myTEM MTSER-100-WL Radio Server User Manual

myTEM MTSER-100-WL Radio Server

INTRODUCTION

The myTEM Radio Server is a universal, Z-Wave compatible, smart home controller. It can control various devices within the Z-Wave radio network and/or myTEM Smart Home modules via CAN bus. The myTEM Radio Server is the heart of your intelligent home. You have access to the controller via the very simple, user-friendly myTEM Smart Home App or via the extremely powerful myTEM ProgTool. These access options allow you to assign suitable tasks and functions to all devices and to set them up for your needs. Depending on your needs, you can customize your home using predefined scenes or completely individually according to your wishes.

Further information can be found on our website: www.mytem- smarthome.com/web/en/downloads/

ATTENTION:
This device is not a toy. Please keep it away from children and animals! Please read the manual before attempting to install the device!
These instructions are part of the product and must remain with the end user

Warning and safety instructions
WARNING! This word indicates a hazard with a risk that, if not avoided, can result in death or serious injury. Work on the device must only be carried out by persons with the necessary training or instruction.
CAUTION! This word warns of possible damage to property.

SAFETY INSTRUCTIONS

• Operate this device only as described in the manual.
• Do not operate this device if it has obvious damage.
• This device shall not be altered, modified or opened.
• This device is intended for use in buildings in a dry, dust-free location.
• This device is intended for a flat surface or for wall mounting.

DISCLAIMER

All rights reserved. This is a translation from the original version in German.
This manual may not be reproduced in any format, either in whole or in part, nor may it be duplicated or edited by electronic, mechanical or chemical means, without the written consent of the publisher.
The manufacturer, TEM AG, is not liable for any loss or damage caused by failure to follow the instructions in this manual.
Typographical and printing errors cannot be excluded. However, the information contained in this manual is reviewed on a regular basis and any necessary corrections will be implemented in the next edition. We accept no liability for technical or typographical errors or the consequences thereof. Changes may be made without prior notice as a result of technical advances. TEM AG reserves the right to make changes to product design, layout and driver revisions without notice to its users. This version of the manual supersedes all previous versions.

Trademarks
myTEM and TEM are registered trademarks. All other product names mentioned herein may be trademarks or registered trademarks of their respective companies.

What is Z-Wave®?
Z-Wave is the international wireless protocol for communication in the smart home. Z-Wave ensures a reliable communication by reconfirming every message (two-way communication) and every mains powered node can act as a repeater for other nodes (meshed network) in case the receiver is not in direct wireless range of the transmitter. Z-Wave products from different manufacturers can be used together in a wireless network. Thus, this product with any Z-Wave product from other manufacturers can be used in a common Z-Wave wireless network.
The myTEM Radio Server is a Z-Wave device with secure communication (S2) and uses the radio frequency of 868.4 MHz. If other devices also support the same secure communication, the data is exchanged in this secure mode. Otherwise it will switch automatically to a lower level of security to maintain backward compatibility.
For more information about frequency regulations please refer to the homepage of Silicon Labs. For more information about Z-Wave technology, devices, tutorials, etc. please refer to www.z-wave.info.

Installation of the myTEM Smart Home App

The myTEM Smart Home App is available for download from the Google Play Store or the Apple App Store. Select the App and install it directly from the store to your device.

The myTEM Smart Home App
You want to control the light or the temperatures in the building easily and comfortably. You want to check whether your home is in good order and that no devices consume power unnecessarily. A quick glance at your myTEM Smart Home App is enough and it lets you take appropriate steps to change something. The myTEM Smart Home App is designed to be easy to use, to help you configure your devices and create personal “feel-good” scenes. You can also use it to monitor your power consumption and reduce it if necessary.

• The home screen presents itself as below:
• The “App setup mode” helps you to commission radio components. The required procedure is described in the wizard of the app:

Views on the myTEM Smart Home App
Under DEMO you can access a demonstration project, where the functionality of the App is presented.

