VITEK VT-2211 W Pedicure set Instruction Manual
- June 3, 2024
- VITEK
Table of Contents
VITEK VT-2211 W Pedicure set
Instruction manual
This set is used for manicures or pedicures.
Description
-
Body
-
Battery compartment
-
Attachment rotation speed switch «0/1/2»
-
attachment/protection screen setting place
-
Protection screen
Attachments -
Large coarse roller
-
Large fine roller
-
Small coarse roller
-
Small fine roller
-
Smoothing disc
-
Cone attachment
-
Felt cone attachment
-
Thin cylindrical attachment
SAFETY MEASURES
Before using the pedicure set, read this instruction carefully. Keep these instructions for further reference. Use the unit according to its intended purpose only, as it is stated in this manual. Mishandling the unit can lead to its breakage and cause harm to the user or damage to his/her property.
Attention!
Battery leakage can cause injuries or device damage. To prevent damages,
follow the rules specified below:
-
Insert batteries strictly following the polarity;
-
Take batteries out if you are not going to use the device for a long time;
-
Do not recharge or disassemble the batteries, do not expose them to high tem-perature;
-
Replace batteries in time.
-
Do not use the unit if your skin or nails are damaged.
-
Before using the unit, consult a doctor if you have diabetes or vascular disease.
-
To ensure proper operation of the unit, it is recommended to switch it off for 15 minutes after every 20 minutes of continuous operation.
-
Do not use the unit near heat sources or open flame.
-
Do not immerse the unit body into water or other liquids.
Do not use the unit while taking a bath or a shower. Do not place or keep the unit in places where it can fall into a bath or sink filled with water. -
Use only the attachments supplied.
-
Do not leave the operating unit unattended.
-
Unplug the unit before cleaning, changing the attachments or when you do not use it.
-
Clean the unit regularly.
-
Do not allow children to touch the unit’s body during the operation.
-
This unit is not intended for usage by children under 8 years of age.
-
This unit is not intended for usage by people (including children over 8) with physical, neural, or mental disorders or with insufficient experience or knowledge. Such persons can use this unit only if they are under the supervision of a person who is responsible for their safety and if they are given all the necessary and understandable instructions concerning the safe usage of the unit and information about the danger that can be caused by its improper usage.
-
Do not leave children unattended not to let them use the unit as a toy.
-
For children, for safety reasons do not leave polyethylene bags, used as packaging, unattended.
-
Attention! Do not allow children to play with polyethylene bags or packaging film. Danger of suffocation!
-
Do not dismantle the unit by yourself. If any malfunction is detected or after it was dropped, apply to the nearest authorized service center.
-
Transport the unit in the original package only.
-
Keep the unit out of reach of children and disabled persons.
THE UNIT IS INTENDED FOR HOUSEHOLD USAGE ONLY
BEFORE THE FIRST USE
After unit transportation or storage at low temperature, it is necessary to keep it for at least two hours at room temperature before switching on.
- Unpack the unit completely and remove any stickers that can prevent unit operation.
- Check the unit for damages; do not use it in case of damage.
- Wipe the unit body (1) with a soft, slightly damp cloth and then wipe dry.
- Rub the projection screen (5) and the attachments (6-13) with rubbing alcohol to disinfect them.
Installation of batteries
- Open the battery compartment lid (2) by sliding it towards you.
- Insert 2 «AA» batteries, strictly following the polarity (see the marks inside the battery compartment).
- Close the battery compartment lid (2).
USAGE
Manicure and pedicure attachments
- To protect your eyes during the manicure or pedicure procedure install the projection screen (5) into the setting place (4). The protection screen rotates around its axis clicking distinctively when its position is locked.
- Install the necessary attachment (6-13) on the installation place (4). The attachments are installed on the magnetic axis with an inner locking system, that‘s why it is recommended to turn the attachment slightly around its axis for proper installation and fixing. If the attachment is set properly, you‘ll hear a distinctive click.
- Use the switch (3) to select the required attachment rotation speed:
- «0» – the unit is off,
- «1» – low speed,
- «2»- high speed.
Note:
We recommend using the lower rotation speed for nail treatment and the higher
rotation speed for roughened skin treatment.
- After having finished the unit operation, set the switch (3) to the position «0».
ATTACHMENTS
We suggest the following options for using the manicure/pedicure attachments.
Attention: Always switch the unit off with the switch (3) before installing or
changing the attachments.
Carefully move the attachment along the surface being treated
Use coarse rollers (6, 8) to remove rough skin from your feet. Use fine
rollers (7, 9) to remove rough skin from hands, feet, and from between the
toes. Use the smoothing disc (10) to shape your nails. Use the cone attachment
(11) to treat rough skin and nails. Use the felt cone attachment (12) to
polish nails and give them an additional glare. Use the thin cylindrical
attachment (13) to remove sections of rough skin around the nails
Tips
Follow these recommendations to keep your nails healthy and achieve good results when using the pedicure set:
- Avoid getting irritant chemicals on your nails.
- Do not expose your hands and feet to cold temperatures. Always wear warm clothes when it‘s cold.
- Good nail hydration is a key to healthy and strong nails, resistant to nail peeling and fragility.
- Polish your nails before using a moisturizer.
- After a manicure procedure treats your nails with moisturizing cream or lotion.
- Use only high-quality nail polish to prevent nail peeling.
- Before removing cuticles first moisturize them and then lift them gently.
- For safe cuticle removal, use manicure clippers instead of scissors.
- To prevent nail thinning, smoothen and polish your nails at 7-10 days intervals.
Cleaning and care
- Switch the unit off before cleaning.
- Wipe the unit body (1) with a soft, slightly damp cloth and then wipe it dry.
- Do not use abrasive substances and solvents to clean the unit.
- Never immerse the unit body (1) into water or other liquids.
- Rub the projection screen (5) and the attachments (6-13) periodically with rubbing alcohol to disinfect them.
Storage
- Clean the unit.
- Remove the batteries from the battery compartment.
- Keep the unit away from children in a dry cool place.
Delivery set
- Unit body – 1 pc.
- Protection screen – 1 pc.
- Attachments – 8 pcs.
- «AA» batteries – 2 pcs.
- Instruction manual – 1 pc.
Technical specifications
Power supply: 2 « AA »-type batteries, 2×1,5 V
The manufacturer reserves the right to change the specifications of the unit without a preliminary notification.
Unit operating life is 3 years
Guarantee
Details regarding guarantee conditions can be obtained from the dealer from whom the appliance was purchased. The bill of sale or receipt must be produced when making any claim under the terms of this guarantee.
This product conforms to the EMCRequirements as laid down by the Council Directive 2004/108/EC and to the Low Voltage Regulation (2006/95/EC).
The production date of the item is indicated in the serial number on the technical data plate. A serial number is an eleven-unit number, with the first four figures indicating the production date. For example, serial number 0606XXXXXXX means that the item was manufactured in June (the sixth month) 2006.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>