delimano BL1189 Personal Blender To Go User Manual

: June 5, 2024
: delimano

Table of Contents

delimano BL1189 Personal Blender To Go
Parts
Before use
Usage
Cleaning and maintenance
Troubleshooting
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

delimano BL1189 Personal Blender To Go

Thank you for selecting Delimano products!
Delimano brand brings innovative range of great quality kitchenware that is designed to provide healthy, tasty and enjoyable cooking experience (preparation, cooking and consumption of food), encouraging passion for cooking and entertaining no matter the level of cooking skills. Cook. Celebrate. Every day.
All Delimano products are perceived very valuable, so counterfeiters really like to copy us and thus abuse customers by worse quality with no warranty and service. Please, report any copied, counterfeit, similar product or unauthorised distributor to brand.protection@studio- moderna.com in order to help us fight against illegal counterfeits.

Delimano Joy Blender To Go – User Manual
Please read this manual thoroughly before using and save it for future reference.

WARNINGS

This device is intended for household, dry and indoor use only.
This device can be used by children aged from 8 years and above as well as by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the device in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance should not be done by children unless they are older than 8 and supervised.
Plug in power supply that corresponds to the rated one on product only. In case of misusage power supply or device failure may occur.
If the device is not working as it should, has received a sharp blow, has been dropped, damaged, left outdoors or dropped into water, do not use it.
Do not attempt any modification or repair by yourself and ensure that any repair is conducted only by appropriately qualified technician.
If the power cable is damaged, it must be replaced immediately by authorized and qualified person only.
This device should never be switched on or stay plugged in power supply when not in use, while replacing accessories or during cleaning.
Do not let cord hang over edge of table or hot surface.
Use extreme caution when manipulating the parts to avoid any injuries due to the sharp blades. Never touch the moving parts. Keep hands and utensils out of jar while blending to reduce the risk of severe injury to persons or damage to the blender.
Be careful when handing the sharp cutting blades, emptying the bowl and during cleaning
This device should never operate empty/unloaded, because such action could result in appliance failure and/or injuries to the user.
Before use, place the device on hard, flat, stable and dry surface.
The use of attachments or accessories not recommended or sold by the product distributor may cause personal or property hazards or injuries.
Do not operate the appliance for other than its intended use.
Be careful to not blend liquid hotter than 60 °C.
Please refer to below paragraphs about details on cleaning, operating and settings for accessories.
Although the product has been checked its usage and consequences are strictly user responsibility.

Parts

The Delimano Joy Blender To Go contains the following parts:

**_ _Pic. 1_ (_ see: PICTURES _, Pic. 1 )_**

1. Lid

2. Jar

| 3. Blade set

4. Main unit

| 5. Power button

6. Power cable

Before use

Unpack the device and remove all packaging materials. Check the device for signs of damage. If the device is damaged, it must not be used.
Clean and dry thoroughly before first use.
Before use, place the device on hard, flat, stable and dry surface.

Usage

Remove the lid from jar (if needed), place it on flat surface and fill it with ingredients. Be sure not to fill ingredients over the 600 ml MAX marking (see: PICTURES, Pic. 2)
Close the jar tightly with blade set by rotating it clockwise (see: PICTURES, Pic. 3).
Turn the jar upside down, locate arrow “ ” symbol on blade set and align it with unlock “ ” symbol on the main unit. Press the jar down and rotate it clockwise, to lock “ ” symbol position (see: PICTURES, Pic. 4).
4. Plug the device into power supply before pressing and holding the power button to blend.When done release the power button to stop (see: PICTURES, Pic. 5).

5. Remove the jar by roatating it counterclockwise before lifting it from the main unit. (see: PICTURES, Pic. 6).

6. Replace the blade set with the lid to close or easier drinking (see: PICTURES, Pic. 7).

NOTE: Device running time can not exceed 3 minutes. After 3 minutes, it is necessary to let it cool down before continuing with usage

Cleaning and maintenance

Plug the device from the power supply before cleaning or maintenance.
Disassemble the lid, jar and blade set before cleaning them in warm soapy water. Please be careful when cleaning the blade (see: PICTURES, Pic. 8).
3. Use a dry cloth to wipe the surface of the main unit. Never immerse it in water.
4. Make sure all parts are dried thoroughly before further use.

Troubleshooting

In case of abnormalities such as abnormal noises, smell, smoke, etc., you should immediately stop using the device and unplug it from power supply.
If the product doesn’t work, please check if the power supply is connected and everything is installed correctly first.
If the product still doesn’t work please check the table below and/or consult with your nearest dealer.

ISSUE	POSSIBLE CAUSES	POSSIBLE SOLUTION
Product does not work	The jar assembly is not installed correctly.	Install

the jar as described in the user manual.
Power button is not pressed.| Keep the power button pressed to blend.

Blender blade stuck

| The amount of contents in jar is too big.| Reduce the amount of contents.
Food stuck on the blade.| Unplug the device from power supply and remove the excessive ingredients from the blade with non-metal tool. Avoid direct contact with blades.
The blender emits abnormal odor, heat, smoke etc.| The amount of contents in jar is too big.| Reduce the amount of contents.
The running time longer than 3 minutes.| Let the device cool down fro few minutes before continuing with usage.
The temperature of the contents is too high.| The temperature of the contents should not be more than 60 °C.

Jar leaks

| The blade set seal is missing or not properly installed on the blade housing.| Check the blade set seal and install it correctly.
The blade set is not screwed enough to the jar. .| Clean both parts and make sure to tighten the blade set to jar enough.
The lid is not screwed enough to the jar.| Clean both parts and make sure to tighten the lid to jar enough.