Shenzhen Cyx Industrial AK2 Mini PC User Guide
- June 6, 2024
- Shenzhen Cyx Industrial
Table of Contents
Shenzhen Cyx Industrial AK2 Mini PC
GETTING STARTED
- Begin by plugging the power cable into the power cord slot of your mini pc.
- Then,plug in your USB keyboard and mouse into the USB slots.
- Next,turn on your monitor or TV and make sure that you have connected the HDMI cable tightly and sleeted the HDMI input. (wrong input will cause NO Signal issue)
- Finally press the power button of your mini pc. This action will power up and boot your mini pc.
CUSTOMIZE YOUR WINDOWS IN INITIAL START
*MINI PC power up and shows blue LED but no display on monitor or TV?
- Make sure HDMI cable from your mini pc to your monitor or TV is tightly connected .
- Make sure your monitor or TV is selected the HDMI input.
- Change another HDMI cable or Monitor.
*If you have a 32GB version of MINI PC and no enough storage left for windows update?
- Add a Micro SD card for saving files and documents.
- Regularly delete the software distribution folder in windows directory to keep updates size use down. This folder is used for updates for windows.
- Uninstall any program or app that isn’t needed or used. Once done, there was enough space to update Windows.
*How to reset your MINI PC if you forget the user account password or want a factory reset ?(Please kindly know this action will clean all the datas and files from your PC and can not be restored)
Step 1: Click power button.then hold shift key and click on restart.
Step 2: Select troubleshoot on this screeen.
Step 3: Select reset this pc
Step 4: Select remove everything.
Slap 5: Select just remove my1iles
Step 6: The whole process wll I take up to 30 mlnutes,please wait It patiently
*How to set automatically power on after power loss?
Step 1: Power up your MINI PC and press “DEL” to enter BIOS.
Step 2: Inside BIOS menu.select the boot option to find a setting named
“automatic power on” and enable this setting.
*If you have a mini pc model support 2.5 Inch SSD/HDD but can not recognize the installed disk?
Step 1: Make sure that the new disk you added has had the partition added
otherwise Windows will not recognize the disk.
Step 2: You can use the Windows Disk Manager or any partitioning software
to do the job. Once partitioned you should be able to see it and format it
appropriately.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If not installed and used in accordance with the instructions, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device shall be used with a minimum distance of 20cm from users.