VITEK VT-1420 Mixer Instruction Manual
- May 15, 2024
- VITEK
Table of Contents
VT-1420
Mixer
Manual instruction
A production date of the item is indicated in the serial number on the technical data plate. A serial number is an eleven-unit number, with the first four figures indicating the production date. For example, serial number 0606ххххххх means that the item was manufactured in June (the sixth month) 2006.
MIXER VT-1420
The mixer is intended for mixing liquids, making sauces and desserts (whipped
cream, puddings, cocktails, mayonnaise), for kneading dough and mixing soft
products.
DESCRIPTION
- Beaters
- Dough hooks/beaters installation sockets
- Light indicator
- Attachment release button «EJECT»
- Operation mode switch «1, 2, 3, 4, 5»
- Maximal rotation speed button «TURBO»
- Body
- Dough hooks
SAFETY MEASURES
Before using the mixer, read this instruction manual carefully and keep it for
future reference.
Use the unit for intended purposes only, as specified in this manual.
Mishandling of the unit may lead to its breakage and cause harm to the user or
damage to property.
- Before switching the mixer on, make sure that voltage of the mains corresponds to unit operating voltage.
- Before using the mixer, examine the power cord closely and make sure that it is not damaged. Do not use the unit if you find any damage.
- Provide that the power cord does not contact with hot surfaces and sharp furniture edges. Avoid damaging the power cord insulation.
- Do not use the unit near heat sources and open flame.
- Use only the attachments supplied.
- Do not use the mixer for mixing hard ingredients, such as hard butter or frozen dough.
- Do not install and use the beater and the dough hook at the same time.
- Before installing the attachments, make sure that the power plug is not inserted into the mains socket.
- Before using the mixer, make sure that the attachments are installed properly and fixed.
- Do not remove or install the attachments during the unit operation.
- Remove the attachments from the mixer before cleaning them.
- Before connecting the mixer to the mains, make sure that the operation mode switch is set to the position «0» (off).
- Do not use the unit outdoors.
- Maximal continuous operation time in the speed mode 1-5 is not more than 5 minutes. In the “TURBO” mode-not more than 1 minute. Make at least a 15-20 minute break before switching the mixer on again.
- After mixer operation, switch it off, pull the power plug out of the mains socket and remove the attachments.
- Do not immerse the unit body, the power plug or the power cord into water or other liquids.
- If the unit is dropped into water, unplug it immediately, and only then take it out of the water.
- Do not touch the mixer body, the power cord and the power plug with wet hands.
- Do not block the ventilation openings on the unit body during the unit operation; this may lead to the electric motor over-heating.
- Never leave the plugged-in mixer unattended.
- Always unplug the unit before cleaning or when you are not using it.
- Never pull the power cord when disconnecting the unit from the mains; take the power plug and carefully remove it from the mains socket.
- Clean the mixer regularly.
- Do not touch the rotating attachments during the mixer operation. Do not allow hair or clothes edges get into the attachments’ rotating zone.
- Do not allow children to touch the unit body, the power cord or the power plug during operation of the unit.
- Do not leave children unattended to prevent using the unit as a toy.
- This unit is not intended for usage by children.
- During operation and breaks between operation cycles, the unit should be placed out of reach of children.
- The unit is not intended for usage by physically or mentally disabled persons (including children) or by persons lacking experience or knowledge if they are not under supervision of a person who is responsible for their safety or if they are not instructed by this person on the usage of the unit.
- For child safety reasons do not leave polyethylene bags used as packaging unattended.
Attention! Do not allow children to play with polyethylene bags or packaging film. Danger of suffocation!
- Periodically check the power cord and the power plug isolation for damages.
- If the power cord is damaged, it should be replaced by the manufacturer, a maintenance service or similar qualified personnel to avoid danger.
- Do not repair the unit by yourself. Do not disassemble the unit by yourself, if any malfunction is detected or after it has fallen, unplug the unit and contact any authorized service center at the contact addresses given in the warranty certificate and on the website www.vitek.ru.
- To avoid damages, transport the unit in original package only. • Keep the unit out of reach of children and disabled persons.
THE UNIT IS INTENDED FOR HOUSEHOLD USE ONLY, ITS COMMERCIAL USAGE AND USAGE IN PRODUCTION AREAS AND WORK SPACES ARE PROHIBITED.
BEFORE THE FIRST USE
After unit transportation or storage at low temperature keep it for at
least three hours at room temperature.
– The unit is intended for operation with AC system and 50 or 60 Hz frequency.
