JWIPC N105 Alder Lake-N Business MINI PC User Guide

: June 16, 2024
: JWIPC

Table of Contents

Package Checklist
Product Configuration
Interface
Read User Manual Online (PDF format)
Download This Manual (PDF format)

**JWIPC N105 Alder Lake-N Business MINI PC User Guide

**

Package Checklist

Thank you for choosing our products.
Before using your product, please make sure your packaging is complete, if there have been damaged or you find any shortage, please contact your dealer as soon as possible.

The Machine x 1
Simple User’s Guide x 1
Power Adapter x 1

Product Configuration

CPU|

Intel® Adler Lake-P Core™ Processors CPU, Max TSP 28W

---|---
Graphics|

Intel® Iris Xe Graphics for I/I5 CPU
Intel® UHF Graphics for i3/Electron CPU

Memory|

2 x SO-DIM DR 3200 MHz Max 64GB

Storage|

1 x M.2 2280 KEY-M, Support NAME/SATAY SAD

Ethernet|

1 x RJ45, 10/100/1000/25000Mbps

Wireless|

1 x M.2 KEY E 2230 With Pie, USB2.0, Clvi

Front IO interface|

1 x Type-C (Support PD65W Input, DP Output Display and USB 3.2)
2 x USB3.2 GEN (10Gbps)Type-A
1 x 3.5mm Combo Audio Jack–
1 x Power Button–
1 x Clear COS Button–
2 x Digital Mic (Option)

Rear IO interface|

1 x DC Jack
2 x USB 2.0 Type-A
1 x RJ45- 2 x HDMI Type-A
1 x Type-C (Support PD65W Input, DP Output Display and USB 3.2)

Left IO interface|

1 x Pennington Lock

Operating System|

WINDOW 10/WINDOWS 11/LINUX

WatchDog|

Support

Power Input|

12~19V DC IN, 2.5/5.5 DC Jack

Environment|

Operating Temperature: -5~35℃
Storage Temperature: -20℃~70℃
Operating Humidity: 10%~90%(non-condescension)
Storage Humidity: 5%~95%(non-condescension)

Dimensions|

120 x 120 x 37 mm

Interface

Front panel

**Rear panel

**

Left panel

TYPE-C: TYPE-C connector
USB3.2: USB 3.2 connector, backwards compatibility USB 3.1/2.0
Audio Jack: Headset jack
Digital Mic: Digital microphone
Clear CMOS Button: Clear CMOS Button
Power Button: Pressing the power button, the machine is turned on
DC Jack: DC power interface
USB 2.0: USB 2.0 connector, backwards compatibility USB 1.1
LAN: RJ-45 network connector
HDMI: High-definition multimedia display interface
Kensington Lock: Security lock jack

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Warning Statements:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled. This equipment shall be installed and operated with minimum distance 20cm between the radiator & body

For USA: The frequency stability of all transmission frequencies of U-II-1, U-II 2, UNI 2 and U-NII-3 meets the requirements of 47 CF FCC Particular(g), and the manufacturer declares that their transmission is maintained at Band U-II-1, U-II 2, UNI 2C and U-NII-3.