Eureka Northern Breeze 10 Screen House Instructions
- June 10, 2024
- Eureka
Table of Contents
Eureka Northern Breeze 10 Screen House
INSTRUCTIONS I Northern Breeze 10 (2626301)
- Identify all tent components (see list below).
- Spread out the tent and locate the 4 corner webbing loops with ring and pin assemblies.
- Assemble all poles.
- Insert peak hub extensions into straight end of roof poles.
- Attach roof clips to top poles and eave shockcord to eave hooks.
- Insert tapered end of bottom pole: into top poles.
- Insert metal pin into end of each bottom pole.
- Attach all remaining clips to poles.
- Stake 4 corners and 8 guylines as shown.
AWNING SET UP
- Unzip gussets and extend awning fabric.
- Assemble awning poles and insert tips into grommetsat edge of awning fabric.
- Attach guylines to awning pole tips and guy out as shown.
TENT CONTENTS
- Screenhouse body with hub
- Aluminum roof poles (4) CURVED
- Aluminum leg poles (4) STRAIGHT
- Aluminum awning poles (3)
- Stakes (3) LONG
- Stakes (16) SHORT
- Guy lines (11)
TENT TIPS
- Always stake down tent, including all guyout points.
- Increase interior airflow by opening the windows in favorable weather.
TENT CARE
- Make sure the tent is completely dry, then store loosely rolled in a dry cool place.
- Clean your tent by setting it up and wiping it down with a mild soap and luke warm water. Never use laundry detergent, washing machines or dryers.
WARRANTY
- Your Eureka! tent is covered by a limited lifetime warranty. For more details please visit the website or contact customer service.
QUESTIONS
- Johnson Outdoors Gear, Inc.
- USA: 1-800-572-8822
- www.eurekacamping.com.
- Johnson Outdoors Canada
- Canada: 1-800-263-6390
- www.eurekatentscanada.com.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>