VITEK VK100W 10 inch Tablet Instruction Manual

VITEK VK100W 10 inch Tablet

Introduction

Acknowledgments
Many thanks for you choosing this product. The product belongs to MID(Mobile Internet Device), which is a kind of mobile internet device, delicate, small and exquisite, and also portable. It is also equipped with a piece of touch LCD of high definition, which can be used to watch videos and pictures of high definition. It supports the installation of multiple application programs on office and entertainment. The fantastic operation interface will give you a brand-new user experience.
This manual systematically introduces diversified functions, using skills and matters needing attention of this MID, please read this manual carefully before using it.

Safety Notice
Before using MID, please read the information in this section, and make your children learn about the information. For more detailed information, please refer to safety instructions and matters needing attention.

•  Please don’t use MID when you are driving, for fear of hindering safe driving.
•  In medical places, please observe relevant stipulations and regulations. And in regions near the medical devices, please shut down MID.
•  Please shut down MID neighboring electronic equipment with high accuracy, otherwise, breakdown of electronic equipment may be brought about.
• Please don’t dismantle the MID and its accessories on yourself, and only the authorized agency can maintain this MID.
•  Please keep MID far away from magnetic equipment, radiation from MID will erase the information stored on the magnetic equipment.
•  Please don’t use MID in places with high temperatures and inflammable gas (such as nearby gas station).
•  Please put MID and its accessories in places beyond children’s touch, please don’t let children use MID without supervision.
•  During using of this MID, please observe related laws and regulations, and respect privacy and legitimate rights of others.
• Please strictly abide by relevant explanations in this manual when using USB data line, otherwise, MID or personal computer may be damaged.
•  Please don’t use the MID in humid environments such as bathrooms, etc., and the MID being soaked or rinsed by liquid must be avoided.

Abbreviation/term

Brief introduction to MID product

1. restart
2. Power on/off
3. volume +
4. volume –
5. Front-facing camera
6. Headphone Jack
7. SD card slot
8. Type-C
9. rear camera
10. Speaker

Introduction to accessories of MID

Packing list The following articles are included in your packing box of MID:

•  The complete machine of MID
•  Power adaptor
•  USB Cable
•  User’s manual

MID state and notice
Iconography for notificationWhen a prompt message shows on your notification panel, please click the column box and slide on the screen with your finger to open the notice list. Click the options needed to check to see detailed information. Then you may click the message box and slide upwards to close the message window. The following are iconography for icons in the status bar:

Quick start

Key function

Descriptions for key functions:

• Power key :
•  Press this key for a long time to start up
•  Under starting upstate, press this key for a long time to pop up the shutdown option
• Under starting upstate, press this key to close the screen under starting upstate or when breakdown appears, press the power key for 7 seconds to make your device enter into shutdown state
• Return key: Press this key to return the last operating step or the previous operating interface
• Homepage key Press this key to return back main function interface from any interface

Starting up and turning off
Starting press the power key for 3 seconds, you can see the starting up picture. After the system is started, the machine enters into a screen lock state, please unlock according to the direction indicator of the sliding icon on the interface.

Turning off

1. After pressing the power key for a long time, the shutdown option will pop up.
2. Click OK.

Unlocking and closing of the screen
The machine will close automatically when the screen is left unused

1. After the screen is left unused for a period of time, the machine will close the screen automatically, so as to save battery power.
2. Under the screen on state, press the power key, the screen will close immediately. Turning on under screen-off state If the screen is in off state, you can unlock the screen by pressing the power key for a short time or the return key for a long time. After opening, the screen will enter lock state, press the “lock” icon by your finger and slide upward, the screen will be unlocked.

Use of touch screen

Operating mode in MID
There are various ways to skim the main screen, menu and application program, etc. on your MID.

Click to select
When you want to use screen keyboard entry, and you want to select items on the homepage interface such as aplication program, you only use your finger to click.

Press on
If you want to unlock the available option of a certain item (such as text box or inter-linkage in the web page), or move shortcut on the homepage interface and menu of main program, only press the item.

Slide quickly or slide
Quick sliding or sliding means doing rapid vertical or horizontal drag movement by using finger on the picture.

Drag
Before you starting to drag, you must press it with your finger and impose a certain pressure, and don’t loosen the finger before draging to the wanted position.

Rotate
Aiming at most of pictures, only turn the MID in side direction, the screen direction can be shifted from cross direction to vertical direction. For example, when you input characters, watch cinema, etc.

Homepage interface
When you open the screen and you may use application program, shortcut and user-defined mode to set wallpape of your homepage interface.

Skill: in any application program, you can press homepage key to return homepage interface.

Custom homepage interface Change desktop wallpaper

1.  Press blank region on the homepage interface to pop up the menu.
2. When the menu pops up, choose source of homepage interface wallpaper you want to change.
3.  After clicking source of wallpaper, click picture you want, and then select “Set wallpaper”.

USB connection

Storage setting of MID
Before transmitting document, you must set storage mode for your MID firstly:

1. Connect MID with computer by using USB transmission line. Notice bar will show the notice prompt.
2. Click status bar, options of status bar show.
3.  Among options of status, click to choose USB connected, then click to open USB storage device.
4. At this time, USB has already been connected.