• The star symbolizes the favorites view:
• The network icon shows the function view:
• The floor plan symbol shows the room view:
• Under settings you can change the myTEM App to a bright background. Example: Bright function view:

Installation of the myTEM Radio Server

CAUTION! Place your device as centrally as possible in your house or apartment.
CAUTION! When planning your system, take into account the position of all devices in relation to the radio range. This is in order to avoid weak signals and sources of interference wherever possible. Weak, subdued signals can be caused by furniture, plants and especially metal objects located between devices. Possible sources of interference are electrical devices such as a microwave or computer. In this case, keep devices at least 50 cm away from the sources of interference. Ideally, create a sketch to determine the planned locations of all your devices. Install your smart home devices with increasing distance to the myTEM Radio Server.

The default user is: admin, the password: 123

To install your myTEM Radio Server, please proceed as below:

1. Plug the power supply into a power outlet and connect it with the USB cable to the device.
2. Connect the device to your external wireless router with the supplied LAN cable.

CAUTION! To avoid tripping, install your cables barrier-free and make sure the power outlet and network devices are easily accessible.
CAUTION! If the CAN interface connection is used, it must be correctly wired (+/–) and the ground be connected (to GND). A missing ground connection can affect the communication.

Wall mounting

The device is most often placed on a horizontal surface, but it is also possible to attach the device to a wall with the enclosed wall clip. Before you start, please check in which direction you want to lead the connection cables away, i.e. downwards, upwards or horizontal.
CAUTION! If the cables should lead upwards or downwards, the wall clip must be fastened in both cases with the lettering “TOP” upwards.
CAUTION! If the cables should lead to a side, please ensure that there is sufficient distance to obstacles so that the device can still be attached to the wall clip.
CAUTION! For wall mounting you also need two dowels with Ø5.0 mm and two screws with flat heads Ø3.0 × 25 mm as fastening material (not enclosed).

• Press the wall clip in the desired orientation/position against the wall and mark the mounting holes. Alternatively, you can mark two positions vertically or horizontally with a distance of 24 mm.
• Drill at the marked positions with Ø5.0 mm, approx. 30 mm deep and then press the dowels completely in.
• Attach the wall clip with the two screws.
• Plug the device onto the wall clip and slide it until the spring clip clicks into its place.
• Connect the cables according to chapter “Installation of the myTEM Radio Server”

Parts of the Radio Server

• The LED’s show correct power up, working LAN connection and available internet.
• The function of the button is described in a separate chapter.
• USB type C connection for 5V power supply of the device.
• USB type A connector for a WLAN stick or later extensions.
• CAN interface connection for optional access to myTEM Smart Home modules.
• LAN port for integration of the device into the local LAN network, i.e. to connect onto your router.
• Micro SD slot for data recording on a Micro SD card.
• The Z-Wave radio antenna is a non-visible, integral part of the device.

Function of the button / Reset to factory default

• Press the button briefly to switch on the device from standby.
• Press the button for 5 seconds to put the device in standby mode.
• Press the button 10x within a short time to reset the device to factory settings. The power LED flashes while the factory settings are reset and the device restarts.
• CAUTION! Devices integrated via Z-Wave must be removed before the reset to factory default so they can be added to the next /a new wireless network again.
• CAUTION! Resetting to factory default deletes all user-defined settings such as user, password, embedded devices, network configuration, scenes, favorites, etc.

Technical specifications

2014/30/EU

| (LVD)

(EMC)

| 2014/53/EU

2011/65/EU

| (RED)

(RoHS)

Z-Wave hardware platform| ZM5101
Device Type| Gateway
Role Type| Central Static Controller

References

• FAQ | myTEM smart automations
• Z-Wave Europe - The leading european distributor for Smart Home products.
• Z-Wave Europe - The leading european distributor for Smart Home products.
• Z-Wave Global Regions - Silicon Labs

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>