horizon’s Intelligent Ion technology can be activated by pressing the Ion button on the control panel. This will prompt the unit to emit negatively charged ions into the air. These negatively charged ions attract and remove positively charged ions from the air, including irritants such as allergens, dust, and bacteria.

OPERATION

Preparing for First Use

**** Be sure to remove all plastic packaging from the filter before turning the Horizon on.

1. Remove the Front Panel by grasping both sides of the upper front cover with both hands. Pull the Front Panel away to remove it from the unit.
2. Remove all plastic packaging from the filter.
3. With the front tabs facing out, install the filter by laying its bottom edges flush against the filter cabinet then pushing the top of the filter firmly in place.
4. Re-attach the Front Panel by inserting the tabs on the bottom of the Front Panel into the slots in the bottom of the body. Then, push the top of the panel towards the unit, the Front Panel clicks securely in place.

Control Panel
**** Place the Horizon on a flat, solid surface. Do not block the Air Outlet with objects, and remove any heat sources and/or open flames near the unit.

Turning the Horizon On / Off

1. Plug the Horizon into the nearest power outlet that accepts a polarized (grounded) plug. An extension cord may be used, so long as the cord accepts a polarized (grounded) plug and is rated for a current of 120V.
   The unit will chime to indicate that power is running to the unit, but it will not power on automatically.

2. Touch the Power button at the top of the Control Panel. The Horizon will chime, the fan will come on, and a fan speed indicator light will illuminate.
   If the unit does not power on, please see our Troubleshooting section on page

4. To turn the Horizon off, press the Power button. The unit will chime and power off.

Selecting the Operating Mode

| 1. Air Speed – Touch the Air Speed Selector button to toggle between three fan speeds: LOW, MEDIUM, HIGH.
---|---
| 2. Sleep Mode – Touch the Sleep button to enter Sleep Mode. Fan speed will power down to its lowest level and all lights on the Control Panel, except the Sleep button, will turn off.
| 3. Intelligent Ion – Touch to engage Intelligent Ion mode.

Setting the Timer

1. Press the Timer button to toggle between the three preset timer durations: 1, 2, or 4 hours.
2. The current timer duration will be illuminated when the Timer button is pressed. When there are no numbers illuminated, the timer function is off.
3. Once the timer has expired, the Horizon will power off.

MAINTENANCE

Cleaning Schedule
Proper care and cleaning of the Horizon is critical to performance. The following chart shows the recommended cleaning intervals and methods for each part of the unit.

a mild, non-abrasive cleaner.
Woven Pre-Filter (blue front panel of the filter)| Every two to four weeks| Vacuum using an attachment to the vacuum hose or a handheld mini-vac.
Cold Catalyst (white rear panel of the filter)| Every two to four weeks| Vacuum using an attachment to the vacuum hose or a handheld mini-vac.
4-in-1 Filter| Every four to six months*| Replace the filter.

• Filters are effective for 3500 hours. Filter life may vary according to use and environment.
  Replace filter when performance decreases or when filter change indicator activates.

Replacement filters are available at brondell.com.

**** Always remove the protective plastic packaging before installing the filter.
All three Timer Lights will flash to indicate it’s time to change the filter and reset the filter change indicator. Follow these instructions for new filter installation:

1. Unplug the Horizon.
2. Remove the Front Panel by grasping both sides of the upper front cover with both hands. Pull the Front Panel away to remove it from the unit.
3. Using the two tabs at the top of the filter, pull the filter straight out of the filter cabinet to remove.
4. Remove all plastic packaging from the replacement filter. With the front tabs facing out, install the filter by laying its bottom edges flush against the filter cabinet then pushing the top of the filter firmly in place.
5. Re-attach the Front Panel by inserting the tabs on the bottom of the Front Panel into the slots in the bottom of the body. Then, push the top of the panel towards the unit, the Front Panel clicks securely in place.
6. Press and hold down the Speed and Timer buttons simultaneously for approximately three seconds until the machine chimes, signaling the filter change indicator has been reset.

Troubleshooting
If the air purifier appears to be operating abnormally, please review the troubleshooting tips before calling the Brondell Service Center as most issues are easily resolved with a
few simple steps. If you are unable to resolve the issue after checking the following items, please call the Service Center at 888-542-3355, Mon–Fri, 9am–5pm PST (English and Spanish spoken), or email us at support@brondell.com.

electrial outlet.
2. Power plug or cord is damaged.| 1.  Unplug the unit and plug it back into the electrical outlet.
2. Contact Brondell Customer Service.
Fan not working| 1.  Unit is not switched on.
2. Motor requires servicing.| 1.  Ensure that the unit is properly plugged into the electrical outlet.
2. Contact Brondell Customer Service.
All 3 Timer Lights are flashing| Filter needs to be changed and the filter change indicator reset.|  Refer to filter replacement instructions on page 12.
Poor Performance or not purifying at optimum capacity| 1.  Filter is due for replacement.
2. Blockage at air inlet or air outlet.
3. Plastic wrap on filter not removed.
4. Clearance around appliance is not adequate  for air ventilation.
5. Missing filter or filter was inserted incorrectly.
6. Room exceeds expected room coverage area.| 1.  Replace with new filter.
2. Contact Brondell Customer Service.
3. Remove the plastic bag and place the filter back into the unit.
4. Ensure that there is clearance of 20” on each side and 4” in the back of the appliance.
5. Ensure the filter is inserted correctly (see page 9 of this manual).
6. Room coverage area is approximately 560 square feet.