Copy the document to storage card

1. Connect MID and computer together with USB cable.
2. After setting according to storage of MID, connect with computer successfully.
3.  Open your computer, in my computer, examine content in “removable disk (x)”.
4.  Find the document you want to copy, copy it to “removable disk(x)”.
5. After completion of copying, click “safely remove hardware” in taskbar of your computer to unload.

Content of MID storage device

1. NAND FLASH storage device, space for MID to store document itself.
2. TF removable memory card.
3. The two above-mentioned storage devices both can be visited through a connection with Attention: when your MID is connected with USB cable, if you start up USB storage device, you will cannot visit the memory card through MID, if you want to visit memory card in MID, only disconnect USB cable.

Memory card
Copy the document to storage card
You can transmit document between MID and computer, such as music and picture, etc. If you want to see documents in MID, only click the file browser to look through content in the SD card.

Delete documents on the storage card of MID

1. Find the document yaou want to delete.
2.  Press the document name you need to delete, click “ ” in the upper right corner.

Removing storage card when the MID is in starting up state
If need to remove storage card under starting up state of MID, you must unload the storage card firstly, for fear of failure or damage of the storage card.

1.  Pull down the SD card settings menu and click to “ EJECT ” .
2. Open System Setting, click and select the Storage, and click the icon “ right side of the SD card to uninstall the SD card.

Connection Establishment

WIFI Connection
Your MID can be connected onto Wi-Fi network to connect the operation:

1.  On the homepage interface, swipe up to bring up the Meun settings;
2.  Click and select the System Setting;
3.  Click Wi-Fi and open wi-fi switch;
4.  After openingWi-Fi, the searched Wi-Fi network can be scanned automatically from the equipment in the windows on the right.
5.  Select the Wi-Fi network required to be connected, if the password is added, pop up the password input windows and input the corresponding password.
6.  Click “CONNECT” .

Bluetooth Connection

Functions of Bluetooth:

1.  You can exchange the files between two Bluetooth. You can exchange the files with other computers, mobile phones and pda.
2.  You can synchronously exchange pims data with mobile phones, pda and laptop to support the Bluetooth ( data of outlook E-mail address).
3.  You can You can exchange the electronic name card with mobile phones, pda and laptop to support Bluetooth.
4.  You can connect the keyboard, mouse and joystick to support the Bluetooth.

Application of Bluetooth (Figure 4-3)

1. Setting procedure of entering into Bluetooth: set -> bluetooth set, open the bluetooth equipment
2.  Name of equipment: you can randomly change the name of bluetooth for your MID by pressing Menu key.
3. Detect-ability: open this function by clicking the place for name of bluetooth, which indicates that your MID bluetooth can be searched by other bluetooth equipments, this default time for this opening is of 120 seconds.
4. Scan and look for equipment: you can detect the equipment desired to be connected by utilizing this function.
5.  Bluetooth: after employing the scan to look for the equipment, all bluetooth equipments searched by your MID can display under this function.

Communication

Camera

1. Click and select the camera;
2.  The system enters into the camera interface;
3.  Click and select the Photo button and easily take the photos;
4.  Set such functions as photo sixe, storage location, white balance and focal length regulating;
5. After completion of taking photo, there is the display for previewed minimap.

Videotape function

1.  Click the videotape icon and convert it as video recorder mode;
2.  Click and select the videotape button to take video ;
3. Set such setting functions as color effect, white balance and video quality;
4.  Click and select the stop button, end the video recording, and observe the previewed video.

Other Applications

File Management
Browse filesSlide the desktop to locate the Files browser. You can use the files browser to manage, edit and delete the files and folders, or to create sharing and FTP server to achieve resource sharing.

Cut and copy files

1. In the file browser, press and select the file you want to operate.
2. Pop up operating menus, including Select all, Move to, Copy to, Rename, etc.
3. Click Cut and Copy file or folder.
4. Click into the file or folder you want to paste, and then click the menu in the upper right corner of the screen and select Copy to .
5.  And then select the folder you want to copy to, and click Copy to Here.

Delete files

1.  In the file browser, press the file you want to delete.
2. Click “
3.  Click Delete to delete file.

Folder setup

1.  In the file browser, click on the upper right menu button to pop up the menu.
2.  Select Add new folder.
3. Click pop-up window and enter new folder name in the text box.
4. Click Create Folder to create the folder.

Quick search

1. In the toolbar of the file browser
2.  Click the Search icon “ ”.
3. Pop up the search panel and enter the keywords you need to find.
4. Click OK and the search progress bar will appear in the notification bar.
5.  When the search is completed, pop up the dialog box to confirm whether to show the results.
6. Click OK to show the search results.

Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: th.is device may not cause hannful interference, and  this device must accept any interference received, including interference that may cause undesired operation. changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digi~1l device, pursuant to Part 15 of the FCC Rules. These limits arc designed to provide reasonable protection against hannful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause hannful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can by turning the equipment off and on, the user I encouraged to try to correct the interference by one or more of the following measures.

•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•  Consult the dealer or an experienced radio/TV technician for help.

NOTE:
This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter

RF Exposure Statement
To maintain compliance with FCC’s RF exposure guidelines, This equipment should be installed and operated at a minimum distance of m the radiator your body. This device
and its antenna(s) must not be co-located or operated in conjunction with any other ancenna or transmitter.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>