ansult 016874 LED Christmas Tree Lights Instruction Manual
- June 6, 2024
- ansult
Table of Contents
ansult 016874 LED Christmas Tree Lights
SAFETY INSTRUCTIONS
- Do not connect the product to a power point while the product is still in the pack.
- Intended for indoor use.
- Check that no light sources are damaged.
- Do not connect two or more string lights together electrically.
- No parts of the product can be replaced, or repaired. The whole product must be discarded if any part is damaged.
- Do not use sharp or pointed objects during assembly.
- Do not subject the power cord or wires to mechanical stress. Do not hang objects on the string light.
- This is not a toy. Be careful if using the product near children.
- Disconnect the transformer from the power point when the product is not in use.
- This product must only be used together with the supplied transformer and must never be connected directly to the mains supply without a transformer.
- The product is not intended to be used as general lighting.
- Recycle products that have reached the end of their useful life according to local regulations.
WARNING! The product must only be used when all the seals are correctly fitted.
Care for the environment!
Must not be discarded with household waste! This product contains electrical
or electronic components that should be recycled. Leave the product for
recycling at the designated station e.g. the local authority’s recycling
station.
Jula reserves the right to make changes. In the event of problems, please
contact our customer service. www.jula.com
Symbols
TECHNICAL DATA
- Rated input voltage: 230 V ~ 50 Hz
- Output: 3.6 W
- No. of LEDs: 25
- Protection rating: IP20
USE
- Remove the product from the packaging.
- Hang up the product in the required place.
- Insert the plug into the mains power supply.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>