TECHNICAL INFORMATION

Product Specifications

Product Name: O2+ Horizon
Product Model: P200-W
Voltage / Frequency: 120V 60 Hz
P ower Consumption: 55 Watts
Noise Level: 37.7 – 55.43dB
Dimensions: 12.0” x 6.5” x 21.2”
Net Weight: 11 Lbs.
Warranty: 2 Year Limited
CADR: 218
Room Size: 140 Sq Feet at 4 air exchanges per hour
280 Sq Feet at 2 air exchanges per hour
560 Sq Feet at 1 air exchange per hour CONFORMS TO ULSTD. 867
This air cleaner complies with the Federal Ozone Emissions Limit.
ARB CERTIFIED

Warranty

Brondell products are backed by some of the most comprehensive warranties in the industry. Brondell warrants that the Horizon O2+ Air Purifier shall be free from defects in material and workmanship under normal use and service.
O2+ Horizon Two-year Limited Warranty 100% Coverage of defects or malfunctions of all electronic parts and labor for the entire product excluding consumable filters for the first two years from original date of purchase.

Exclusions and Limitations

1. BRONDELL warrants its products to be free from manufacturing defects under normal use and service.
   This warranty is extended only to the ORIGINAL PURCHASER.

2. BRONDELL’s obligations under this warranty are limited to repairs or replacement, at BRONDELL’s option, of products or parts found to be defective, provided that such products were properly installed and used in accordance with instructions. BRONDELL reserves the right to make such inspections as may be necessary in order to determine the cause of the defect. BRONDELL will not charge for labor or parts in connection with warranty repairs for the two years from date of purchase on all products except those that may be subject to commercial use limitations.

3. BRONDELL is not responsible for the cost of removal, return (shipping) and/or reinstallation of products.
   This warranty does NOT apply to:
   • Damage or loss which occurs during shipment.
   • Damage or loss sustained through any natural or man-made causes beyond the control of BRONDELL, including but not limited to fire, earthquake, floods, etc.
   • Damage or loss resulting from negligent or improper installation including installation of a unit in a harsh or hazardous environment.
   • Damage or loss resulting from removal, improper repair, modification of the product, or improper maintenance.
   • Damage or loss resulting from acts which are not the fault of Brondell or which the product is not specified to tolerate.

4. This warranty gives you specific legal rights. You may have other rights which vary from state to state.
   THIS WRITTEN WARRANTY IS THE ONLY WARRANTY MADE BY BRONDELL. REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY SHALL BE THE EXCLUSIVE REMEDY AVAILABLE TO THE PURCHASER.
   BRONDELL SHALL NOT BE RESPONSIBLE FOR LOSS OF USE OF THE PRODUCT OR FOR OTHER INCIDENTAL, SPECIAL, FOR CONSEQUENTIAL DAMAGES OR EXPENSES INCURRED BY THE PURCHASER OR FOR LABOR OR OTHER COSTS DUE TO INSTALLATION OR REMOVAL OR COSTS OF REPAIRS BY OTHERS, OR FOR ANY OTHER EXPENSE NOT SPECIFICALLY STATED ABOVE. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTIES, INCLUDING THAT OF MERCHANTABILITY, ARE EXPRESSLY LIMITED TO THE DURATION OF THIS WARRANTY. SOME STATES DO NOT ALLOW LIMITATIONS, SO THE ABOVE LIMITATION AND EXCLUSION MAY NOT APPLY TO YOU.

How to Obtain Service
To obtain repair service under this warranty, you must contact an authorized BRONDELL Service Center to obtain an RMA (Return Merchandise Authorization) number. Proof of purchase in the form of a copy of the original receipt must accompany the returned unit for the warranty to be valid. Take or ship the unit pre-paid to the closest Brondell authorized service center along with the RMA number and proof of purchase.
To obtain an RMA number, contact the BRONDELL Service Center at 1-888-542-3355.

Brondell, Inc.
PO Box 470085
San Francisco, CA 94147-0085
Phone: 1-888-542-3355
Email: support@brondell.com
Web: www.brondell.com
For questions, contact
Brondell Customer Service:
1-888-542-3355
Monday – Friday,
9am – 5pm PST
MANUFACTURED BY
Brondell, Inc.
PO Box 470085
San Francisco, CA 94147-0085
Made in China
Please retain receipt records for any warranty claims.
REPLACEMENT FILTER
PHZF-21

References

• Bidet Toilet Seats, Air Purifiers, Reverse Osmosis, Water Filters | Brondell
• Bidet Toilet Seats, Air Purifiers, Reverse Osmosis, Water Filters | Brondell

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>