The unit does not need any additional settings for operating with the required
nominal frequency.
– Unpack the unit and remove any packaging materials that can prevent the unit
operation.
– Check the unit for damages; do not use it in case of damages.
– Make sure that the unit operating voltage corresponds to the voltage of your
mains.
– Wash the dough hooks (8) and the beaters (1) with warm water and neutral
detergent, rinse them and dry.
– Clean the unit body (7) with a soft, slightly damp cloth, and then wipe it
dry.
HOOKS ANS BEATERS
Dough hooks (8)
Use them for kneading yeasted dough, mixing minced meat etc.
Note: – insert the dough hooks (8) into the corresponding sockets (2).
Beaters (1)
Use the beaters (1) for beating cream and egg white, making biscuit dough,
puddings, cocktails, cream, mayonnaise, puree and sauces and for mixing liquid
products.
USING THE MIXER
– Insert the beaters (1) or the dough hooks (8) into the corresponding
attachment installation sockets (2) until clicking. Both attachments should be
fixed tightly in the mixer openings.
– Before connecting the unit to the mains, make sure that the operation mode
switch (6) is set to the position «0» (off).
– Immerse the attachments into the processing bowl with ingredients, switch
the mixer on with the switch (6) and select the desired attachment rotation
speed «1, 2, 3, 4, 5», the light indicator (3) will light up.
– After unit operation, set the switch (6) to the position «0» (off), and
unplug the unit.
– Holding the hooks (8) or the beaters (1), press the button (4) «EJECT»
and remove the attachments.
Notes:
- Do not install and use the beater (1) and the dough hook (8) at the same time.
- Do not block the ventilation openings on the mixer body during the unit operation; this may lead to the electric motor overheating.
- Maximal continuous operation time in the speed mode 1-5 is not more than 5 minutes. In the “TURBO” mode – not more than 1 minute.
- Make at least a 15-20 minute break before switching the mixer on again.
RECOMMENDATIONS ON CHOOSING OPTIMAL OPERATION MODES
The mixer has 6 speed modes «1, 2, 3, 4, 5».
– «1» – Optimal start speed for mixing dry and granular products, such as
flour.
– «2» – Optimal start speed for mixing liquids and salad dressings.
– «3» – Optimal speed for making cakes and cookie dough.
– «4» – Optimal speed for beating cream, making desserts etc.
– «5» – Optimal speed for beating eggs, creme, making sugar frosting,
cocktails, making potato mash etc.
– The button «TURBO» (5) is used for switching the maximal speed on.
CLEANING AND CARE
– Switch the unit off and unplug the power cord plug from the mains socket.
– Holding the hooks (8) or the beaters (1), press the button (4) «EJECT»
and remove the attachments.
– Wash the attachments with warm water and a neutral detergent and then dry
them.
– Clean the unit body (7) with a soft, slightly damp cloth, and then wipe it
dry.
– Do not immerse the unit body (7), the power cord and the power plug into
water or other liquids. Provide that no water gets into the mixer body.
– Use neutral detergents to remove dirt; do not use metal brushes, abrasive
detergents and solvents.
STORAGE
– Clean the unit.
– Do not wind the power cord around the unit body.
– Keep the unit out of reach of children and disabled persons.
DELIVERY SET
Mixer – 1 pc.
Beaters – 2 pcs.
Dough hooks – 2 pcs.
Manual – 1 pc.
TECHNICAL SPECIFICATIONS
Power supply: 220-240 V ~ 50/60 Hz
Rated input power: 120 W
Maximal power: 400 W
RECYCLING
For environment protection do not throw out the unit and the batteries (if
included), do not discard the unit and the batteries with usual household
waste after the service life expiration; apply to specialized centers for
further recycling.
The waste generated during the disposal of the unit is subject to mandatory
collection and consequent disposal in the prescribed manner.
For further information about recycling of this product apply to a local municipal administration, a disposal service or to the shop where you purchased this product.
The manufacturer preserves the right to change design, structure and specifications not affecting general principles of the unit operation without a preliminary notification due to which insignificant differences between the manual and product may be observed. If the user reveals such differences, please report them via e-mail info@vitek.ru for receipt of an updated manual.
Unit operating life is 3 years
Guarantee
Details regarding guarantee conditions can be obtained from the dealer from
whom the appliance was purchased. The bill of sale or receipt must be produced
when making any claim under the terms of this guarantee.
IM VT-1420.indd 1 10/29/19 3:44 PM
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>