Nedis HTPN10FWT Plug-in Heater User Manual
- June 5, 2024
- nedis
Table of Contents
Nedis HTPN10FWT Plug-in Heater
User Manual
Preface
Thank you for purchasing the Nedis HTPN10FWT.
This document is the user manual and contains all the information for correct, efficient and safe use of the product.
This user manual is addressed to the end user. Read this information carefully before installing or using the product.
Always store this information with the product for use in the future.
Product description
The Nedis HTPN10FWT is a plug-in heater with a power of 400 W.
With the control buttons, the temperature can be set between 15 – 45 °C.
This device has a rotatable Type F Schuko CEE 7/4 type plug.
The two-speed fan ensures a comfortable airflow.
It has a digital display showing the set temperature.
Intended use
This device is intended as a heating device to be plugged directly into a wall outlet.
This product is only suitable for well insulated spaces or occasional use.
The product is intended for indoor use only.
The product is not intended for professional use.
Any modification of the product may have consequences for safety, warranty and proper functioning.
Specifications
Product
|
Plug-in heater
---|---
Article number
|
HTPN10FWT
Dimensions (l x w x h)
|
90 x 85 x 170 mm
Input voltage
|
AC 220 – 240 V ~ 50/60 Hz
Maximum power
|
400 W
Display
|
LED
Operating temperature
|
15 – 45°C
Timer
|
1 – 12 hours
Main parts (image A)
A
1. Temperature down button
2. Power button
3. Air outlet
4. Display
5. Temperature up button
6. Timer button
7. Power switch
8. Handle
9. Plug
10. Plug rotation button
11. Air inlet
Safety instructions
WARNING
- Read the instructions before use.
- Do not expose the product to water, rain, moisture or high humidity.
- Inspect the product for cracked or broken plugs or loose connections before each use. If frayed, worn or damaged, do not use the product.
- Keep the product out of reach from children.
- Contact a qualified technician for service/repair.
- Do not leave the product unattended when switched on.
- Turn off the product when you leave the room or go to sleep.
- Do not let pets or children play too close to the product.
- This heater is only meant to provide supplemental heat and should never be used to warm bedding, cook food, dry clothing or thaw pipes.
- Proper placement of the heater is critical. The heater must be kept at least three feet away from anything flammable, e.g. papers, clothing or rugs.
- Do not plug any other electrical devices into the same outlet as the heater.
- Keep the product at a distance from flammable objects such as furniture, curtains and similar.
- Do not use the product in rooms where flammable liquids or gases are used or stored.
- Do not block ventilation openings and make sure that there is enough space around the product.
- Do not put any objects into openings. Do not use with any opening blocked. Keep free of dust, lint hair etc.
- Switch off and unplug the product when not in use or before maintenance.
- Only plug the cable into a wall outlet. Do not use extension cords.
- Children under the age of 3 are not to use the product due to their inability to react to overheating.
- Do not cover the product when in use.
- Only use the product as described in this manual.
Installation
- Check the contents of the package
- Check that all parts are present and that no damage is visible on the parts. If parts are missing or damaged, contact the Nedis B.V. service desk via the website: www.nedis.com.
Install the heater (image B)
B
- Only use this device in the correct vertical position in a type F Schuko CEEE 7/3 wall outlet.
- The plug rotates 90 degrees to ensure upright placement.
1. Press and hold B 4 and gently rotate B 3.
2. Release B 4 to lock B 3 in place.
3. Hold B 1 to plug the product into a wall outlet.
4. Use the power switch B 2 to turn on the device.
Use
1. Press A 2 to start the heating function.
2. Use A 1 and A 5 to control the temperature.
- When the ambient temperature is higher than the set temperature of the heater, the heating element switches off, the fan continues working and the display flashes.
- When the ambient temperature is 3 degrees below the set temperature, the heating element switches on.
3. Press A 2 to switch off the heating function.
4. Use the power switch A 7 to turn off the device.
- Allow the product to cool down before unplugging.
- Allow the product to cool down before storage.
5. Pull the product at A 8 to unplug the product from the wall outlet.
Set timer
1. Press the A 6 to activate the timer.
2. Repeatedly press A 6 to set the desired amount of hours (1-12).
- To cancel the timer, restart the product.
- The product has a default timer setting of 12 hours.
Maintenance
- Clean the outside of the product with a soft, clean, lightly damp cloth.
- Do not use aggressive chemical cleaning agents such as ammonia, acid or acetone when cleaning the product.
- Wait until the product is completely dry before reconnecting the power.
Warranty
Any changes and/or modifications to the product will void the warranty. We accept no liability for damage caused by improper use of the product.
Disclaimer
Designs and specifications are subject to change without notice. All logos, brands and product names are trademarks or registered trademarks of their respective owners and are hereby recognized as such.
Disposal
|
This symbol indicates that this product should not be thrown away with other household waste throughout the EU. To prevent possible harm to the environment or human health by uncontrolled waste disposal, you are responsible for recycling it so that it can promote the sustainable reuse of raw materials. To return your used product, you can use the regular return and collection systems or contact the store where the product was purchased. They can recycle this product for the environment.
---|---